Identity

Required

Microsoft.Exchange.Configuration.Tasks.ThrottlingPolicyIdParameter

The Identity parameter uniquely identifies the throttling policy that you want to modify values for. The name you use is the name of the throttling policy object in Active Directory.

AnonymousMaxConcurrency

Optional

System.UInt32

The AnonymousMaxConcurrency parameter specifies how many anonymous connections can be made to a user's calendar data at the same time. A connection is held from the moment a request is received until a response is sent in its entirety to the requestor. If anonymous users attempt to make more concurrent requests than their policy allows, the new connection attempt fails. However, the existing connections remain valid. The AnonymousMaxConcurrency parameter has a valid range from 0 through 2147483647 inclusive. The default value is 1. To indicate that the number of concurrent connections should be unthrottled (no limit), this value should be set to $null.

AnonymousPercentTimeInAD

Optional

System.UInt32

The AnonymousPercentTimeInAD parameter specifies the percentage of a minute that anonymous users can spend executing LDAP requests (PercentTimeInAD) to a user's calendar data. A value of 100 indicates that for every one-minute window, the user can spend 60 seconds of that time consuming the resource in question.

AnonymousPercentTimeInCAS

Optional

System.UInt32

The AnonymousPercentTimeInCAS parameter specifies the percentage of a minute that anonymous users can spend executing Client Access server code (PercentTimeInCAS) to a user's calendar data. A value of 100 indicates that for every one-minute window, the user can spend 60 seconds of that time consuming the resource in question.

AnonymousPercentTimeInMailboxRPC

Optional

System.UInt32

The AnonymousPercentTimeInMailboxRPC parameter specifies the percentage of a minute that anonymous users can spend executing mailbox RPC requests (PercentTimeInMailboxRPC) to a user's calendar data. A value of 100 indicates that for every one-minute window, the user can spend 60 seconds of that time consuming the resource in question.

Confirm

Optional

System.Management.Automation.SwitchParameter

The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.

CPAMaxConcurrency

Optional

System.UInt32

The CPAMaxConcurrency parameter specifies how many concurrent connections a cross-premises user can have against an Exchange server at one time. A connection is held from the moment a request is received until a response is sent in its entirety to the requestor. If users attempt to make more concurrent requests than their policy allows, the new connection attempt fails. However, the existing connections remain valid. The CPAMaxConcurrency parameter has a valid range from 0 through 2147483647 inclusive. To indicate that the number of concurrent connections should be unthrottled (no limit), this value should be set to $null.

CPAPercentTimeInCAS

Optional

System.UInt32

The CPAPercentTimeInCAS parameter specifies the percentage of a minute that a cross-premises user can spend executing Client Access server code (PercentTimeInCAS). A value of 100 indicates that for every one-minute window, the user can spend 60 seconds of that time consuming the resource in question.

CPAPercentTimeInMailboxRPC

Optional

System.UInt32

The CPAPercentTimeInMailboxRPC parameter specifies the percentage of a minute that a cross-premises user can spend executing mailbox RPC requests (PercentTimeInMailboxRPC). A value of 100 indicates that for every one-minute window, the user can spend 60 seconds of that time consuming the resource in question.

CPUStartPercent

Optional

System.UInt32

The CPUStartPercent parameter specifies the per-process CPU percentage at which users governed by this policy begin to be backed off. Valid values are from 0 through 100. Use $null to turn off CPU percentage-based throttling for this policy.

DomainController

Optional

Microsoft.Exchange.Data.Fqdn

The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.

EASMaxConcurrency

Optional

System.UInt32

The EASMaxConcurrency parameter indicates how many concurrent connections a Microsoft Exchange ActiveSync user can have against a server running Microsoft Exchange Server 2010 at one time. A connection is held from the moment a request is received until a response is sent in its entirety to the requestor. If users attempt to make more concurrent requests than their policy allows, the new connection attempt fails. However, the existing connections remain valid. The EASMaxConcurrency parameter has a valid range from 0 through 2147483647 inclusive. The default value is 10. To indicate that the number of concurrent connections should be unthrottled (no limit), this value should be set to $null.

EASMaxDeviceDeletesPerMonth

Optional

System.UInt32

The EASMaxDeviceDeletesPerMonth parameter specifies a limit to the number of Exchange ActiveSync partnerships that a user can delete per month. By default, each user can delete a maximum of 20 partnerships per calendar month. When the limit is reached, the partnership deletion attempt fails and an error message is displayed to the user.

EASMaxDevices

Optional

System.UInt32

The EASMaxDevices parameter specifies a limit to the number of Exchange ActiveSync partnerships that a user can have at one time. By default, each user can create 10 Exchange ActiveSync partnerships with their Exchange account. After users exceed the limit, they must delete one of their existing partnerships before they can create any more new partnerships. An e-mail error message describing the limitation is sent to the user when the limit is exceeded. Additionally, an event is logged in the Application log when a user exceeds the limit.

EASPercentTimeInAD

Optional

System.UInt32

The EASPercentTimeInAD parameter specifies the percentage of a minute that an Exchange ActiveSync user can spend executing LDAP requests (PercentTimeInAD). A value of 100 indicates that for every one-minute window, the user can spend 60 seconds of that time consuming the resource in question.

EASPercentTimeInCAS

Optional

System.UInt32

The EASPercentTimeInCAS parameter specifies the percentage of a minute that an Exchange ActiveSync user can spend executing Client Access server code (PercentTimeInCAS). A value of 100 indicates that for every one-minute window, the user can spend 60 seconds of that time consuming the resource in question.

EASPercentTimeInMailboxRPC

Optional

System.UInt32

The EASPercentTimeInMailboxRPC parameter specifies the percentage of a minute that an Exchange ActiveSync user can spend executing mailbox RPC requests (PercentTimeInMailboxRPC). A value of 100 indicates that for every one-minute window, the user can spend 60 seconds of that time consuming the resource in question.

EWSFastSearchTimeoutInSeconds

Optional

System.UInt32

The EWSFastSearchTimeoutInSeconds parameter specifies the amount of time that searches made using Exchange Web Services continue before they time out. If the search takes more than the time indicated by the policy value, the search stops and an error is returned. The default value of this setting is 60 seconds.

EWSFindCountLimit

Optional

System.UInt32

The EWSFindCountLimit parameter specifies the maximum result size of FindItem or FindFolder calls that can exist in memory on the Client Access server at the same time for this user in this current process. If an attempt is made to find more items or folders than your policy limit allows, an error is returned. However, the limit isn't strictly enforced if the call is made within the context of an indexed page view. Specifically, in this scenario, the search results are truncated to include the number of items and folders that fit within the policy limit. You can then continue paging into your results set via further FindItem or FindFolder calls.

EWSMaxConcurrency

Optional

System.UInt32

The EWSMaxConcurrency parameter specifies how many concurrent connections an Exchange Web Services user can have against an Exchange server at one time. A connection is held from the moment a request is received until a response is sent in its entirety to the requestor. If users attempt to make more concurrent requests than their policy allows, the new connection attempt fails. However, the existing connections remain valid. The EWSMaxConcurrency parameter has a valid range from 0 through 2147483647 inclusive. The default value is 10. To indicate that the number of concurrent connections should be unthrottled (no limit), this value should be set to $null.

EWSMaxSubscriptions

Optional

System.UInt32

The EWSMaxSubscriptions parameter specifies the maximum number of active push and pull subscriptions that a user can have on a specific Client Access server at the same time. If a user tries to create more subscriptions than the configured maximum, the subscription fails, and an event is logged in Event Viewer.

EWSPercentTimeInAD

Optional

System.UInt32

The EWSPercentTimeInAD parameter specifies the percentage of a minute that an Exchange Web Services user can spend executing LDAP requests (PercentTimeInAD). A value of 100 indicates that for every one-minute window, the user can spend 60 seconds of that time consuming the resource in question.

EWSPercentTimeInCAS

Optional

System.UInt32

The EWSPercentTimeInCAS parameter specifies the percentage of a minute that an Exchange Web Services user can spend executing Client Access server code (PercentTimeInCAS). A value of 100 indicates that for every one-minute window, the user can spend 60 seconds of that time consuming the resource in question.

EWSPercentTimeInMailboxRPC

Optional

System.UInt32

The EWSPercentTimeInMailboxRPC parameter specifies the percentage of a minute that an Exchange Web Services user can spend executing mailbox RPC requests (PercentTimeInMailboxRPC). A value of 100 indicates that for every one-minute window, the user can spend 60 seconds of that time consuming the resource in question.

ExchangeMaxCmdlets

Optional

System.UInt32

The ExchangeMaxCmdlets parameter specifies the number of cmdlets that can be executed within a specific time period before their execution is slowed down. The value specified by this parameter should be less than the value specified by the PowerShellMaxCmdlets parameter.

The time period used for this limit is specified by the PowerShellMaxCmdletsTimePeriod parameter. We recommend that you set values for both parameters at the same time.

ForwardeeLimit

Optional

System.UInt32

The ForwardeeLimit parameter specifies the limits for the number of recipients that can be configured in Inbox Rules when using the forward or redirect action. This parameter doesn't limit the number of messages that can be forwarded or redirected to the recipients that are configured.

IMAPMaxConcurrency

Optional

System.UInt32

The IMAPMaxConcurrency parameter specifies how many concurrent connections an IMAP user can have against an Exchange server at one time. A connection is held from the moment a request is received until a response is sent in its entirety to the requestor. If users attempt to make more concurrent requests than their policy allows, the new connection attempt fails. However, the existing connections remain valid. The IMAPMaxConcurrency parameter has a valid range from 0 through 2147483647 inclusive. To indicate that the number of concurrent connections should be unthrottled (no limit), this value should be set to $null.

IMAPPercentTimeInAD

Optional

System.UInt32

The IMAPPercentTimeInAD parameter specifies the percentage of a minute that an IMAP user can spend executing LDAP requests (PercentTimeInAD). A value of 100 indicates that for every one-minute window, the user can spend 60 seconds of that time consuming the resource in question.

IMAPPercentTimeInCAS

Optional

System.UInt32

The IMAPPercentTimeInCAS parameter specifies the percentage of a minute that an IMAP user can spend executing Client Access server code (PercentTimeInCAS). A value of 100 indicates that for every one-minute window, the user can spend 60 seconds of that time consuming the resource in question.

IMAPPercentTimeInMailboxRPC

Optional

System.UInt32

The IMAPPercentTimeInMailboxRPC parameter specifies the percentage of a minute that an IMAP user can spend executing mailbox RPC requests (PercentTimeInMailboxRPC). A value of 100 indicates that for every one-minute window, the user can spend 60 seconds of that time consuming the resource in question.

MessageRateLimit

Optional

System.UInt32

The MessageRateLimit parameter specifies the number of messages per minute that can be submitted to transport. For messages submitted through the Mailbox server role (using Microsoft Outlook, Microsoft Office Outlook Web App, Exchange ActiveSync, or Exchange Web Services), this results in the deferral of messages until the quota for the user is available. Specifically, messages appear in the Outbox or Drafts folder for longer periods of time when users submit messages at a rate greater than the MessageRateLimit parameter.

For POP or IMAP clients submitting messages directly to transport using SMTP, clients receive a transient error if they submit at a rate that exceeds the MessageRateLimit parameter. Exchange attempts to connect and send the messages at a later time.

Name

Optional

System.String

The Name parameter specifies the name of the object in Active Directory. The default policy is named DefaultThrottlingPolicy<GUID>.

OWAMaxConcurrency

Optional

System.UInt32

The OWAMaxConcurrency parameter specifies how many concurrent connections an Outlook Web App user can have against an Exchange server at one time. A connection is held from the moment a request is received until a response is sent in its entirety to the requestor. If users attempt to make more concurrent requests than their policy allows, the new connection attempt fails. However, the existing connections remain valid. The OWAMaxConcurrency parameter has a valid range from 0 through 2147483647 inclusive. The default value is 5. To indicate that the number of concurrent connections should be unthrottled (no limit), this value should be set to $null.

OWAPercentTimeInAD

Optional

System.UInt32

The OWAPercentTimeInAD parameter specifies the percentage of a minute that an Outlook Web App user can spend executing LDAP requests (PercentTimeInAD). A value of 100 indicates that for every one-minute window, the user can spend 60 seconds of that time consuming the resource in question.

OWAPercentTimeInCAS

Optional

System.UInt32

The OWAPercentTimeInCAS parameter specifies the percentage of a minute that an Outlook Web App user can spend executing Client Access server code (PercentTimeInCAS). A value of 100 indicates that for every one-minute window, the user can spend 60 seconds of that time consuming the resource in question.

OWAPercentTimeInMailboxRPC

Optional

System.UInt32

The OWAPercentTimeInMailboxRPC parameter specifies the percentage of a minute that an Outlook Web App user can spend executing mailbox RPC requests (PercentTimeInMailboxRPC). A value of 100 indicates that for every one-minute window, the user can spend 60 seconds of that time consuming the resource in question.

POPMaxConcurrency

Optional

System.UInt32

The POPMaxConcurrency parameter specifies how many concurrent connections a POP user can have against an Exchange server at one time. A connection is held from the moment a request is received until a response is sent in its entirety to the requestor. If users attempt to make more concurrent requests than their policy allows, the new connection attempt fails. However, the existing connections remain valid. The POPMaxConcurrency parameter has a valid range from 0 through 2147483647 inclusive. The default value is 20. To indicate that the number of concurrent connections should be unthrottled (no limit), this value should be set to $null.

POPPercentTimeInAD

Optional

System.UInt32

The POPPercentTimeInAD parameter specifies the percentage of a minute a POP user can spend executing LDAP requests (PercentTimeInAD). A value of 100 indicates that for every one-minute window, the user can spend 60 seconds of that time consuming the resource in question.

POPPercentTimeInCAS

Optional

System.UInt32

The POPPercentTimeInCAS parameter specifies the percentage of a minute a POP user can spend executing Client Access server code (PercentTimeInCAS). A value of 100 indicates that for every one-minute window, the user can spend 60 seconds of that time consuming the resource in question.

POPPercentTimeInMailboxRPC

Optional

System.UInt32

The POPPercentTimeInMailboxRPC parameter specifies the percentage of a minute a POP user can spend executing mailbox RPC requests (PercentTimeInMailboxRPC). A value of 100 indicates that for every one-minute window, the user can spend 60 seconds of that time consuming the resource in question.

PowerShellMaxCmdletQueueDepth

Optional

System.UInt32

The PowerShellMaxCmdletQueueDepth parameter specifies the number of operations allowed to be executed by the user. This value directly affects the behavior of the PowerShellMaxCmdlets and PowerShellMaxConcurrency parameters. For example, the PowerShellMaxConcurrency parameter consumes at least two operations defined by the PowerShellMaxCmdletQueueDepth parameter but additional operations are also consumed by per cmdlet execution. The number of operations depends on the cmdlets that are executed. We recommend that the value for the PowerShellMaxCmdletQueueDepth parameter be at least three times larger than the value of the PowerShellMaxConcurrency parameter. This parameter won't affect Exchange Control Panel operations or Exchange Web Services operations.

PowerShellMaxCmdlets

Optional

System.UInt32

The PowerShellMaxCmdlets parameter specifies the number of cmdlets that can be executed within a specific time period before their execution is stopped. The value specified by this parameter should be more than the value specified by the ExchangeMaxCmdlets parameter. The time period used for this limit is specified by the PowerShellMaxCmdletsTimePeriod parameter. Both values should be set at the same time.

PowerShellMaxCmdletsTimePeriod

Optional

System.UInt32

The PowerShellMaxCmdletsTimePeriod parameter specifies the time period, in seconds, that the throttling policy uses to determine whether the number of cmdlets being executed exceeds the limits specified by the PowerShellMaxCmdlets and ExchangeMaxCmdlets parameters.

PowerShellMaxConcurrency

Optional

System.UInt32

The PowerShellMaxConcurrency parameter specifies different information depending on context:

• In the context of Remote PowerShell, the PowerShellMaxConcurrency parameter specifies the maximum number of Remote PowerShell sessions that a Remote PowerShell user can have open at the same time.
  
  
• In the context of Exchange Web Services, the PowerShellMaxConcurrency parameter specifies the number of concurrent cmdlet executions that a user can have at the same time.
  
  

This parameter value doesn't necessarily correlate to the number of browsers opened by the user.

PowerShellMaxDestructiveCmdlets

Optional

System.UInt32

The PowerShellMaxDestructiveCmdlets parameter specifies the number of destructive cmdlets that can be executed within a specific time period before their execution is stopped. Destructive cmdlets are cmdlets that can make significant changes to user data and configuration settings in your Exchange organization. Throttling these cmdlets may help prevent accidental data loss. The following cmdlets are designated as destructive:

• Disable-Mailbox
  
  
• Move-ActiveMailboxDatabase
  
  
• Remove-AcceptedDomain
  
  
• Remove-Mailbox
  
  
• Remove-MailUser
  
  
• Remove-Organization
  
  
• Remove-SecondaryDomain
  
  
• Remove-SyncMailbox
  
  
• Remove-SyncMailUser
  
  
• Set-Mailbox
  
  
• Set-MailUser
  
  
• Set-SyncMailbox
  
  
• Set-SyncMailUser
  
  
• Start-OrganizationUpgrade
  
  
• Update-MailboxDatabaseCopy
  
  

The time period used for this limit is specified by the PowerShellMaxDestructiveCmdletsTimePeriod parameter. Both values should be set at the same time. This feature isn't enabled by default. For more information, see the example later in this topic.

PowerShellMaxDestructiveCmdletsTimePeriod

Optional

System.UInt32

The PowerShellMaxDestructiveCmdletsTimePeriod parameter specifies the time period, in seconds, that the throttling policy uses to determine how many destructive cmdlets can be run. You set a value for this parameter when set the PowerShellMaxDesctructiveCmdlets parameter. Both values should be set at the same time. For more information, see the description for the PowerShellMaxDesctructiveCmdlets parameter.

PowerShellMaxTenantConcurrency

Optional

System.UInt32

The PowerShellMaxTenantConcurrency parameter limits the number of concurrent Windows PowerShell connections per tenant organization. By default, the limit for concurrent Windows PowerShell connections per tenant organization is set to 9. If users in a tenant organization try to make more concurrent requests than the limit set by the PowerShellMaxTenantConcurrency parameter, the new connection attempt fails. However, the existing connections remain valid. This limit is enforced even if a single user hasn't exceeded the per-user limit set by the PowerShellMaxConcurrency parameter. The PowerShellMaxTenantConcurrency parameter has a valid range from 0 through 100 inclusive. To indicate that the number of concurrent connections should be unthrottled (no limit), this value should be set to $null.

Note:
This property can only be set for the default throttling policy.

RCAMaxConcurrency

Optional

System.UInt32

The RCAMaxConcurrency parameter indicates how many concurrent connections an RPC Client Access user can have against a server running Exchange 2010 at one time. A connection is held from the moment a request is received until the connection is closed or the connection is otherwise disconnected (for example, if the user goes offline). If users attempt to make more concurrent requests than their policy allows, the new connection attempt fails. However, the existing connections remain valid. The RCAMaxConcurrency parameter has a valid range from 0 through 2147483647 inclusive. The default value is 20. To indicate that the number of concurrent connections should be unthrottled (no limit), this value should be set to $null.

RCAPercentTimeInAD

Optional

System.UInt32

The RCAPercentTimeInAD parameter specifies the percentage of a minute that an Outlook user can spend executing directory requests. A value of 100 indicates that for every one-minute window, the user can spend 60 seconds of that time consuming the resource in question.

RCAPercentTimeInCAS

Optional

System.UInt32

The RCAPercentTimeInCAS parameter specifies the percentage of a minute that an Outlook user can spend executing Client Access server mailbox requests. A value of 100 indicates that for every one-minute window, the user can spend 60 seconds of that time consuming the resource in question.

RCAPercentTimeInMailboxRPC

Optional

System.UInt32

The RCAPercentTimeInMailboxRPC parameter specifies the percentage of a minute that an RPC Client Access user can spend executing mailbox RPC requests (PercentTimeInMailboxRPC). A value of 100 indicates that for every one-minute window, the user can spend 60 seconds of that time consuming the resource in question.

RecipientRateLimit

Optional

System.UInt32

The RecipientRateLimit parameter specifies the limits on the number of recipients that a user can address in a 24-hour period.

WhatIf

Optional

System.Management.Automation.SwitchParameter

The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.