Monitoring High Availability and Site Resilience

Applies to: Exchange Server 2010 SP3, Exchange Server 2010 SP2

Topic Last Modified: 2012-02-20

Making sure that your servers are operating reliably and that your database copies are healthy are key objectives for daily messaging operations. To help ensure the availability and reliability of your Microsoft Exchange Server 2010 organization, you must actively monitor the hardware, the Windows operating system, and Exchange 2010 services. Proactive monitoring combined with preventive maintenance can help you identify potential errors before a serious problem interferes with the operation of your Exchange organization.

Monitoring your Exchange organization involves regular checking for problems with services or data. Monitoring typically also includes a notification system that sends alerts when problems occur. Windows Server 2008 and Exchange 2010 include several tools and services to help make sure that your Exchange organization is running smoothly. The key advantages to daily monitoring are as follows:

Meeting the requirements of your service level agreements (SLAs)
Ensuring the successful completion of specific administrative tasks, such as daily backup operations
Detecting and addressing issues, such as issues that may affect messaging service or data availability

Within an Exchange 2010 organization, the procedures, roles, and responsibilities involved in operations should be formalized. It's important to understand the connection between sound operational practices and procedures and a healthy infrastructure. Well-documented, thorough operational processes and procedures help make sure that all components in an organization's environment on which Exchange relies are managed efficiently and effectively.

Exchange 2010 includes several built-in tools, scripts and features that can be used as part of regular proactive monitoring when Exchange is configured for high availability or site resilience. The primary monitoring cmdlets for high availability and site resilience are Get-MailboxDatabaseCopyStatus and Test-ReplicationHealth. In addition to providing cmdlets that can perform monitoring functions and report status, Exchange 2010 also features a new event log stream that leverages the crimson channel capabilities in Windows Server, as well as built-in scripts that can collect and analyze data from these event channels.

You can use the details in this topic for monitoring the health and status of mailbox database copies for database availability groups (DAGs).

Contents

Get-MailboxDatabaseCopyStatus Cmdlet

Test-ReplicationHealth Cmdlet

Crimson Channel Event Logging

CollectOverMetrics.ps1 Script

CollectReplicationMetrics.ps1 Script

CheckDatabaseRedundancy.ps1 Script

Get-MailboxDatabaseCopyStatus Cmdlet

You can use the Get-MailboxDatabaseCopyStatus cmdlet to view status information about mailbox database copies. This cmdlet enables you to view information about all copies of a particular database, information about a specific copy of a database on a specific server, or information about all database copies on a server. The following table describes possible values for the copy status of a mailbox database copy.

Database copy status

Database copy status	Description
Failed	The mailbox database copy is in a Failed state because it isn't suspended, and it isn't able to copy or replay log files. While in a Failed state and not suspended, the system will periodically check whether the problem that caused the copy status to change to Failed has been resolved. After the system has detected that the problem is resolved, and barring no other issues, the copy status will automatically change to Healthy.
Seeding	The mailbox database copy is being seeded, the content index for the mailbox database copy is being seeded, or both are being seeded. Upon successful completion of seeding, the copy status should change to Initializing.
SeedingSource	The mailbox database copy is being used as a source for a database copy seeding operation.
Suspended	The mailbox database copy is in a Suspended state as a result of an administrator manually suspending the database copy by running the Suspend-MailboxDatabaseCopy cmdlet.
Healthy	The mailbox database copy is successfully copying and replaying log files, or it has successfully copied and replayed all available log files.
ServiceDown	The Microsoft Exchange Replication service isn't available or running on the server that hosts the mailbox database copy.
Initializing	The mailbox database copy will be in an Initializing state when a database copy has been created, when the Microsoft Exchange Replication service is starting or has just been started, and during transitions from Suspended, ServiceDown, Failed, Seeding, SinglePageRestore, LostWrite, or Disconnected to another state. While in this state, the system is verifying that the database and log stream are in a consistent state. In most cases, the copy status will remain in the Initializing state for about 15 seconds, but in all cases, it should generally not be in this state for longer than 30 seconds.
Resynchronizing	The mailbox database copy and its log files are being compared with the active copy of the database to check for any divergence between the two copies. The copy status will remain in this state until any divergence is detected and resolved.
Mounted	The active copy is online and accepting client connections. Only the active copy of the mailbox database copy can have a copy status of Mounted.
Dismounted	The active copy is offline and not accepting client connections. Only the active copy of the mailbox database copy can have a copy status of Dismounted.
Mounting	The active copy is coming online and not yet accepting client connections. Only the active copy of the mailbox database copy can have a copy status of Mounting.
Dismounting	The active copy is going offline and terminating client connections. Only the active copy of the mailbox database copy can have a copy status of Dismounting.
DisconnectedAndHealthy	The mailbox database copy is no longer connected to the active database copy, and it was in the Healthy state when the loss of connection occurred. This state represents the database copy with respect to connectivity to its source database copy. It may be reported during DAG network failures between the source copy and the target database copy.
DisconnectedAndResynchronizing	The mailbox database copy is no longer connected to the active database copy, and it was in the Resynchronizing state when the loss of connection occurred. This state represents the database copy with respect to connectivity to its source database copy. It may be reported during DAG network failures between the source copy and the target database copy.
FailedAndSuspended	The Failed and Suspended states have been set simultaneously by the system because a failure was detected, and because resolution of the failure explicitly requires administrator intervention. An example is if the system detects unrecoverable divergence between the active mailbox database and a database copy. Unlike the Failed state, the system won't periodically check whether the problem has been resolved, and automatically recover. Instead, an administrator must intervene to resolve the underlying cause of the failure before the database copy can be transitioned to a healthy state.
SinglePageRestore	This state indicates that a single page restore operation is occurring on the mailbox database copy.

The Get-MailboxDatabaseCopyStatus cmdlet also includes a parameter called ConnectionStatus, which returns details about the in-use replication networks. If you use this parameter, two additional output fields, IncomingLogCopyingNetwork and SeedingNetwork, will be populated in the task's output.

Get-MailboxDatabaseCopyStatus Examples

The following examples use the Get-MailboxDatabaseCopyStatus cmdlet. Each example pipes the results to the Format-List cmdlet to display the output in list format.

This example returns status information for all copies of the database DB2.

	Copy Code
Get-MailboxDatabaseCopyStatus -Identity DB2 \| Format-List

This example returns the status for all database copies on the Mailbox server MBX2.

	Copy Code
Get-MailboxDatabaseCopyStatus -Server MBX2 \| Format-List

This example returns the status for all database copies on the local Mailbox server.

	Copy Code
Get-MailboxDatabaseCopyStatus -Local \| Format-List

This example returns status, log shipping, and seeding network information for the database DB3 on the Mailbox server MBX1.

	Copy Code
Get-MailboxDatabaseCopyStatus -Identity DB3\MBX1 -ConnectionStatus \| Format-List

For more information about using the Get-MailboxDatabaseCopyStatus cmdlet, see Get-MailboxDatabaseCopyStatus.

Return to top

Test-ReplicationHealth Cmdlet

You can use the Test-ReplicationHealth cmdlet to view continuous replication status information about mailbox database copies. This cmdlet can be used to check all aspects of the replication and replay status to provide a complete overview of a specific Mailbox server in a DAG.

The Test-ReplicationHealth cmdlet is designed for the proactive monitoring of continuous replication and the continuous replication pipeline, the availability of Active Manager, and the health and status of the underlying cluster service, quorum, and network components. It can be run locally on or remotely against any Mailbox server in a DAG. The Test-ReplicationHealth cmdlet performs the tests listed in the following table.

Test-ReplicationHealth cmdlet tests

Test name	Description
ClusterService	Verifies that the Cluster service is running and reachable on the specified DAG member, or if no DAG member is specified, on the local server.
ReplayService	Verifies that the Microsoft Exchange Replication service is running and reachable on the specified DAG member, or if no DAG member is specified, on the local server.
ActiveManager	Verifies that the instance of Active Manager running on the specified DAG member (or if no DAG member is specified, the local server) is in a valid role (primary, secondary, or stand-alone).
TasksRpcListener	Verifies that the tasks remote procedure call (RPC) server is running and reachable on the specified DAG member, or if no DAG member is specified, on the local server.
TcpListener	Verifies that the TCP log copy listener is running and reachable on the specified DAG member, or if no DAG member is specified, on the local server.
DagMembersUp	Verifies that all DAG members are available, running, and reachable.
ClusterNetwork	Verifies that all cluster-managed networks on the specified DAG member (or if no DAG member is specified, the local server) are available.
QuorumGroup	Verifies that the default cluster group (quorum group) is in a healthy and online state.
FileShareQuorum	Verifies that the witness server and witness directory and share configured for the DAG are reachable.
DBCopySuspended	Checks whether any mailbox database copies are in a state of Suspended on the specified DAG member, or if no DAG member is specified, on the local server.
DBCopyFailed	Checks whether any mailbox database copies are in a state of Failed on the specified DAG member, or if no DAG member is specified, on the local server.
DBInitializing	Checks whether any mailbox database copies are in a state of Initializing on the specified DAG member, or if no DAG member is specified, on the local server.
DBDisconnected	Checks whether any mailbox database copies are in a state of Disconnected on the specified DAG member, or if no DAG member is specified, on the local server.
DBLogCopyKeepingUp	Verifies that log copying and inspection by the passive copies of databases on the specified DAG member (or if no DAG member is specified, on the local server) are able to keep up with log generation activity on the active copy.
DBLogReplayKeepingUp	Verifies that replay activity for the passive copies of databases on the specified DAG member (or if no DAG member is specified, on the local server) is able to keep up with log copying and inspection activity.

Test-ReplicationHealth Example

This example uses the Test-ReplicationHealth cmdlet to test the health of replication for the Mailbox server MBX1.

	Copy Code
Test-ReplicationHealth -Identity MBX1

Return to top

Crimson Channel Event Logging

Windows Server 2008 includes two categories of event logs: Windows logs, and Applications and Services logs. The Windows logs category includes the event logs available in previous versions of Windows: Application, Security, and System event logs. It also includes two new logs: the Setup log and the ForwardedEvents log. Windows logs are intended to store events from legacy applications and events that apply to the entire system.

Applications and Services logs are a new category of event logs. These logs store events from a single application or component rather than events that might have system-wide impact. This new category of event logs is referred to as an application's crimson channel.

The Applications and Services logs category includes four subtypes: Admin, Operational, Analytic, and Debug logs. Events in Admin logs are of particular interest if you use event log records to troubleshoot problems. Events in the Admin log should provide you with guidance about how to respond to the events. Events in the Operational log are also useful, but may require more interpretation. Admin and Debug logs aren't as user friendly. Analytic logs (which by default are hidden and disabled) store events that trace an issue, and often a high volume of events are logged. Debug logs are used by developers when debugging applications.

Exchange 2010 logs events to crimson channels in the Applications and Services logs area. You can view these channels by performing these steps:

Open Event Viewer.
In the console tree, navigate to Applications and Services Logs > Microsoft > Exchange.
Under Exchange, select a crimson channel: HighAvailability or MailboxDatabaseFailureItems.

The HighAvailability channel contains events related to startup and shutdown of the Microsoft Exchange Replication service, and the various components that run within the Microsoft Exchange Replication service, such as Active Manager, the third-party synchronous replication API, the tasks RPC server, TCP listener, and Volume Shadow Copy Service (VSS) writer. The HighAvailability channel is also used by Active Manager to log events related to Active Manager role monitoring and database action events, such as a database mount operation and log truncation, and to record events related to the DAG's underlying cluster.

The MailboxDatabaseFailureItems channel is used to log events associated with any failures that affect a replicated mailbox database.

Return to top

CollectOverMetrics.ps1 Script

Exchange 2010 includes a script called CollectOverMetrics.ps1, which can be found in the Scripts folder. CollectOverMetrics.ps1 reads DAG member event logs to gather information about database operations (such as database mounts, moves, and failovers) over a specific time period. For each operation, the script records the following information:

Identity of the database
Time at which the operation began and ended
Servers on which the database was mounted at the start and finish of the operation
Reason for the operation
If the operation was successful, including the error details if the operation failed

The script writes this information to .csv files with one operation per row. It writes a separate .csv file for each DAG.

The script supports parameters that allow you to customize the script's behavior and output. For example, the results can be restricted to a specified subset by using the Database or ReportFilter parameters. Only the operations that match these filters will be included in the summary HTML report. The available parameters are listed in the following table.

CollectOverMetrics.ps1 script parameters

Parameter	Description
DatabaseAvailabilityGroup	Specifies the name of the DAG from which you want to collect metrics. If this parameter is omitted, the DAG of which the local server is a member will be used. Wildcard characters can be used to collect information from and report on multiple DAGs.
Database	Provides a list of databases for which the report needs to be generated. Wildcard characters are supported, for example, `-Database:"DB1","DB2"` or `-Database:"DB*"`.
StartTime	Specifies the duration of the time period to report on. The script gathers only the events logged during this period. As a result, the script may capture partial operation records (for example, only the end of an operation at the start of the period or vice-versa). If neither StartTime nor EndTime is specified, the script defaults to the past 24 hours. If only one parameter is specified, the period will be 24 hours, either beginning or ending at the specified time.
EndTime	Specifies the duration of the time period to report on. The script gathers only the events logged during this period. As a result, the script may capture partial operation records (for example, only the end of an operation at the start of the period or vice-versa). If neither StartTime nor EndTime is specified, the script defaults to the past 24 hours If only one parameter is specified, the period will be 24 hours, either beginning or ending at the specified time.
ReportPath	Specifies the folder used to store the results of event processing. If this parameter is omitted, the Scripts folder will be used. When specified, the script takes a list of .csv files generated by the script and uses them as the source data to generate a summary HTML report. The report is the same one that is generated with the -GenerateHtmlReport option. The files can be generated across multiple database availability groups at many different times, or even with overlapping times, and the script will merge all of their data together.
GenerateHtmlReport	Specifies that the script gather all the information it has recorded, group the data by the operation type, and then generate an HTML file that includes statistics for each of these groups. The report includes the total number of operations in each group, the number of operations that failed, and statistics for the time taken within each group. The report also contains a breakdown of the types of errors that resulted in failed operations.
ShowHtmlReport	Specifies that the HTML-generated report should be displayed in a Web browser after its generated.
SummariseCSVFiles	Specifies that the script read the data from existing .csv files that were previously generated by the script. This data is then used to generate a summary report similar to the report generated by the GenerateHtmlReport parameter.
ActionType	Specifies the type of operational actions the script should collect. The values for this parameter are `Move`, `Mount`, `Dismount`, and `Remount`. The `Move` value refers to any time that the database changes its active server, whether by controlled moves or by failovers. The `Mount`, `Dismount`, and `Remount` values refer to times that the database changes its mounted status without moving to another computer.
ActionTrigger	Specifies which administrative operations should be collected by the script. The values for this parameter are `Admin` or `Automatic`. Automatic actions are those performed automatically by the system (for example, a failover when a server goes offline). Admin actions are any actions that were performed by an administrator using either the Exchange Management Shell or the Exchange Management Console.
RawOutput	Specifies that the script writes the results that would have been written to .csv files directly to the output stream, as would happen with write-output. This information can then be piped to other commands.
IncludedExtendedEvents	Specifies that the script collects the events that provide diagnostic details of times spent mounting databases. This can be a very time-consuming stage if the Application event log on the servers is very large.
MergeCSVFiles	Specifies that the script takes all the .csv files containing data about each operation and merges them into a single .csv file.
ReportFilter	Specifies that a filter should be applied to the operations using the fields as they appear in the .csv files. This parameter uses the same format as a `Where` operation, with each element set to `$_` and returning a Boolean value. For example: `{$_DatabaseName -notlike "Mailbox Database*"}` can be used to exclude the default databases from the report.

CollectOverMetrics.ps1 Examples

The following example collects metrics for all databases that match DB* (which includes a wildcard character) in a DAG named DAG1. After the metrics are collected, an HTML report is generated and displayed.

	Copy Code
CollectOverMetrics.ps1 -DatabaseAvailabilityGroup DAG1 -Database:"DB*" -GenerateHTMLReport -ShowHTMLReport

The following examples demonstrate ways that the summary HTML report may be filtered. The first uses the Database parameter, which takes a list of database names. The summary report then contains data only about those databases. The next two examples use the ReportFilter option. The last example filters out all the default databases.

	Copy Code
CollectOverMetrics -SummariseCsvFiles (dir .csv) -Database MailboxDatabase123,MailboxDatabase456 CollectOverMetrics -SummariseCsvFiles (dir .csv) -ReportFilter { $_.DatabaseName -notlike "Mailbox Database" } CollectOverMetrics -SummariseCsvFiles (dir .csv) -ReportFilter { ($_.ActiveOnStart -like "ServerXYZ") -and ($_.ActiveOnEnd -notlike "ServerXYZ") }

Copy Code

CollectOverMetrics -SummariseCsvFiles (dir *.csv) -Database MailboxDatabase123,MailboxDatabase456
CollectOverMetrics -SummariseCsvFiles (dir *.csv) -ReportFilter { $_.DatabaseName -notlike "Mailbox Database*" }
CollectOverMetrics -SummariseCsvFiles (dir *.csv) -ReportFilter { ($_.ActiveOnStart -like "ServerXYZ*") -and ($_.ActiveOnEnd -notlike "ServerXYZ*") }

Return to top

CollectReplicationMetrics.ps1 Script

CollectReplicationMetrics.ps1 is another health metric script included in Exchange 2010. This script provides an active form of monitoring because it collects metrics in real time, while the script is running. CollectReplicationMetrics.ps1 collects data from performance counters related to database replication. The script gathers counter data from multiple Mailbox servers, writes each server's data to a .csv file, and can then report various statistics across all of this data (for example, the amount of time each copy was failed or suspended, the average copy or replay queue length, or the amount of time that copies were outside of their failover criteria).

You can either specify the servers individually, or you can specify entire DAGs. You can either run the script can to first collect the data and then generate the report, or you can run it just gather the data or to only report on data that's already been collected. You can specify the frequency at which data should be sampled and the total duration to gather data.

The data collected from each server is written to a file named CounterData.<ServerName>.<TimeStamp>.csv. The summary report will be written to a file named HaReplPerfReport.<DAGName>.<TimeStamp>.csv, or HaReplPerfReport.<TimeStamp>.csv if you didn't run the script was with the DagName parameter.

The script starts PowerShell jobs to collect the data from each server. These jobs run for the full period in which data is being collected. If you specify a large number of servers, this process can use a considerable amount of memory. The final stage of the process, when data is processed into a summary report, can also be quite time consuming for large amounts of data. It's possible to run the collection stage on one computer, and then copy the data elsewhere for processing.

The CollectReplicationMetrics.ps1 script supports parameters that allow you to customize the script's behavior and output. The available parameters are listed in the following table.

CollectReplicationMetrics.ps1 script parameters

Parameter	Description
DagName	Specifies the name of the DAG from which you want to collect metrics. If this parameter is omitted, the DAG of which the local server is a member will be used.
DatabaseNames	Provides a list of databases for which the report needs to be generated. Wildcards characters are supported for use, for example, `-DatabaseNames:"DB1","DB2"` or `-DatabaseNames:"DB*"`.
ReportPath	Specifies the folder used to store the results of event processing. If this parameter is omitted, the Scripts folder will be used.
Duration	Specifies the amount of time the collection process should run. Typical values would be one to three hours. Longer durations should be used only with long intervals between each sample or as a series of shorter jobs run by scheduled tasks.
Frequency	Specifies the frequency at which data metrics are collected. Typical values would be 30 seconds, one minute, or five minutes. Under normal circumstances, intervals that are shorter than these won't show significant changes between each sample.
Servers	Specifies the identity of the servers from which to collect statistics. You can specify any value, including wildcard characters or GUIDs.
SummariseFiles	Specifies a list of .csv files to generate a summary report. These files are the files named CounterData.<CounterData>* and are generated by the CollectReplicationMetrics.ps1 script.
Mode	Specifies the processing stages that the script executes. You can use the following values: `CollectAndReport` This is the default value. This value signifies that the script should both collect the data from the servers and then process them to produce the summary report. `CollectOnly` This value signifies that the script should just collect the data and not produce the report. `ProcessOnly` This value signifies that the script should import data from a set of .csv files and process them to produce the summary report. The SummariseFiles parameter is used to provide the script with the list of files to process.
MoveFilestoArchive	Specifies that the script should move the files to a compressed folder after processing.
LoadExchangeSnapin	Specifies that the script should load the Exchange Shell commands. This parameter is useful when the script needs to run from outside the Exchange Management Shell, such as in a scheduled task.

CollectReplicationMetrics.ps1 Example

The following example gathers one hour's worth of data from all the servers in the DAG "DAG1", sampled at one minute intervals, and then generates a summary report. In addition, the ReportPath parameter is used, which causes the script to place all the files in the current directory.

	Copy Code
CollectReplicationMetrics.ps1 -DagName DAG1 -Duration "01:00:00" -Frequency "00:01:00" -ReportPath

The following example reads the data from all the files matching "CounterData*" and then generates a summary report.

	Copy Code
CollectReplicationMetrics.ps1 -SummariseFiles (dir CounterData*) -Mode ProcessOnly -ReportPath

Return to top

CheckDatabaseRedundancy.ps1 Script

As its name implies, the purpose of the CheckDatabaseRedundancy.ps1 script is to monitor the redundancy of replicated mailbox databases by validating that there is at least two configured and healthy and current copies, and to alert you when only a single healthy copy of a replicated database exists. In this case, both active and passive copies are counted when determining redundancy.

When the Mailbox server role is installed, the CheckDatabaseRedundancy.ps1 script is automatically configured by Exchange to run as a scheduled task named Database One Copy Alert. By default, the Database One Copy Alert scheduled task is configured to run every 60 minutes. You can modify this behavior and the scheduled task settings using the Windows Task Scheduler. The script is designed to first check for DAG membership, so if the Mailbox server is not a member of a DAG, the script exits out right away.

The script can also be run interactively from the scripts folder. When running the script interactively, you must specify either a database name or a DAG member name. To specify a database, you use the MailboxDatabaseName parameter and to specify a DAG member, you use the MailboxServerName parameter. When run interactively in the console, the script performs the redundancy check only once, and outputs the CurrentState (red or green) on the screen.

Like other scripts and cmdlets, CheckDatabaseRedundancy.ps1 can also be run in monitoring mode and generate events by adding the MonitoringContext parameter. The scheduled task created by Exchange runs the script in monitoring mode. This mode also enables the script to be invoked by a monitoring solution, such as Microsoft System Center Operations Manager (SCOM). In monitoring mode, the script generates red alert and green alert events into the local server’s Application event log. A red alert event (event ID 4113) is generated only if the database has been “red” for 20 minutes more (in duration, not consecutive) in the hour-long run of the script, and a green alert event (event ID 4114) when the database has been “green” for 10 consecutive minutes. By default, once a red alert event is generated, it will continue to be reported every 15 minutes.

In addition, the script has some other useful options. For example, you can add the ShowDetailedErrors parameter to get greater detail about any errors that occur, and you can add the Verbose parameter for additional troubleshooting information. The script also includes a SendSummaryMailTos parameter which can be used to send a summary report by email to a list of specified email addresses when the script has finished running. This enables administrators to quickly look at hourly reports to see if any redundancy issues have occurred. If you do use the email functionality, you’ll need to include the SummaryMailFrom parameter whenever you use the SendSummaryMailTos parameter.

Microsoft recommends running this script regularly, as part of your normal monitoring operations, using either the automated scheduled task, or a monitoring system such as SCOM. To ensure you don’t have lengthy periods in which database redundancy is compromised, run the script every 60 minutes. The script includes a parameter called TerminateAfterDurationSecs, which when set to -1 or 0 when executing the script, can be used to run the script for an infinite amount of time.

If you’re not running a monitoring solution such as SCOM, we recommend you allow the automatically created scheduled task to automate and schedule script execution.

There are known issues in the Windows Server 2008 SP2 Task Scheduler that may cause Task Scheduler to crash when you have scheduled a long-running task. These issues do not exist in Windows Server 2008 R2; so if possible, run the script from Windows Server 2008 R2. If you can’t run the script from Windows Server 2008 R2, and you’re running it from Windows Server 2008 SP2, we recommend two modifications. First, instead of running the script with its built-in transient suppression of 60 minutes, run the script every 5 minutes by using the following parameters:

	Copy Code
CheckDatabaseRedundancy.ps1 -MonitoringContext -SleepDurationBetweenIterationsSecs:0 -TerminateAfterDurationSecs:1 -SuppressGreenEventForSecs:0 -ReportRedEventAfterDurationSecs:0 -ReportRedEventIntervalSecs:0 -ShowDetailedErrors

Copy Code

CheckDatabaseRedundancy.ps1 -MonitoringContext -SleepDurationBetweenIterationsSecs:0 -TerminateAfterDurationSecs:1 -SuppressGreenEventForSecs:0 -ReportRedEventAfterDurationSecs:0 -ReportRedEventIntervalSecs:0 -ShowDetailedErrors

Second, if possible, use SCOM to define the transient suppression behavior (e.g., if 3 red alert events are logged within a 20 minute period, generate an alert; and if a green alert event is logged, change the CurrentState to green).

If the Database One Copy Alert scheduled task is altered or removed, you can delete and re-schedule by running the following command:

	Copy Code
schtasks /create /TN "Check Database Redundancy" /TR "Powershell.exe -NonInteractive -WindowStyle Hidden -command 'C:\Program Files\Microsoft\Exchange Server\V14\bin\RemoteExchange.ps1'; Connect-ExchangeServer -auto; 'C:\Program Files\Microsoft\Exchange Server\V14\Scripts\CheckDatabaseRedundancy.ps1 -MonitoringContext -ShowDetailedErrors -SummaryMailFrom:'SMTPFromAddress@contoso.com' -SendSummaryMailTos:@('SMTPToAddress@contoso.com') -ErrorAction:Continue" /RU SYSTEM /SC HOURLY

Copy Code

schtasks /create /TN "Check Database Redundancy" /TR "Powershell.exe -NonInteractive -WindowStyle Hidden -command 'C:\Program Files\Microsoft\Exchange Server\V14\bin\RemoteExchange.ps1'; Connect-ExchangeServer -auto; 'C:\Program Files\Microsoft\Exchange Server\V14\Scripts\CheckDatabaseRedundancy.ps1 -MonitoringContext -ShowDetailedErrors -SummaryMailFrom:'SMTPFromAddress@contoso.com' -SendSummaryMailTos:@('SMTPToAddress@contoso.com') -ErrorAction:Continue" /RU SYSTEM /SC HOURLY

Replace the parameters in the above script with the script parameters you want to use. Additional parameters for the script are also described in the script.

When using the schtasks command line tool to create a scheduled task, the /TR option is limited to 261 characters. The above example exceeds that limit. If the parameters and paths you use cause the /TR option to exceed 261 characters then you must manually create the scheduled task using the Task Scheduler applet on the Administrative Tools menu. Alternatively, you can copy and paste the following XML into Notepad, edit it appropriately, save it as an XML file and import it using the Task Scheduler applet.

	Copy Code
<?xml version="1.0" encoding="UTF-16"?> <Task version="1.2" xmlns="http://schemas.microsoft.com/windows/2004/02/mit/task"> <RegistrationInfo> <Date>2010-05-11T15:55:47</Date> <Author>administrator</Author> </RegistrationInfo> <Triggers> <TimeTrigger> <Repetition> <Interval>PT1H</Interval> <StopAtDurationEnd>false</StopAtDurationEnd> </Repetition> <StartBoundary>2010-05-11T15:55:00</StartBoundary> <Enabled>true</Enabled> </TimeTrigger> </Triggers> <Principals> <Principal id="Author"> <UserId>SYSTEM</UserId> <RunLevel>HighestAvailable</RunLevel> </Principal> </Principals> <Settings> <IdleSettings> <Duration>PT10M</Duration> <WaitTimeout>PT1H</WaitTimeout> <StopOnIdleEnd>true</StopOnIdleEnd> <RestartOnIdle>false</RestartOnIdle> </IdleSettings> <MultipleInstancesPolicy>IgnoreNew</MultipleInstancesPolicy> <DisallowStartIfOnBatteries>true</DisallowStartIfOnBatteries> <StopIfGoingOnBatteries>true</StopIfGoingOnBatteries> <AllowHardTerminate>true</AllowHardTerminate> <StartWhenAvailable>false</StartWhenAvailable> <RunOnlyIfNetworkAvailable>false</RunOnlyIfNetworkAvailable> <AllowStartOnDemand>true</AllowStartOnDemand> <Enabled>true</Enabled> <Hidden>false</Hidden> <RunOnlyIfIdle>false</RunOnlyIfIdle> <WakeToRun>false</WakeToRun> <ExecutionTimeLimit>PT72H</ExecutionTimeLimit> <Priority>7</Priority> </Settings> <Actions Context="Author"> <Exec> <Command>Powershell.exe</Command> <Arguments>-NonInteractive -WindowStyle Hidden -command 'C:\Program Files\Microsoft\Exchange Server\V14\bin\RemoteExchange.ps1'; Connect-ExchangeServer -auto; C:\Operations\CheckDatabaseRedundancy.ps1 -MonitoringContext -ShowDetailedErrors -SummaryMailFrom:'SMTPFromAddress@contoso.com' -SendSummaryMailTos:@('SMTPToAddress@contoso.com') -ErrorAction:Continue</Arguments> </Exec> </Actions> </Task>

Copy Code

<?xml version="1.0" encoding="UTF-16"?>
<Task version="1.2" xmlns="http://schemas.microsoft.com/windows/2004/02/mit/task">
  <RegistrationInfo>
	<Date>2010-05-11T15:55:47</Date>
	<Author>administrator</Author>
  </RegistrationInfo>
  <Triggers>
	<TimeTrigger>
	<Repetition>
		<Interval>PT1H</Interval>
		<StopAtDurationEnd>false</StopAtDurationEnd>
	</Repetition>
	<StartBoundary>2010-05-11T15:55:00</StartBoundary>
	<Enabled>true</Enabled>
	</TimeTrigger>
  </Triggers>
  <Principals>
	<Principal id="Author">
	<UserId>SYSTEM</UserId>
	<RunLevel>HighestAvailable</RunLevel>
	</Principal>
  </Principals>
  <Settings>
	<IdleSettings>
	<Duration>PT10M</Duration>
	<WaitTimeout>PT1H</WaitTimeout>
	<StopOnIdleEnd>true</StopOnIdleEnd>
	<RestartOnIdle>false</RestartOnIdle>
	</IdleSettings>
	<MultipleInstancesPolicy>IgnoreNew</MultipleInstancesPolicy>
	<DisallowStartIfOnBatteries>true</DisallowStartIfOnBatteries>
	<StopIfGoingOnBatteries>true</StopIfGoingOnBatteries>
	<AllowHardTerminate>true</AllowHardTerminate>
	<StartWhenAvailable>false</StartWhenAvailable>
	<RunOnlyIfNetworkAvailable>false</RunOnlyIfNetworkAvailable>
	<AllowStartOnDemand>true</AllowStartOnDemand>
	<Enabled>true</Enabled>
	<Hidden>false</Hidden>
	<RunOnlyIfIdle>false</RunOnlyIfIdle>
	<WakeToRun>false</WakeToRun>
	<ExecutionTimeLimit>PT72H</ExecutionTimeLimit>
	<Priority>7</Priority>
  </Settings>
  <Actions Context="Author">
	<Exec>
	<Command>Powershell.exe</Command>
	<Arguments>-NonInteractive -WindowStyle Hidden -command 'C:\Program Files\Microsoft\Exchange Server\V14\bin\RemoteExchange.ps1'; Connect-ExchangeServer -auto; C:\Operations\CheckDatabaseRedundancy.ps1 -MonitoringContext -ShowDetailedErrors -SummaryMailFrom:'SMTPFromAddress@contoso.com' -SendSummaryMailTos:@('SMTPToAddress@contoso.com') -ErrorAction:Continue</Arguments>
	</Exec>
  </Actions>
</Task>

Return to top