[This topic is in progress.]

Applies to: Exchange Server 2010 SP3, Exchange Server 2010 SP2

Topic Last Modified: 2012-12-04

Use the New-ReceiveConnector cmdlet to create a new Receive connector on a computer that has the Hub Transport server role or the Edge Transport server role installed.

Syntax


New-ReceiveConnector -Name <String> -Bindings <MultiValuedProperty> -RemoteIPRanges <MultiValuedProperty> [-AdvertiseClientSettings <$true \| $false>] [-AuthMechanism <None \| Tls \| Integrated \| BasicAuth \| BasicAuthRequireTLS \| ExchangeServer \| ExternalAuthoritative>] [-Banner <String>] [-BinaryMimeEnabled <$true \| $false>] [-ChunkingEnabled <$true \| $false>] [-Comment <String>] [-Confirm [<SwitchParameter>]] [-ConnectionInactivityTimeout <EnhancedTimeSpan>] [-ConnectionTimeout <EnhancedTimeSpan>] [-Custom <SwitchParameter>] [-DefaultDomain <AcceptedDomainIdParameter>] [-DeliveryStatusNotificationEnabled <$true \| $false>] [-DomainController <Fqdn>] [-DomainSecureEnabled <$true \| $false>] [-EightBitMimeEnabled <$true \| $false>] [-EnableAuthGSSAPI <$true \| $false>] [-Enabled <$true \| $false>] [-EnhancedStatusCodesEnabled <$true \| $false>] [-ExtendedProtectionPolicy <None \| Allow \| Require>] [-Fqdn <Fqdn>] [-LiveCredentialEnabled <$true \| $false>] [-LongAddressesEnabled <$true \| $false>] [-MaxAcknowledgementDelay <EnhancedTimeSpan>] [-MaxHeaderSize <ByteQuantifiedSize>] [-MaxHopCount <Int32>] [-MaxInboundConnection <Unlimited>] [-MaxInboundConnectionPercentagePerSource <Int32>] [-MaxInboundConnectionPerSource <Unlimited>] [-MaxLocalHopCount <Int32>] [-MaxLogonFailures <Int32>] [-MaxMessageSize <ByteQuantifiedSize>] [-MaxProtocolErrors <Unlimited>] [-MaxRecipientsPerMessage <Int32>] [-MessageRateLimit <Unlimited>] [-MessageRateSource <None \| IPAddress \| User \| All>] [-OrarEnabled <$true \| $false>] [-PermissionGroups <None \| AnonymousUsers \| ExchangeUsers \| ExchangeServers \| ExchangeLegacyServers \| Partners \| Custom>] [-PipeliningEnabled <$true \| $false>] [-ProtocolLoggingLevel <None \| Verbose>] [-RequireEHLODomain <$true \| $false>] [-RequireTLS <$true \| $false>] [-Server <ServerIdParameter>] [-SizeEnabled <Disabled \| Enabled \| EnabledWithoutValue>] [-SuppressXAnonymousTls <$true \| $false>] [-TarpitInterval <EnhancedTimeSpan>] [-TlsDomainCapabilities <MultiValuedProperty>] [-WhatIf [<SwitchParameter>]]

New-ReceiveConnector -Name <String> -Bindings
<MultiValuedProperty> -RemoteIPRanges
<MultiValuedProperty> [-AdvertiseClientSettings <$true |
$false>] [-AuthMechanism <None | Tls | Integrated | BasicAuth
| BasicAuthRequireTLS | ExchangeServer | ExternalAuthoritative>]
[-Banner <String>] [-BinaryMimeEnabled <$true |
$false>] [-ChunkingEnabled <$true | $false>] [-Comment
<String>] [-Confirm [<SwitchParameter>]]
[-ConnectionInactivityTimeout <EnhancedTimeSpan>]
[-ConnectionTimeout <EnhancedTimeSpan>] [-Custom
<SwitchParameter>] [-DefaultDomain
<AcceptedDomainIdParameter>]
[-DeliveryStatusNotificationEnabled <$true | $false>]
[-DomainController <Fqdn>] [-DomainSecureEnabled <$true |
$false>] [-EightBitMimeEnabled <$true | $false>]
[-EnableAuthGSSAPI <$true | $false>] [-Enabled <$true |
$false>] [-EnhancedStatusCodesEnabled <$true | $false>]
[-ExtendedProtectionPolicy <None | Allow | Require>] [-Fqdn
<Fqdn>] [-LiveCredentialEnabled <$true | $false>]
[-LongAddressesEnabled <$true | $false>]
[-MaxAcknowledgementDelay <EnhancedTimeSpan>] [-MaxHeaderSize
<ByteQuantifiedSize>] [-MaxHopCount <Int32>]
[-MaxInboundConnection <Unlimited>]
[-MaxInboundConnectionPercentagePerSource <Int32>]
[-MaxInboundConnectionPerSource <Unlimited>]
[-MaxLocalHopCount <Int32>] [-MaxLogonFailures <Int32>]
[-MaxMessageSize <ByteQuantifiedSize>] [-MaxProtocolErrors
<Unlimited>] [-MaxRecipientsPerMessage <Int32>]
[-MessageRateLimit <Unlimited>] [-MessageRateSource <None
| IPAddress | User | All>] [-OrarEnabled <$true | $false>]
[-PermissionGroups <None | AnonymousUsers | ExchangeUsers |
ExchangeServers | ExchangeLegacyServers | Partners | Custom>]
[-PipeliningEnabled <$true | $false>] [-ProtocolLoggingLevel
<None | Verbose>] [-RequireEHLODomain <$true | $false>]
[-RequireTLS <$true | $false>] [-Server
<ServerIdParameter>] [-SizeEnabled <Disabled | Enabled |
EnabledWithoutValue>] [-SuppressXAnonymousTls <$true |
$false>] [-TarpitInterval <EnhancedTimeSpan>]
[-TlsDomainCapabilities <MultiValuedProperty>] [-WhatIf
[<SwitchParameter>]]


New-ReceiveConnector -Name <String> -Bindings <MultiValuedProperty> -Internet <SwitchParameter> [-AdvertiseClientSettings <$true \| $false>] [-AuthMechanism <None \| Tls \| Integrated \| BasicAuth \| BasicAuthRequireTLS \| ExchangeServer \| ExternalAuthoritative>] [-Banner <String>] [-BinaryMimeEnabled <$true \| $false>] [-ChunkingEnabled <$true \| $false>] [-Comment <String>] [-Confirm [<SwitchParameter>]] [-ConnectionInactivityTimeout <EnhancedTimeSpan>] [-ConnectionTimeout <EnhancedTimeSpan>] [-DefaultDomain <AcceptedDomainIdParameter>] [-DeliveryStatusNotificationEnabled <$true \| $false>] [-DomainController <Fqdn>] [-DomainSecureEnabled <$true \| $false>] [-EightBitMimeEnabled <$true \| $false>] [-EnableAuthGSSAPI <$true \| $false>] [-Enabled <$true \| $false>] [-EnhancedStatusCodesEnabled <$true \| $false>] [-ExtendedProtectionPolicy <None \| Allow \| Require>] [-Fqdn <Fqdn>] [-LiveCredentialEnabled <$true \| $false>] [-LongAddressesEnabled <$true \| $false>] [-MaxAcknowledgementDelay <EnhancedTimeSpan>] [-MaxHeaderSize <ByteQuantifiedSize>] [-MaxHopCount <Int32>] [-MaxInboundConnection <Unlimited>] [-MaxInboundConnectionPercentagePerSource <Int32>] [-MaxInboundConnectionPerSource <Unlimited>] [-MaxLocalHopCount <Int32>] [-MaxLogonFailures <Int32>] [-MaxMessageSize <ByteQuantifiedSize>] [-MaxProtocolErrors <Unlimited>] [-MaxRecipientsPerMessage <Int32>] [-MessageRateLimit <Unlimited>] [-MessageRateSource <None \| IPAddress \| User \| All>] [-OrarEnabled <$true \| $false>] [-PermissionGroups <None \| AnonymousUsers \| ExchangeUsers \| ExchangeServers \| ExchangeLegacyServers \| Partners \| Custom>] [-PipeliningEnabled <$true \| $false>] [-ProtocolLoggingLevel <None \| Verbose>] [-RemoteIPRanges <MultiValuedProperty>] [-RequireEHLODomain <$true \| $false>] [-RequireTLS <$true \| $false>] [-Server <ServerIdParameter>] [-SizeEnabled <Disabled \| Enabled \| EnabledWithoutValue>] [-SuppressXAnonymousTls <$true \| $false>] [-TarpitInterval <EnhancedTimeSpan>] [-TlsDomainCapabilities <MultiValuedProperty>] [-WhatIf [<SwitchParameter>]]

New-ReceiveConnector -Name <String> -Bindings
<MultiValuedProperty> -Internet <SwitchParameter>
[-AdvertiseClientSettings <$true | $false>] [-AuthMechanism
<None | Tls | Integrated | BasicAuth | BasicAuthRequireTLS |
ExchangeServer | ExternalAuthoritative>] [-Banner
<String>] [-BinaryMimeEnabled <$true | $false>]
[-ChunkingEnabled <$true | $false>] [-Comment <String>]
[-Confirm [<SwitchParameter>]] [-ConnectionInactivityTimeout
<EnhancedTimeSpan>] [-ConnectionTimeout
<EnhancedTimeSpan>] [-DefaultDomain
<AcceptedDomainIdParameter>]
[-DeliveryStatusNotificationEnabled <$true | $false>]
[-DomainController <Fqdn>] [-DomainSecureEnabled <$true |
$false>] [-EightBitMimeEnabled <$true | $false>]
[-EnableAuthGSSAPI <$true | $false>] [-Enabled <$true |
$false>] [-EnhancedStatusCodesEnabled <$true | $false>]
[-ExtendedProtectionPolicy <None | Allow | Require>] [-Fqdn
<Fqdn>] [-LiveCredentialEnabled <$true | $false>]
[-LongAddressesEnabled <$true | $false>]
[-MaxAcknowledgementDelay <EnhancedTimeSpan>] [-MaxHeaderSize
<ByteQuantifiedSize>] [-MaxHopCount <Int32>]
[-MaxInboundConnection <Unlimited>]
[-MaxInboundConnectionPercentagePerSource <Int32>]
[-MaxInboundConnectionPerSource <Unlimited>]
[-MaxLocalHopCount <Int32>] [-MaxLogonFailures <Int32>]
[-MaxMessageSize <ByteQuantifiedSize>] [-MaxProtocolErrors
<Unlimited>] [-MaxRecipientsPerMessage <Int32>]
[-MessageRateLimit <Unlimited>] [-MessageRateSource <None
| IPAddress | User | All>] [-OrarEnabled <$true | $false>]
[-PermissionGroups <None | AnonymousUsers | ExchangeUsers |
ExchangeServers | ExchangeLegacyServers | Partners | Custom>]
[-PipeliningEnabled <$true | $false>] [-ProtocolLoggingLevel
<None | Verbose>] [-RemoteIPRanges
<MultiValuedProperty>] [-RequireEHLODomain <$true |
$false>] [-RequireTLS <$true | $false>] [-Server
<ServerIdParameter>] [-SizeEnabled <Disabled | Enabled |
EnabledWithoutValue>] [-SuppressXAnonymousTls <$true |
$false>] [-TarpitInterval <EnhancedTimeSpan>]
[-TlsDomainCapabilities <MultiValuedProperty>] [-WhatIf
[<SwitchParameter>]]


New-ReceiveConnector -Name <String> -Internal <SwitchParameter> -RemoteIPRanges <MultiValuedProperty> [-AdvertiseClientSettings <$true \| $false>] [-AuthMechanism <None \| Tls \| Integrated \| BasicAuth \| BasicAuthRequireTLS \| ExchangeServer \| ExternalAuthoritative>] [-Banner <String>] [-BinaryMimeEnabled <$true \| $false>] [-Bindings <MultiValuedProperty>] [-ChunkingEnabled <$true \| $false>] [-Comment <String>] [-Confirm [<SwitchParameter>]] [-ConnectionInactivityTimeout <EnhancedTimeSpan>] [-ConnectionTimeout <EnhancedTimeSpan>] [-DefaultDomain <AcceptedDomainIdParameter>] [-DeliveryStatusNotificationEnabled <$true \| $false>] [-DomainController <Fqdn>] [-DomainSecureEnabled <$true \| $false>] [-EightBitMimeEnabled <$true \| $false>] [-EnableAuthGSSAPI <$true \| $false>] [-Enabled <$true \| $false>] [-EnhancedStatusCodesEnabled <$true \| $false>] [-ExtendedProtectionPolicy <None \| Allow \| Require>] [-Fqdn <Fqdn>] [-LiveCredentialEnabled <$true \| $false>] [-LongAddressesEnabled <$true \| $false>] [-MaxAcknowledgementDelay <EnhancedTimeSpan>] [-MaxHeaderSize <ByteQuantifiedSize>] [-MaxHopCount <Int32>] [-MaxInboundConnection <Unlimited>] [-MaxInboundConnectionPercentagePerSource <Int32>] [-MaxInboundConnectionPerSource <Unlimited>] [-MaxLocalHopCount <Int32>] [-MaxLogonFailures <Int32>] [-MaxMessageSize <ByteQuantifiedSize>] [-MaxProtocolErrors <Unlimited>] [-MaxRecipientsPerMessage <Int32>] [-MessageRateLimit <Unlimited>] [-MessageRateSource <None \| IPAddress \| User \| All>] [-OrarEnabled <$true \| $false>] [-PermissionGroups <None \| AnonymousUsers \| ExchangeUsers \| ExchangeServers \| ExchangeLegacyServers \| Partners \| Custom>] [-PipeliningEnabled <$true \| $false>] [-ProtocolLoggingLevel <None \| Verbose>] [-RequireEHLODomain <$true \| $false>] [-RequireTLS <$true \| $false>] [-Server <ServerIdParameter>] [-SizeEnabled <Disabled \| Enabled \| EnabledWithoutValue>] [-SuppressXAnonymousTls <$true \| $false>] [-TarpitInterval <EnhancedTimeSpan>] [-TlsDomainCapabilities <MultiValuedProperty>] [-WhatIf [<SwitchParameter>]]

New-ReceiveConnector -Name <String> -Internal
<SwitchParameter> -RemoteIPRanges <MultiValuedProperty>
[-AdvertiseClientSettings <$true | $false>] [-AuthMechanism
<None | Tls | Integrated | BasicAuth | BasicAuthRequireTLS |
ExchangeServer | ExternalAuthoritative>] [-Banner
<String>] [-BinaryMimeEnabled <$true | $false>]
[-Bindings <MultiValuedProperty>] [-ChunkingEnabled <$true
| $false>] [-Comment <String>] [-Confirm
[<SwitchParameter>]] [-ConnectionInactivityTimeout
<EnhancedTimeSpan>] [-ConnectionTimeout
<EnhancedTimeSpan>] [-DefaultDomain
<AcceptedDomainIdParameter>]
[-DeliveryStatusNotificationEnabled <$true | $false>]
[-DomainController <Fqdn>] [-DomainSecureEnabled <$true |
$false>] [-EightBitMimeEnabled <$true | $false>]
[-EnableAuthGSSAPI <$true | $false>] [-Enabled <$true |
$false>] [-EnhancedStatusCodesEnabled <$true | $false>]
[-ExtendedProtectionPolicy <None | Allow | Require>] [-Fqdn
<Fqdn>] [-LiveCredentialEnabled <$true | $false>]
[-LongAddressesEnabled <$true | $false>]
[-MaxAcknowledgementDelay <EnhancedTimeSpan>] [-MaxHeaderSize
<ByteQuantifiedSize>] [-MaxHopCount <Int32>]
[-MaxInboundConnection <Unlimited>]
[-MaxInboundConnectionPercentagePerSource <Int32>]
[-MaxInboundConnectionPerSource <Unlimited>]
[-MaxLocalHopCount <Int32>] [-MaxLogonFailures <Int32>]
[-MaxMessageSize <ByteQuantifiedSize>] [-MaxProtocolErrors
<Unlimited>] [-MaxRecipientsPerMessage <Int32>]
[-MessageRateLimit <Unlimited>] [-MessageRateSource <None
| IPAddress | User | All>] [-OrarEnabled <$true | $false>]
[-PermissionGroups <None | AnonymousUsers | ExchangeUsers |
ExchangeServers | ExchangeLegacyServers | Partners | Custom>]
[-PipeliningEnabled <$true | $false>] [-ProtocolLoggingLevel
<None | Verbose>] [-RequireEHLODomain <$true | $false>]
[-RequireTLS <$true | $false>] [-Server
<ServerIdParameter>] [-SizeEnabled <Disabled | Enabled |
EnabledWithoutValue>] [-SuppressXAnonymousTls <$true |
$false>] [-TarpitInterval <EnhancedTimeSpan>]
[-TlsDomainCapabilities <MultiValuedProperty>] [-WhatIf
[<SwitchParameter>]]


New-ReceiveConnector -Name <String> -Client <SwitchParameter> -RemoteIPRanges <MultiValuedProperty> [-AdvertiseClientSettings <$true \| $false>] [-AuthMechanism <None \| Tls \| Integrated \| BasicAuth \| BasicAuthRequireTLS \| ExchangeServer \| ExternalAuthoritative>] [-Banner <String>] [-BinaryMimeEnabled <$true \| $false>] [-Bindings <MultiValuedProperty>] [-ChunkingEnabled <$true \| $false>] [-Comment <String>] [-Confirm [<SwitchParameter>]] [-ConnectionInactivityTimeout <EnhancedTimeSpan>] [-ConnectionTimeout <EnhancedTimeSpan>] [-DefaultDomain <AcceptedDomainIdParameter>] [-DeliveryStatusNotificationEnabled <$true \| $false>] [-DomainController <Fqdn>] [-DomainSecureEnabled <$true \| $false>] [-EightBitMimeEnabled <$true \| $false>] [-EnableAuthGSSAPI <$true \| $false>] [-Enabled <$true \| $false>] [-EnhancedStatusCodesEnabled <$true \| $false>] [-ExtendedProtectionPolicy <None \| Allow \| Require>] [-Fqdn <Fqdn>] [-LiveCredentialEnabled <$true \| $false>] [-LongAddressesEnabled <$true \| $false>] [-MaxAcknowledgementDelay <EnhancedTimeSpan>] [-MaxHeaderSize <ByteQuantifiedSize>] [-MaxHopCount <Int32>] [-MaxInboundConnection <Unlimited>] [-MaxInboundConnectionPercentagePerSource <Int32>] [-MaxInboundConnectionPerSource <Unlimited>] [-MaxLocalHopCount <Int32>] [-MaxLogonFailures <Int32>] [-MaxMessageSize <ByteQuantifiedSize>] [-MaxProtocolErrors <Unlimited>] [-MaxRecipientsPerMessage <Int32>] [-MessageRateLimit <Unlimited>] [-MessageRateSource <None \| IPAddress \| User \| All>] [-OrarEnabled <$true \| $false>] [-PermissionGroups <None \| AnonymousUsers \| ExchangeUsers \| ExchangeServers \| ExchangeLegacyServers \| Partners \| Custom>] [-PipeliningEnabled <$true \| $false>] [-ProtocolLoggingLevel <None \| Verbose>] [-RequireEHLODomain <$true \| $false>] [-RequireTLS <$true \| $false>] [-Server <ServerIdParameter>] [-SizeEnabled <Disabled \| Enabled \| EnabledWithoutValue>] [-SuppressXAnonymousTls <$true \| $false>] [-TarpitInterval <EnhancedTimeSpan>] [-TlsDomainCapabilities <MultiValuedProperty>] [-WhatIf [<SwitchParameter>]]

New-ReceiveConnector -Name <String> -Client
<SwitchParameter> -RemoteIPRanges <MultiValuedProperty>
[-AdvertiseClientSettings <$true | $false>] [-AuthMechanism
<None | Tls | Integrated | BasicAuth | BasicAuthRequireTLS |
ExchangeServer | ExternalAuthoritative>] [-Banner
<String>] [-BinaryMimeEnabled <$true | $false>]
[-Bindings <MultiValuedProperty>] [-ChunkingEnabled <$true
| $false>] [-Comment <String>] [-Confirm
[<SwitchParameter>]] [-ConnectionInactivityTimeout
<EnhancedTimeSpan>] [-ConnectionTimeout
<EnhancedTimeSpan>] [-DefaultDomain
<AcceptedDomainIdParameter>]
[-DeliveryStatusNotificationEnabled <$true | $false>]
[-DomainController <Fqdn>] [-DomainSecureEnabled <$true |
$false>] [-EightBitMimeEnabled <$true | $false>]
[-EnableAuthGSSAPI <$true | $false>] [-Enabled <$true |
$false>] [-EnhancedStatusCodesEnabled <$true | $false>]
[-ExtendedProtectionPolicy <None | Allow | Require>] [-Fqdn
<Fqdn>] [-LiveCredentialEnabled <$true | $false>]
[-LongAddressesEnabled <$true | $false>]
[-MaxAcknowledgementDelay <EnhancedTimeSpan>] [-MaxHeaderSize
<ByteQuantifiedSize>] [-MaxHopCount <Int32>]
[-MaxInboundConnection <Unlimited>]
[-MaxInboundConnectionPercentagePerSource <Int32>]
[-MaxInboundConnectionPerSource <Unlimited>]
[-MaxLocalHopCount <Int32>] [-MaxLogonFailures <Int32>]
[-MaxMessageSize <ByteQuantifiedSize>] [-MaxProtocolErrors
<Unlimited>] [-MaxRecipientsPerMessage <Int32>]
[-MessageRateLimit <Unlimited>] [-MessageRateSource <None
| IPAddress | User | All>] [-OrarEnabled <$true | $false>]
[-PermissionGroups <None | AnonymousUsers | ExchangeUsers |
ExchangeServers | ExchangeLegacyServers | Partners | Custom>]
[-PipeliningEnabled <$true | $false>] [-ProtocolLoggingLevel
<None | Verbose>] [-RequireEHLODomain <$true | $false>]
[-RequireTLS <$true | $false>] [-Server
<ServerIdParameter>] [-SizeEnabled <Disabled | Enabled |
EnabledWithoutValue>] [-SuppressXAnonymousTls <$true |
$false>] [-TarpitInterval <EnhancedTimeSpan>]
[-TlsDomainCapabilities <MultiValuedProperty>] [-WhatIf
[<SwitchParameter>]]


New-ReceiveConnector -Name <String> -Bindings <MultiValuedProperty> -Partner <SwitchParameter> -RemoteIPRanges <MultiValuedProperty> [-AdvertiseClientSettings <$true \| $false>] [-AuthMechanism <None \| Tls \| Integrated \| BasicAuth \| BasicAuthRequireTLS \| ExchangeServer \| ExternalAuthoritative>] [-Banner <String>] [-BinaryMimeEnabled <$true \| $false>] [-ChunkingEnabled <$true \| $false>] [-Comment <String>] [-Confirm [<SwitchParameter>]] [-ConnectionInactivityTimeout <EnhancedTimeSpan>] [-ConnectionTimeout <EnhancedTimeSpan>] [-DefaultDomain <AcceptedDomainIdParameter>] [-DeliveryStatusNotificationEnabled <$true \| $false>] [-DomainController <Fqdn>] [-DomainSecureEnabled <$true \| $false>] [-EightBitMimeEnabled <$true \| $false>] [-EnableAuthGSSAPI <$true \| $false>] [-Enabled <$true \| $false>] [-EnhancedStatusCodesEnabled <$true \| $false>] [-ExtendedProtectionPolicy <None \| Allow \| Require>] [-Fqdn <Fqdn>] [-LiveCredentialEnabled <$true \| $false>] [-LongAddressesEnabled <$true \| $false>] [-MaxAcknowledgementDelay <EnhancedTimeSpan>] [-MaxHeaderSize <ByteQuantifiedSize>] [-MaxHopCount <Int32>] [-MaxInboundConnection <Unlimited>] [-MaxInboundConnectionPercentagePerSource <Int32>] [-MaxInboundConnectionPerSource <Unlimited>] [-MaxLocalHopCount <Int32>] [-MaxLogonFailures <Int32>] [-MaxMessageSize <ByteQuantifiedSize>] [-MaxProtocolErrors <Unlimited>] [-MaxRecipientsPerMessage <Int32>] [-MessageRateLimit <Unlimited>] [-MessageRateSource <None \| IPAddress \| User \| All>] [-OrarEnabled <$true \| $false>] [-PermissionGroups <None \| AnonymousUsers \| ExchangeUsers \| ExchangeServers \| ExchangeLegacyServers \| Partners \| Custom>] [-PipeliningEnabled <$true \| $false>] [-ProtocolLoggingLevel <None \| Verbose>] [-RequireEHLODomain <$true \| $false>] [-RequireTLS <$true \| $false>] [-Server <ServerIdParameter>] [-SizeEnabled <Disabled \| Enabled \| EnabledWithoutValue>] [-SuppressXAnonymousTls <$true \| $false>] [-TarpitInterval <EnhancedTimeSpan>] [-TlsDomainCapabilities <MultiValuedProperty>] [-WhatIf [<SwitchParameter>]]

New-ReceiveConnector -Name <String> -Bindings
<MultiValuedProperty> -Partner <SwitchParameter>
-RemoteIPRanges <MultiValuedProperty>
[-AdvertiseClientSettings <$true | $false>] [-AuthMechanism
<None | Tls | Integrated | BasicAuth | BasicAuthRequireTLS |
ExchangeServer | ExternalAuthoritative>] [-Banner
<String>] [-BinaryMimeEnabled <$true | $false>]
[-ChunkingEnabled <$true | $false>] [-Comment <String>]
[-Confirm [<SwitchParameter>]] [-ConnectionInactivityTimeout
<EnhancedTimeSpan>] [-ConnectionTimeout
<EnhancedTimeSpan>] [-DefaultDomain
<AcceptedDomainIdParameter>]
[-DeliveryStatusNotificationEnabled <$true | $false>]
[-DomainController <Fqdn>] [-DomainSecureEnabled <$true |
$false>] [-EightBitMimeEnabled <$true | $false>]
[-EnableAuthGSSAPI <$true | $false>] [-Enabled <$true |
$false>] [-EnhancedStatusCodesEnabled <$true | $false>]
[-ExtendedProtectionPolicy <None | Allow | Require>] [-Fqdn
<Fqdn>] [-LiveCredentialEnabled <$true | $false>]
[-LongAddressesEnabled <$true | $false>]
[-MaxAcknowledgementDelay <EnhancedTimeSpan>] [-MaxHeaderSize
<ByteQuantifiedSize>] [-MaxHopCount <Int32>]
[-MaxInboundConnection <Unlimited>]
[-MaxInboundConnectionPercentagePerSource <Int32>]
[-MaxInboundConnectionPerSource <Unlimited>]
[-MaxLocalHopCount <Int32>] [-MaxLogonFailures <Int32>]
[-MaxMessageSize <ByteQuantifiedSize>] [-MaxProtocolErrors
<Unlimited>] [-MaxRecipientsPerMessage <Int32>]
[-MessageRateLimit <Unlimited>] [-MessageRateSource <None
| IPAddress | User | All>] [-OrarEnabled <$true | $false>]
[-PermissionGroups <None | AnonymousUsers | ExchangeUsers |
ExchangeServers | ExchangeLegacyServers | Partners | Custom>]
[-PipeliningEnabled <$true | $false>] [-ProtocolLoggingLevel
<None | Verbose>] [-RequireEHLODomain <$true | $false>]
[-RequireTLS <$true | $false>] [-Server
<ServerIdParameter>] [-SizeEnabled <Disabled | Enabled |
EnabledWithoutValue>] [-SuppressXAnonymousTls <$true |
$false>] [-TarpitInterval <EnhancedTimeSpan>]
[-TlsDomainCapabilities <MultiValuedProperty>] [-WhatIf
[<SwitchParameter>]]


New-ReceiveConnector -Name <String> -Usage <Custom \| Internet \| Internal \| Client \| Partner> [-AdvertiseClientSettings <$true \| $false>] [-AuthMechanism <None \| Tls \| Integrated \| BasicAuth \| BasicAuthRequireTLS \| ExchangeServer \| ExternalAuthoritative>] [-Banner <String>] [-BinaryMimeEnabled <$true \| $false>] [-Bindings <MultiValuedProperty>] [-ChunkingEnabled <$true \| $false>] [-Comment <String>] [-Confirm [<SwitchParameter>]] [-ConnectionInactivityTimeout <EnhancedTimeSpan>] [-ConnectionTimeout <EnhancedTimeSpan>] [-DefaultDomain <AcceptedDomainIdParameter>] [-DeliveryStatusNotificationEnabled <$true \| $false>] [-DomainController <Fqdn>] [-DomainSecureEnabled <$true \| $false>] [-EightBitMimeEnabled <$true \| $false>] [-EnableAuthGSSAPI <$true \| $false>] [-Enabled <$true \| $false>] [-EnhancedStatusCodesEnabled <$true \| $false>] [-ExtendedProtectionPolicy <None \| Allow \| Require>] [-Fqdn <Fqdn>] [-LiveCredentialEnabled <$true \| $false>] [-LongAddressesEnabled <$true \| $false>] [-MaxAcknowledgementDelay <EnhancedTimeSpan>] [-MaxHeaderSize <ByteQuantifiedSize>] [-MaxHopCount <Int32>] [-MaxInboundConnection <Unlimited>] [-MaxInboundConnectionPercentagePerSource <Int32>] [-MaxInboundConnectionPerSource <Unlimited>] [-MaxLocalHopCount <Int32>] [-MaxLogonFailures <Int32>] [-MaxMessageSize <ByteQuantifiedSize>] [-MaxProtocolErrors <Unlimited>] [-MaxRecipientsPerMessage <Int32>] [-MessageRateLimit <Unlimited>] [-MessageRateSource <None \| IPAddress \| User \| All>] [-OrarEnabled <$true \| $false>] [-PermissionGroups <None \| AnonymousUsers \| ExchangeUsers \| ExchangeServers \| ExchangeLegacyServers \| Partners \| Custom>] [-PipeliningEnabled <$true \| $false>] [-ProtocolLoggingLevel <None \| Verbose>] [-RemoteIPRanges <MultiValuedProperty>] [-RequireEHLODomain <$true \| $false>] [-RequireTLS <$true \| $false>] [-Server <ServerIdParameter>] [-SizeEnabled <Disabled \| Enabled \| EnabledWithoutValue>] [-SuppressXAnonymousTls <$true \| $false>] [-TarpitInterval <EnhancedTimeSpan>] [-TlsDomainCapabilities <MultiValuedProperty>] [-WhatIf [<SwitchParameter>]]

New-ReceiveConnector -Name <String> -Usage
<Custom | Internet | Internal | Client | Partner>
[-AdvertiseClientSettings <$true | $false>] [-AuthMechanism
<None | Tls | Integrated | BasicAuth | BasicAuthRequireTLS |
ExchangeServer | ExternalAuthoritative>] [-Banner
<String>] [-BinaryMimeEnabled <$true | $false>]
[-Bindings <MultiValuedProperty>] [-ChunkingEnabled <$true
| $false>] [-Comment <String>] [-Confirm
[<SwitchParameter>]] [-ConnectionInactivityTimeout
<EnhancedTimeSpan>] [-ConnectionTimeout
<EnhancedTimeSpan>] [-DefaultDomain
<AcceptedDomainIdParameter>]
[-DeliveryStatusNotificationEnabled <$true | $false>]
[-DomainController <Fqdn>] [-DomainSecureEnabled <$true |
$false>] [-EightBitMimeEnabled <$true | $false>]
[-EnableAuthGSSAPI <$true | $false>] [-Enabled <$true |
$false>] [-EnhancedStatusCodesEnabled <$true | $false>]
[-ExtendedProtectionPolicy <None | Allow | Require>] [-Fqdn
<Fqdn>] [-LiveCredentialEnabled <$true | $false>]
[-LongAddressesEnabled <$true | $false>]
[-MaxAcknowledgementDelay <EnhancedTimeSpan>] [-MaxHeaderSize
<ByteQuantifiedSize>] [-MaxHopCount <Int32>]
[-MaxInboundConnection <Unlimited>]
[-MaxInboundConnectionPercentagePerSource <Int32>]
[-MaxInboundConnectionPerSource <Unlimited>]
[-MaxLocalHopCount <Int32>] [-MaxLogonFailures <Int32>]
[-MaxMessageSize <ByteQuantifiedSize>] [-MaxProtocolErrors
<Unlimited>] [-MaxRecipientsPerMessage <Int32>]
[-MessageRateLimit <Unlimited>] [-MessageRateSource <None
| IPAddress | User | All>] [-OrarEnabled <$true | $false>]
[-PermissionGroups <None | AnonymousUsers | ExchangeUsers |
ExchangeServers | ExchangeLegacyServers | Partners | Custom>]
[-PipeliningEnabled <$true | $false>] [-ProtocolLoggingLevel
<None | Verbose>] [-RemoteIPRanges
<MultiValuedProperty>] [-RequireEHLODomain <$true |
$false>] [-RequireTLS <$true | $false>] [-Server
<ServerIdParameter>] [-SizeEnabled <Disabled | Enabled |
EnabledWithoutValue>] [-SuppressXAnonymousTls <$true |
$false>] [-TarpitInterval <EnhancedTimeSpan>]
[-TlsDomainCapabilities <MultiValuedProperty>] [-WhatIf
[<SwitchParameter>]]

Detailed Description

You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Receive connectors" entry in the Transport Permissions topic.

Parameters

Parameter Required Type Description

Name

Required

System.String

The Name parameter specifies the administrator-supplied name of the connector. Enter the Name parameter as a string, for example: "New Receive Connector".

Bindings

Required

Microsoft.Exchange.Data.MultiValuedProperty

The Bindings parameter specifies the local IP address and TCP port numbers used by the Receive connector to listen for inbound messages. Valid syntax for this parameter is <IP Address>:<TCP Port>, such as 192.168.1.1:25. The IP address 0.0.0.0 indicates that the Receive connector uses all IP addresses configured on all network adapters to listen for inbound messages.

Note:
You must specify a local IP address that's valid for the Hub Transport server or Edge Transport server on which the Receive connector is located. If you specify an invalid local IP address, the Microsoft Exchange Transport service may fail to start when the service is restarted. To specify all IP addresses configured on all network adapters, you can use the IP address `0.0.0.0`.

You must specify a value for the Bindings parameter when the following parameters are specified:

Internet or Usage parameter with a value of Internet
Partner or Usage parameter with a value of Partner
Custom or Usage parameter with a value of Custom

The values that you specify by using the Bindings parameter must satisfy one of the following requirements for uniqueness:

You can specify a unique combination of IP address and TCP port that doesn't conflict with the IP address or TCP port used in the Bindings parameter of another Receive connector on the server.
You can use an existing combination of IP address and TCP port, but use the RemoteIPRanges parameter to restrict the remote servers serviced by the Receive connector. However, when you use this command to create a Receive connector, you can only use the RemoteIPRanges parameter and the Bindings parameter together when the following parameters are specified: Custom or Usage parameter with a value of Custom. Partner or Usage parameter with a value of Partner.

You can't specify a value for the Bindings parameter with this command when the following parameters are specified:

Client or Usage parameter with a value of Client. The default value of the Bindings parameter is 0.0.0.0:587. This value indicates that the connector accepts connections on TCP port 587 on all IP addresses configured on all network adapters in the server.
Internal or Usage parameter with a value of Internal. The default value of the Bindings parameter is 0.0.0.0:25. This value indicates that the connector accepts connections on TCP port 25 on all IP addresses configured on all network adapters in the server.

Client

Required

System.Management.Automation.SwitchParameter

The Client parameter can be used to specify the Client usage type. The usage type specifies the default permission groups and authentication methods assigned to the Receive connector. If you use the Client parameter, you can't use any of the following parameters:

Internal
Internet
Partner
Custom
Usage

If you specify the Client parameter, you must specify a value for the RemoteIPRanges parameter. If you don't specify a value for a required parameter, this command prompts you so that it may continue.

For more information about Receive connector usage types, permission groups, and authentication methods, see Understanding Receive Connectors.

Internal

Required

System.Management.Automation.SwitchParameter

The Internal parameter specifies the Internal usage type. The usage type specifies the default permission groups and authentication methods assigned to the Receive connector. If you use the Internal parameter, you can't use any of the following parameters:

Client
Internet
Partner
Custom
Usage

If you specify the Internal parameter, you must specify a value for the RemoteIPRanges parameter. If you don't specify a value for a required parameter, the command prompts you so that it may continue.

For more information about Receive connector usage types, permission groups, and authentication methods, see Understanding Receive Connectors.

Internet

Required

System.Management.Automation.SwitchParameter

The Internet parameter specifies the Internet usage type. The usage type specifies the default permission groups and authentication methods assigned to the Receive connector. If you use the Internet parameter, you can't use any of the following parameters:

Client
Internal
Partner
Custom
Usage

If you specify the Internet parameter, you must specify a value for the Bindings parameter. If you don't provide a value for a required parameter, this command prompts you so that it may continue.

For more information about Receive connector usage types, permission groups, and authentication methods, see Understanding Receive Connectors.

Partner

Required

System.Management.Automation.SwitchParameter

The Partner parameter specifies the Partner usage type. The usage type specifies the default permission groups and authentication methods assigned to the Receive connector. If you use the Partner parameter, you can't use any of the following parameters:

Client
Internal
Internet
Custom
Usage

If you specify the Partner parameter, you must specify a value for the following parameters:

Bindings
RemoteIPRanges

If you don't provide a value for a required parameter, this command prompts you so that it may continue.

RemoteIPRanges

Required

Microsoft.Exchange.Data.MultiValuedProperty

The RemoteIPRanges parameter specifies the remote IP addresses from which this connector accepts messages. Valid syntax for this parameter is <Starting IP Address>-<Ending IP Address>, such as 192.168.1.1-192.168.1.10. You can specify multiple IP address ranges separated by commas.

You must specify a value for the RemoteIPRanges parameter when the following parameters are specified:

Client or Usage parameter with a value of Client
Internal or Usage parameter with a value of Internal
Partner or Usage parameter with a value of Partner
Custom or Usage parameter with a value of Custom

Multiple Receive connectors on the same server can have overlapping remote IP address ranges as long as one IP address range is completely overlapped by another IP address. When remote IP address ranges overlap, the remote IP address range with the most specific match to the IP address of the connecting server is used.

The default value of the RemoteIPRanges parameter for the Internet usage type is 0.0.0.0-255.255.255.255. This value indicates that the connector accepts connections from all remote IP addresses.

Usage

Required

Microsoft.Exchange.Management.SystemConfigurationTasks.NewReceiveConnector+UsageType

The Usage parameter specifies the default permission groups and authentication methods assigned to the Receive connector. The valid values for the Usage parameter are as follows: Client, Custom, Internal, Internet, and Partner.

If you specify a value for the Usage parameter, you can't use any of the following parameters:

Client
Internal
Internet
Partner
Custom

A value for the Bindings parameter is required if you specify any of the following values for the Usage parameter:

Internet
Partner
Custom

A value for the RemoteIPRanges parameter is required if you specify any of the following values for the Usage parameter:

Client
Internal
Partner
Custom

If you don't specify a value for a required parameter, the command ends unsuccessfully. This command won't prompt you for the missing required parameters.

For more information about Receive connector usage types, permission groups, and authentication methods, see Understanding Receive Connectors.

AdvertiseClientSettings

Optional

System.Boolean

The AdvertiseClientSettings parameter specifies whether the SMTP server name, port number, and authentication settings are displayed in the Outlook Web App About page, accessed from the Help menu.

The default value is $true.

AuthMechanism

Optional

Microsoft.Exchange.Data.Directory.SystemConfiguration.ReceiveConnector+AuthMechanisms

The AuthMechanism parameter specifies the advertised and accepted authentication mechanisms. The authentication options are None, Tls, Integrated, BasicAuth, BasicAuthRequireTLS, ExchangeServer, and ExternalAuthoritative. You can enter multiple values for the AuthMechanism parameter by separating the values with commas. If the RequireTLS parameter is set to $true, the AuthMechanism parameter must be set to Tls. If you set the AuthMechanism parameter to BasicAuthRequireTLS, you must also select BasicAuth and Tls. The AuthMechanism parameter value ExternalAuthoritative may only coexist with the value Tls. If you set the AuthMechanism parameter to ExternalAuthoritative, the PermissionGroups parameter must also have the value ExchangeServers.

Banner

Optional

System.String

The Banner parameter specifies an SMTP 220 banner and overrides the default SMTP 220 banner. When the value of the Banner parameter is blank, the default SMTP banner is the following:

220 <Servername> Microsoft ESMTP MAIL service ready at <RegionalDay-Date-24HourTimeFormat> <RegionalTimeZoneOffset>

When you specify a value for the Banner parameter, you must use the following syntax:

220 <RemainingBannerText>.

220 is the default Service ready SMTP response code as defined in RFC 2821.

BinaryMimeEnabled

Optional

System.Boolean

The BinaryMimeEnabled parameter specifies whether the BINARYMIME EHLO keyword is advertised in the EHLO response to the remote server and is available for use. Valid values for this parameter are $true or $false. The default value is $true. When the BinaryMimeEnabled parameter is set to $true, the BINARYMIME EHLO keyword is advertised in the EHLO response to the remote server and is available for use. When the BinaryMimeEnabled parameter is set to $false, the BINARYMIME EHLO keyword isn't advertised in the EHLO response to the remote server and is disabled.

ChunkingEnabled

Optional

System.Boolean

The ChunkingEnabled parameter specifies whether the CHUNKING EHLO keyword is advertised in the EHLO response to the remote server and is available for use. Valid input for this parameter is $true or $false. The default value is $true. When the ChunkingEnabled parameter is set to $true, the CHUNKING EHLO keyword is advertised in the EHLO response to the remote server and is available for use. When the ChunkingEnabled parameter is set to $false, the CHUNKING EHLO keyword isn't advertised in the EHLO response to the remote server and is disabled.

Comment

Optional

System.String

The Comment parameter specifies an optional comment. You must encapsulate the Comment parameter in quotation marks ("), for example: "this is an admin note".

Confirm

Optional

System.Management.Automation.SwitchParameter

The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.

ConnectionInactivityTimeout

Optional

Microsoft.Exchange.Data.EnhancedTimeSpan

The ConnectionInactivityTimeout parameter specifies the maximum amount of idle time before a connection to a Receive connector is closed. The default value for a Receive connector configured on a Hub Transport server is 5 minutes. The default value for a Receive connector configured on an Edge Transport server is 1 minute. To specify a value, enter the value as a time span: dd.hh:mm:ss, where d = days, h = hours, m = minutes, and s = seconds. The value specified by the ConnectionTimeout parameter must be greater than the value specified by the ConnectionInactivityTimeout parameter. The valid input range for either parameter is 00:00:01 to 1.00:00:00.

ConnectionTimeout

Optional

Microsoft.Exchange.Data.EnhancedTimeSpan

The ConnectionTimeout parameter specifies the maximum time that a connection can remain open, even if the connection is actively transmitting data. The default value for a Receive connector configured on a Hub Transport server is 10 minutes The default value for a Receive connector configured on an Edge Transport server is 5 minutes.

To specify a value, enter it as a time span: dd.hh:mm:ss where d = days, h = hours, m = minutes, and s = seconds.

For example, to specify a connection time-out of 5 minutes, enter 00.00:05:00.

The value specified by the ConnectionTimeout parameter must be greater than the value specified by the ConnectionInactivityTimeout parameter. The valid input range for either parameter is from 00:00:01 through 1.00:00:00.

Custom

Optional

System.Management.Automation.SwitchParameter

The Custom parameter specifies the Custom usage type. The usage type specifies the default permission groups and authentication methods assigned to the Receive connector. If you use the Custom parameter, you can't use any of the following parameters:

Client
Internal
Internet
Partner
Usage

If you specify the Custom parameter, you must specify a value for the following parameters:

Bindings
RemoteIPRanges

If you don't provide a value for a required parameter, this command prompts you so that it may continue.

DefaultDomain

Optional

Microsoft.Exchange.Configuration.Tasks.AcceptedDomainIdParameter

The DefaultDomain parameter specifies the domain name to append to values that are submitted to MAIL FROM or RCPT TO in the message envelope by a sending server if no domain name is provided.

DeliveryStatusNotificationEnabled

Optional

System.Boolean

The DeliveryStatusNotificationEnabled parameter specifies whether the delivery status notification (DSN) EHLO keyword is advertised in the EHLO response to the remote server and is available for use. Valid values for this parameter are $true or $false. The default value is $true. When the DeliveryStatusNotificationEnabled parameter is set to $true, the DSN EHLO keyword is advertised in the EHLO response to the remote server and is available for use. When the DeliveryStatusNotificationEnabled parameter is set to $false, the DSN EHLO keyword isn't advertised in the EHLO response to the remote server and is disabled. The DSN extension to extended SMTP (ESMTP) provides enhanced DSN functionality specified in RFC 1891.

DomainController

Optional

Microsoft.Exchange.Data.Fqdn

The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory. The DomainController parameter isn't supported on the Edge Transport server role. The Edge Transport server role writes only to the Active Directory Lightweight Directory Services (AD LDS) instance.

DomainSecureEnabled

Optional

System.Boolean

The DomainSecureEnabled parameter specifies the first part of the process to enable mutual Transport Layer Security (TLS) authentication for the domains serviced by this Receive connector. Mutual TLS authentication functions correctly only if the following conditions are true:

The value of the DomainSecureEnabled parameter is $true.
The AuthMechanism parameter contains the value Tls and doesn't contain the value ExternalAuthoritative.
The value of the AuthMechanism parameter contains Tls.
The TLSReceiveDomainSecureList parameter in the Get-TransportConfig command contains at least one domain serviced by this Receive connector. The wildcard character (*) isn't supported in domains that are configured for mutual TLS authentication. The same domain must also be defined on the corresponding Send connector, and in the value of the TLSSendDomainSecureList parameter in the Get-TransportConfig command.

The default value for the DomainSecureEnabled parameter is $false for the following types of Receive connectors:

All Receive connectors defined on a Hub Transport server
User-created Receive connectors defined on an Edge Transport server

The default value for the DomainSecureEnabled parameter is $true for default Receive connectors defined on an Edge Transport server.

EightBitMimeEnabled

Optional

System.Boolean

The EightBitMimeEnabled parameter specifies whether the 8BITMIME EHLO keyword is advertised in the EHLO response to the remote server and is available for use. Valid values for this parameter are $true or $false. The default value is $true. When the EightBitMimeEnabled parameter is set to $true, the 8BITMIME EHLO keyword is advertised in the EHLO response to the remote server and is available for use. When the EightBitMimeEnabled parameter is set to $false, the 8BITMIME EHLO keyword isn't advertised in the EHLO response to the remote server and is disabled.

EnableAuthGSSAPI

Optional

System.Boolean

The EnableAuthGSSAPI parameter specifies the advertisement of the Generic Security Services application programming interface (GSSAPI) authentication method when Integrated Windows authentication is enabled on this connector. If the AuthMechanism parameter contains Integrated, and the EnableAuthGSSAPI parameter is set to $true, the AUTH GSSAPI NTLM keyword is advertised in the EHLO response of the Receive connector. Clients may use Kerberos or NTLM to authenticate with the Receive connector. If the AuthMechanism parameter contains Integrated, and the EnableAuthGSSAPI parameter is set to $false, the AUTH NTLM keyword is advertised in the EHLO response of the Receive connector. Clients may only use NTLM to authenticate with the Receive connector.

If you have Internet Information Services (IIS) messaging servers that authenticate with this Receive connector, you should set the value of the EnableAuthGSSAPI parameter to $false. Authentication with computers running Microsoft Exchange Server 2003 aren't affected by the value of the EnableAuthGSSAPI parameter. Exchange 2003 servers use the authentication methods advertised in the X-EXPS keyword. The X-EXPS keyword is advertised in the EHLO response of the Receive connector when the AuthMechanism parameter contains ExchangeServer.

The valid values for this parameter is $true or $false. The default value is $false. By default, the EnableAuthGSSAPI parameter is set to $true only on the default Receive connector Client <Server Name> created only on Hub Transport servers.

Enabled

Optional

System.Boolean

The Enabled parameter specifies whether to enable the connector. Valid values for this parameter are $true or $false. The default value is $true. Use the Enabled parameter to enable or disable the connector.

EnhancedStatusCodesEnabled

Optional

System.Boolean

The EnhancedStatusCodesEnabled parameter specifies whether the ENHANCEDSTATUSCODES EHLO keyword is advertised in the EHLO response to the remote server and is available for use. Valid values for this parameter are $true or $false. The default value is $true. When the EnhancedStatusCodesEnabled parameter is set to $true, the ENHANCEDSTATUSCODES EHLO keyword is advertised in the EHLO response to the remote server and is available for use. When the EnhancedStatusCodesEnabled parameter is set to $false, the ENHANCEDSTATUSCODES EHLO keyword isn't advertised in the EHLO response to the remote server and is disabled. The ENHANCEDSTATUSCODES extension provides enhanced error and status information in DSNs sent to remote servers.

ExtendedProtectionPolicy

Optional

Microsoft.Exchange.Data.Directory.SystemConfiguration.ReceiveConnector+ExtendedProtectionPolicySetting

The ExtendedProtectionPolicy parameter specifies how you want to use Extended Protection for Authentication on this Receive connector. By default, this parameter is set to None. The ExtendedProtectionPolicy parameter may have the following values:

None Extended Protection for Authentication won't be used.
Allow Extended Protection for Authentication will be used only if the connecting host supports it. Otherwise, the connections will be established without Extended Protection for Authentication.
Require Extended Protection for Authentication will be required for all incoming connections to this Receive connector. If the connecting host doesn't support Extended Protection for Authentication, the connection will be rejected.

Extended Protection for Authentication enhances the protection and handling of credentials when authenticating network connections using Integrated Windows authentication. Integrated Windows authentication is also known as NTLM. We strongly recommend that you use Extended Protection for Authentication if you're using Integrated Windows authentication.

Fqdn

Optional

Microsoft.Exchange.Data.Fqdn

The Fqdn parameter specifies the FQDN used as the destination server for connected messaging servers that use the Receive connector to send incoming messages. The value of this parameter is displayed to connected messaging servers whenever a destination server name is required, as in the following examples:

In the default SMTP banner of the Receive connector
In the EHLO/HELO response of the Receive connector
In the most recent Received header field in the incoming message when the message enters the Hub Transport server or Edge Transport server
During TLS authentication

The default value of the Fqdn parameter is the FQDN of the Hub Transport server or Edge Transport server that contains the Receive connector.

Note:
Don't modify the FQDN value on the default Receive connector Default <Server Name> that's automatically created on Hub Transport servers. If you have multiple Hub Transport servers in your Exchange organization and you change the FQDN value on the Default <Server Name> Receive connector, internal mail flow between Hub Transport servers will fail.

LiveCredentialEnabled

Optional

System.Boolean

The LiveCredentialEnabled parameter is reserved for internal Microsoft use.

LongAddressesEnabled

Optional

System.Boolean

The LongAddressesEnabled parameter specifies whether to enable the Receive connector to accept long X.400 e-mail addresses. The X.400 e-mail addresses are encapsulated in SMTP e-mail addresses by using the Internet Mail Connector Encapsulated Address (IMCEA) encapsulation method.

When the value of this parameter is $false, the maximum length for a complete SMTP e-mail address is 571 characters.

When the value of this parameter is $true, the following changes are made:

The XLONGADDR keyword is advertised in the EHLO response of the Receive connector.
The accepted line length of an SMTP session is increased to 8,000 characters.
Valid long addresses are accepted by the MAIL FROM and RCPT TO SMTP commands.

Therefore, X.400 e-mail addresses can be up to 1,860 characters long after IMCEA encapsulation.

The valid values for this parameter are $true or $false. The default value is $false. You can only modify this parameter on Receive connectors configured on Hub Transport servers.

MaxAcknowledgementDelay

Optional

Microsoft.Exchange.Data.EnhancedTimeSpan

The MaxAcknowledgementDelay parameter specifies the maximum period the transport server delays acknowledgement until it verifies that the message has been successfully delivered to all recipients. When receiving messages from a host that doesn't support shadow redundancy, an Exchange Server 2010 transport server will delay issuing an acknowledgement until it verifies that the message has been successfully delivered to all recipients. However, if it takes too long to verify successful delivery, the transport server will time out and issue an acknowledgement anyway.

The default value is 30 seconds.

MaxHeaderSize

Optional

Microsoft.Exchange.Data.ByteQuantifiedSize

The MaxHeaderSize parameter specifies in bytes the maximum size of the SMTP message header that the Receive connector accepts before it closes the connection. The default value is 65536 bytes. When you enter a value, qualify the value with one of the following units:

B (bytes)
KB (kilobytes)
MB (megabytes)
GB (gigabytes)

Unqualified values are treated as bytes. The valid input range for this parameter is from 1 through 2147483647 bytes.

MaxHopCount

Optional

System.Int32

The MaxHopCount parameter specifies the maximum number of hops that a message can take before the message is rejected by the Receive connector. The maximum number of hops is determined by the number of Received header fields that exist in a submitted message. The default value is 30. The valid input range for this parameter is from 1 through 500.

MaxInboundConnection

Optional

Microsoft.Exchange.Data.Unlimited

The MaxInboundConnection parameter specifies the maximum number of inbound connections that this Receive connector serves at the same time. The default value is 5000. The valid input range for this parameter is from 1 through 2147483647. To disable the inbound connection limit on a Receive connector, enter a value of unlimited.

MaxInboundConnectionPercentagePerSource

Optional

System.Int32

The MaxInboundConnectionPercentagePerSource parameter specifies the maximum number of connections that a Receive connector serves at the same time from a single IP address, expressed as the percentage of available remaining connections on a Receive connector. Enter the value as an integer without the percent sign (%). The default value is 2 percent. The valid input range for this parameter is from 1 through 100.

MaxInboundConnectionPerSource

Optional

Microsoft.Exchange.Data.Unlimited

The MaxInboundConnectionPerSource parameter specifies the maximum number of connections that this Receive connector serves at the same time from a single IP address. The default value is 100. The valid input range for this parameter is from 1 through 10000. To disable the inbound connection per source limit on a Receive connector, enter a value of unlimited.

MaxLocalHopCount

Optional

System.Int32

The MaxLocalHopCount parameter specifies the maximum number of local hops that a message can take before the message is rejected by the Receive connector. The maximum number of local hops is determined by the number of Received headers with local server addresses in a submitted message. The default value is 8. The valid input range for this parameter is from 0 through 50. When you specify a value of 0, the message is never rejected based on the number of local hops.

MaxLogonFailures

Optional

System.Int32

The MaxLogonFailures parameter specifies the number of logon failures that the Receive connector retries before it closes the connection. The default value is 3. The valid input range for this parameter is from 0 through 10. When you specify a value of 0, the connection is never closed because of logon failures.

MaxMessageSize

Optional

Microsoft.Exchange.Data.ByteQuantifiedSize

The MaxMessageSize parameter specifies the maximum size of a message. The default value is 10 MB. When you enter a value, qualify the value with one of the following units:

B (bytes)
KB (kilobytes)
MB (megabytes)
GB (gigabytes)

Unqualified values are treated as bytes. The valid input range for this parameter is from 65536 through 2147483647 bytes.

MaxProtocolErrors

Optional

Microsoft.Exchange.Data.Unlimited

The MaxProtocolErrors parameter specifies the maximum number of SMTP protocol errors that the Receive connector accepts before closing the connection. The default value is 5. The valid input range for this parameter is from 0 through 2147483647. When you specify a value of unlimited, a connection is never closed because of protocol errors.

MaxRecipientsPerMessage

Optional

System.Int32

The MaxRecipientsPerMessage parameter specifies the maximum number of recipients per message that the Receive connector accepts before closing the connection. The default value is 200. The valid input range for this parameter is from 1 through 512000.

MessageRateLimit

Optional

Microsoft.Exchange.Data.Unlimited

The MessageRateLimit parameter specifies the maximum number of messages that can be sent by a single client IP address per minute. The default value for a Receive connector configured on a Hub Transport server is unlimited. The default value for a Receive connector configured on an Edge Transport server is 600 messages per minute. The valid input range for this parameter is from 1 through 2147483647. To remove the message rate limit on a Receive connector, enter a value of unlimited.

MessageRateSource

Optional

Microsoft.Exchange.Data.Directory.SystemConfiguration.MessageRateSourceFlags

The MessageRateSource parameter specifies how the message submission rate is calculated. It can have one of the following values:

None The message submission rate isn't calculated.
User The message submission rate is calculated for sending users (specified with the MAIL FROM SMTP command).
IPAddress The message submission rate is calculated for sending hosts.
All The message submission rate is calculated for both sending users and sending hosts.

OrarEnabled

Optional

System.Boolean

The OrarEnabled parameter enables the Originator Requested Alternate Recipient (ORAR). When the value of this parameter is $false, ORAR isn't supported. When the value of this parameter is $true, ORAR is supported by advertising the XORAR keyword in the EHLO response of the Receive connector. The actual ORAR information is transmitted in the RCPT TO SMTP command.

The valid values for this parameter are $true or $false. The default value is $false. If the e-mail address specified in the ORAR information is a long X.400 e-mail address, the LongAddressesEnabled parameter must be $true.

PermissionGroups

Optional

Microsoft.Exchange.Data.PermissionGroups

The PermissionGroups parameter specifies the groups or roles that can submit messages to the Receive connector and the permissions assigned to those groups. A permission group is a predefined set of permissions granted to well-known security principals. The valid values for this parameter are as follows: None, AnonymousUsers, ExchangeUsers, ExchangeServers, ExchangeLegacyServers Partners, and Custom. The default permission groups assigned to a Receive connector depend on the connector usage type that was specified by the Usage parameter when the Receive connector was created. For more information about Receive connector usage types, see Understanding Receive Connectors.

PipeliningEnabled

Optional

System.Boolean

The PipeliningEnabled parameter specifies whether the PIPELINING EHLO keyword is advertised in the EHLO response to the remote server and is available for use. Valid values for this parameter are $true or $false. When the PipeliningEnabled parameter is set to $true, the PIPELINING EHLO keyword is advertised in the EHLO response to the remote server and is available for use. When the PipeliningEnabled parameter is set to $false, the PIPELINING EHLO keyword isn't advertised in the EHLO response to the remote server and is disabled. The PIPELINING extension enables the remote server to send requests without waiting for a response from this Receive connector. The default value is $true.

ProtocolLoggingLevel

Optional

Microsoft.Exchange.Data.ProtocolLoggingLevel

The ProtocolLoggingLevel parameter specifies whether to enable or disable protocol logging for the specified Receive connector. A value of Verbose enables protocol logging for the connector. A value of None disables protocol logging for the connector. The default value is None. The location of the Receive connector protocol logs for all Receive connectors configured on a Hub Transport server or an Edge Transport server is specified by using the ReceiveProtocolLogPath parameter of the Set-TransportServer cmdlet.

RequireEHLODomain

Optional

System.Boolean

The RequireEHLODomain parameter specifies whether the remote computer must provide a domain name in the EHLO handshake after the SMTP connection is established. Valid values for this parameter are $true or $false. The default value is $false. When the RequireEHLODomain parameter is set to $true, the remote computer must provide a domain name in the EHLO handshake after the SMTP connection is established. If the remote computer doesn't provide the domain name, the SMTP connection is closed.

RequireTLS

Optional

System.Boolean

The RequireTLS parameter specifies that all messages received by this connector require TLS transmission. Valid values for this parameter are $true or $false. The default value is $false. When the RequireTLS parameter is set to $true, all messages received by this connector require TLS transmission.

Server

Optional

Microsoft.Exchange.Configuration.Tasks.ServerIdParameter

The Server parameter specifies the server on which the new Receive connector should be created.

SizeEnabled

Optional

Microsoft.Exchange.Data.SizeMode

The SizeEnabled parameter specifies whether the SIZE SMTP extension is enabled. Valid values for this parameter are Enabled, Disabled, or EnabledwithoutValue. The default value is Enabled. When the SizeEnabled parameter is set to Enabled, the SIZE SMTP extension is enabled, and the maximum allowed message size value from the MaxMessageSize parameter is advertised in the EHLO banner. When the SizeEnabled parameter is set to Disabled, the SIZE SMTP extension isn't used, and the maximum allowed message size value is never disclosed to the remote server. When the SizeEnabled parameter is set to EnabledWithoutValue, the SIZE SMTP extension is enabled. However, the maximum allowed message size value from the MaxMessageSize parameter isn't advertised in the EHLO banner. This allows the message to bypass message size checks for authenticated connections between Hub Transport servers. The SIZE SMTP extension is defined in RFC 1870. The SIZE SMTP extension enables the source server to declare the size of the inbound message to the target server. It also allows the target server to declare the maximum message size that it's allowed to accept to the sending server. If the advertised size of the inbound message exceeds the value in the MaxMessageSize parameter, the Receive connector responds to the remote server by using an error code and closes the connection.

SuppressXAnonymousTls

Optional

System.Boolean

The SuppressXAnonymousTls parameter specifies whether this Receive connector supports the standard TLS encryption for incoming connections. By default, all communications between Exchange 2010 Hub Transport servers is protected with TLS. However, if you need to disable TLS on a specific connection in your organization, you can create a specific Receive connector and set the SuppressXAnonymousTls parameter to $true. The default value is $false.

Before you can set this parameter to $true, you must use the Set-TransportServer cmdlet to set the UseDownGradedExchangeServerAuth parameter to $true on the server this Receive connector is configured.

TarpitInterval

Optional

Microsoft.Exchange.Data.EnhancedTimeSpan

The TarpitInterval parameter specifies the amount of time to delay an SMTP response to a remote server that Exchange determines may be abusing the connection. Authenticated connections are never delayed in this manner.

The default value is 5 seconds. To specify a value, enter the value as a time span: dd.hh:mm:ss, where d = days, h = hours, m = minutes, and s = seconds. The valid input range for this parameter is from 00:00:00 through 00:10:00. When you set the value to 00:00:00, you disable the tarpitting interval.

TlsDomainCapabilities

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The TlsDomainCapabilities parameter specifies the different capabilities this Receive connector will make available to specific hosts outside your organization. TLS with certificate validation is used to authenticate remote hosts before these capabilities are offered.

To specify capabilities for a domain, use the following syntax:

<domain name 1>:<capability 1, capability 2,…,capability N>

If you're specifying capabilities for multiple domains, list the configuration for each domain in quotation marks ("), separated by commas. For example:

"contoso.com:AcceptOorgProtocol","fabrikam.com:AcceptOorgProtocol,AcceptOorgHeader"

You can configure the capabilities for non-TLS encrypted incoming connections using the special "NO-TLS" domain.

You can configure the following capabilities for a domain:

AcceptOorgProtocol
AcceptOorgHeader

WhatIf

Optional

System.Management.Automation.SwitchParameter

The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.

Input Types

To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn’t accept input data.

Return Types

To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn’t return data.

Examples

EXAMPLE 1

This example creates the custom Receive connector Test with the following properties:

It listens for incoming SMTP connections on the IP address 10.10.1.1 and port 25.
It accepts incoming SMTP connections only from the IP range 192.168.0.1-192.168.0.24

	Copy Code
New-ReceiveConnector -Name Test -Usage Custom -Bindings 10.10.1.1:25 -RemoteIPRanges 192.168.0.1-192.168.0.24