Applies to: Exchange Server 2010 SP3, Exchange Server 2010 SP2
Topic Last Modified: 2011-08-05
Use the Get-NetworkConnectionInfo cmdlet to view the network configuration information for all network adapters configured on the local server.
Syntax
Get-NetworkConnectionInfo [-Identity
<ServerIdParameter>] [-DomainController <Fqdn>]
|
Detailed Description
This cmdlet retrieves the following configuration information for each network adapter configured on a computer running Microsoft Exchange Server 2010:
- Name This field displays the name of
the network adapter. This name indicates the manufacturer and model
of the network adapter, or the administrator-specified name of the
network adapter.
- DnsServers This field displays the
Domain Name System (DNS) servers used by the network adapter. The
server names are separated by commas.
- IPAddresses This field displays the IP
addresses used by the network adapter. The IP addresses are
separated by commas.
- AdapterGuid This field displays the
GUID assigned to the network adapter by Windows.
- MacAddress This field displays the
media access control (MAC) address of the network adapter.
You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Hub server" and "Edge server" entries in the Transport Permissions topic.
Parameters
| Parameter | Required | Type | Description |
|---|---|---|---|
|
DomainController |
Optional |
Microsoft.Exchange.Data.Fqdn |
The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that retrieves data from Active Directory. The DomainController parameter isn't supported on the Edge Transport server role. The Edge Transport server role reads only from the Active Directory Lightweight Directory Services (AD LDS) instance. |
|
Identity |
Optional |
Microsoft.Exchange.Configuration.Tasks.ServerIdParameter |
Use the Server parameter to specify the name of the server to query when the command is run. |
Input Types
To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn’t accept input data.
Return Types
To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn’t return data.
Examples
EXAMPLE 1
This example retrieves network configuration
information for all network adapters on the server
Hub01.
 Copy Code |
|
|---|---|
Get-NetworkConnectionInfo -Identity Hub01 |
|