Applies to: Exchange Server 2007 SP3, Exchange Server 2007 SP2, Exchange Server 2007 SP1
Topic Last Modified: 2009-05-14

The Set-ActiveSyncVirtualDirectory command enables you to configure the Microsoft Exchange ActiveSync settings on a specified virtual directory.

Syntax


Set-ActiveSyncVirtualDirectory -Identity <VirtualDirectoryIdParameter> [-ActiveSyncServer <String>] [-BadItemReportingEnabled <$true \| $false>] [-BasicAuthEnabled <$true \| $false>] [-ClientCertAuth <Ignore \| Accepted \| Required>] [-CompressionEnabled <$true \| $false>] [-Confirm [<SwitchParameter>]] [-DomainController <Fqdn>] [-ExternalAuthenticationMethods <MultiValuedProperty>] [-ExternalUrl <Uri>] [-InstallIsapiFilter <$true \| $false>] [-InstallProxySubDirectory <$true \| $false>] [-InternalAuthenticationMethods <MultiValuedProperty>] [-InternalUrl <Uri>] [-MobileClientCertificateAuthorityURL <String>] [-MobileClientCertificateProvisioningEnabled <$true \| $false>] [-MobileClientCertTemplateName <String>] [-Name <String>] [-RemoteDocumentsActionForUnknownServers <Nullable>] [-RemoteDocumentsAllowedServers <MultiValuedProperty>] [-RemoteDocumentsBlockedServers <MultiValuedProperty>] [-RemoteDocumentsInternalDomainSuffixList <MultiValuedProperty>] [-WhatIf [<SwitchParameter>]] [-WindowsAuthEnabled <$true \| $false>]

Set-ActiveSyncVirtualDirectory -Identity
<VirtualDirectoryIdParameter> [-ActiveSyncServer
<String>] [-BadItemReportingEnabled <$true | $false>]
[-BasicAuthEnabled <$true | $false>] [-ClientCertAuth
<Ignore | Accepted | Required>] [-CompressionEnabled
<$true | $false>] [-Confirm [<SwitchParameter>]]
[-DomainController <Fqdn>] [-ExternalAuthenticationMethods
<MultiValuedProperty>] [-ExternalUrl <Uri>]
[-InstallIsapiFilter <$true | $false>]
[-InstallProxySubDirectory <$true | $false>]
[-InternalAuthenticationMethods <MultiValuedProperty>]
[-InternalUrl <Uri>] [-MobileClientCertificateAuthorityURL
<String>] [-MobileClientCertificateProvisioningEnabled
<$true | $false>] [-MobileClientCertTemplateName
<String>] [-Name <String>]
[-RemoteDocumentsActionForUnknownServers <Nullable>]
[-RemoteDocumentsAllowedServers <MultiValuedProperty>]
[-RemoteDocumentsBlockedServers <MultiValuedProperty>]
[-RemoteDocumentsInternalDomainSuffixList
<MultiValuedProperty>] [-WhatIf [<SwitchParameter>]]
[-WindowsAuthEnabled <$true | $false>]


Set-ActiveSyncVirtualDirectory [-ActiveSyncServer <String>] [-BadItemReportingEnabled <$true \| $false>] [-BasicAuthEnabled <$true \| $false>] [-ClientCertAuth <Ignore \| Accepted \| Required>] [-CompressionEnabled <$true \| $false>] [-Confirm [<SwitchParameter>]] [-DomainController <Fqdn>] [-ExternalAuthenticationMethods <MultiValuedProperty>] [-ExternalUrl <Uri>] [-InstallIsapiFilter <$true \| $false>] [-InstallProxySubDirectory <$true \| $false>] [-Instance <ADMobileVirtualDirectory>] [-InternalAuthenticationMethods <MultiValuedProperty>] [-InternalUrl <Uri>] [-MobileClientCertificateAuthorityURL <String>] [-MobileClientCertificateProvisioningEnabled <$true \| $false>] [-MobileClientCertTemplateName <String>] [-Name <String>] [-RemoteDocumentsActionForUnknownServers <Nullable>] [-RemoteDocumentsAllowedServers <MultiValuedProperty>] [-RemoteDocumentsBlockedServers <MultiValuedProperty>] [-RemoteDocumentsInternalDomainSuffixList <MultiValuedProperty>] [-WhatIf [<SwitchParameter>]] [-WindowsAuthEnabled <$true \| $false>]

Set-ActiveSyncVirtualDirectory [-ActiveSyncServer
<String>] [-BadItemReportingEnabled <$true | $false>]
[-BasicAuthEnabled <$true | $false>] [-ClientCertAuth
<Ignore | Accepted | Required>] [-CompressionEnabled
<$true | $false>] [-Confirm [<SwitchParameter>]]
[-DomainController <Fqdn>] [-ExternalAuthenticationMethods
<MultiValuedProperty>] [-ExternalUrl <Uri>]
[-InstallIsapiFilter <$true | $false>]
[-InstallProxySubDirectory <$true | $false>] [-Instance
<ADMobileVirtualDirectory>] [-InternalAuthenticationMethods
<MultiValuedProperty>] [-InternalUrl <Uri>]
[-MobileClientCertificateAuthorityURL <String>]
[-MobileClientCertificateProvisioningEnabled <$true |
$false>] [-MobileClientCertTemplateName <String>] [-Name
<String>] [-RemoteDocumentsActionForUnknownServers
<Nullable>] [-RemoteDocumentsAllowedServers
<MultiValuedProperty>] [-RemoteDocumentsBlockedServers
<MultiValuedProperty>]
[-RemoteDocumentsInternalDomainSuffixList
<MultiValuedProperty>] [-WhatIf [<SwitchParameter>]]
[-WindowsAuthEnabled <$true | $false>]

Parameters

Parameter	Required	Type	Description
Identity	Required	Microsoft.Exchange.Configuration.Tasks.VirtualDirectoryIdParameter	This parameter uniquely identifies the Exchange ActiveSync virtual directory that is to be configured. This value must be website\microsoft-server-activesync.
ActiveSyncServer	Optional	System.String	This parameter specifies the URL of the Client Access server. It will be in the following format: https://servername/Microsoft-Server-ActiveSync.
BadItemReportingEnabled	Optional	System.Boolean	This parameter specifies whether items that cannot be synchronized should be reported to the user. If set to `$true`, the user receives a notification when an item cannot be synchronized to the mobile device.
BasicAuthEnabled	Optional	System.Boolean	This parameter enables or disables Basic authentication. The default setting is `$true`.
ClientCertAuth	Optional	Microsoft.Exchange.Data.Directory.SystemConfiguration.ClientCertAuthTypes	This parameter specifies the status of client certificate authentication. By default, client certificate authentication is disabled. The default value of this parameter is `$null`.
CompressionEnabled	Optional	System.Boolean	This parameter is an integer that identifies the compression applied to the specified Exchange ActiveSync virtual directory. The default setting is `$true`.
Confirm	Optional	System.Management.Automation.SwitchParameter	This parameter causes the command to pause processing and requires that you acknowledge what the command will do before processing continues. You do not have to specify a value with the Confirm parameter.
DomainController	Optional	Microsoft.Exchange.Data.Fqdn	To specify the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to the Active Directory directory service, include the DomainController parameter on the command.
ExternalAuthenticationMethods	Optional	Microsoft.Exchange.Data.MultiValuedProperty	This parameter specifies the authentication methods that are supported by the server that contains the virtual directory when access is requested from outside the network firewall. If this parameter is not set, all authentication methods can be used.
ExternalUrl	Optional	System.Uri	This parameter specifies the URL that is used to connect to the virtual directory from outside the network firewall.
InstallIsapiFilter	Optional	System.Boolean	The InstallIsapiFilter parameter specifies whether the Internet Server API (ISAPI) filter is installed.
InstallProxySubDirectory	Optional	System.Boolean	The InstallProxySubDirectory parameter controls how to create the new Exchange ActiveSync subdirectory that is used as a proxy between Microsoft Exchange Server 2010 and Exchange Server 2007.
Instance	Optional	Microsoft.Exchange.Data.Directory.SystemConfiguration.ADMobileVirtualDirectory	The Instance parameter enables you to pass a whole object to the command to be processed. It is mainly used in scripts where a whole object must be passed to the command.
InternalAuthenticationMethods	Optional	Microsoft.Exchange.Data.MultiValuedProperty	This parameter specifies the authentication methods that are supported by the server that contains the virtual directory when access is requested from inside the network firewall. If this parameter is not set, all authentication methods can be used.
InternalUrl	Optional	System.Uri	This parameter is used for the Client Access server HTTP Proxy feature. If it is set, the Client Access server that is receiving the incoming client connections will proxy the requests to this URL. This can be an Internet- facing fully qualified domain name (FQDN) URL or an internal host name.
MobileClientCertificateAuthorityURL	Optional	System.String	This parameter specifies the URL for the certification authority (CA) that is used by the mobile device.
MobileClientCertificateProvisioningEnabled	Optional	System.Boolean	This parameter specifies whether the Autodiscover service will return the Certificate Services Server URL in the XML file.
MobileClientCertTemplateName	Optional	System.String	This parameter specifies the template name for the client certificate.
Name	Optional	System.String	This parameter specifies the name of the Exchange ActiveSync virtual directory.
RemoteDocumentsActionForUnknownServers	Optional	System.Nullable	This parameter specifies the action that occurs when a Windows SharePoint Services or Windows file share request comes in via Exchange ActiveSync. When a request comes in, Exchange ActiveSync will look for the requested host name in the Allow and Block lists. If the host name is not found in either list, the action specified in this parameter, either Block or Allow, will be performed.
RemoteDocumentsAllowedServers	Optional	Microsoft.Exchange.Data.MultiValuedProperty	This parameter is a multivalued property that lists all the allowed servers for remote document access.
RemoteDocumentsBlockedServers	Optional	Microsoft.Exchange.Data.MultiValuedProperty	This parameter is a multivalued property that lists all the blocked servers for remote document access.
RemoteDocumentsInternalDomainSuffixList	Optional	Microsoft.Exchange.Data.MultiValuedProperty	This parameter is used in organizations that do not run WINS in their network. In these environments, you can specify one or more FQDNs that Exchange ActiveSync treats as internal when a request for remote file access is received.
WhatIf	Optional	System.Management.Automation.SwitchParameter	This parameter instructs the command to simulate the actions that it would take on the object. By using this parameter, you can view what changes would occur without having to apply any of those changes. You do not have to specify a value with this parameter.
WindowsAuthEnabled	Optional	System.Boolean	This parameter specifies whether Integrated Windows authentication is enabled on the Exchange ActiveSync virtual directory.

Detailed Description

The Set-ActiveSyncVirtualDirectory command enables you to configure a variety of settings on the virtual directory that is used for Exchange ActiveSync.

To run the Set-ActiveSyncVirtualDirectory cmdlet, the account you use must be delegated the Exchange Server Administrator role and membership in the local Administrators group for the target server

For more information about permissions, delegating roles, and the rights that are required to administer Microsoft Exchange Server 2007, see Permission Considerations.

Input Types

Return Types

Errors

Error	Description

Exceptions

Exceptions	Description

Example

The following code example disables Basic authentication on the default Exchange ActiveSync virtual directory on the server named Contoso.

	Copy Code
Set-ActiveSyncVirtualDirectory -Identity "contoso\microsoft-server-activesync" -BasicAuthEnabled:$false