Identity

Required

Microsoft.Exchange.Configuration.Tasks.GlobalAddressListIdParameter

Use the Identity parameter to specify the GUID, distinguished name, or global address list (GAL) name that represents a specific GAL. You can also include the path by using the format Path\GlobalAddressListName.

You can omit the parameter label Identity so that only the GAL name or GUID is supplied.

ConditionalCompany

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The ConditionalCompany parameter is used to specify a company. You can use multiple values as a comma-delimited list. You must use the IncludedRecipients parameter if you use a Conditional parameter. You cannot use this parameter if you use the RecipientFilter parameter.

ConditionalCustomAttribute1

Optional

Microsoft.Exchange.Data.MultiValuedProperty

This parameter specifies custom attributes. You can use these attributes to store additional information. You must use the IncludedRecipients parameter if you use a Conditional parameter. You cannot use this parameter if you use the RecipientFilter parameter.

ConditionalCustomAttribute10

Optional

Microsoft.Exchange.Data.MultiValuedProperty

This parameter specifies custom attributes. You can use these attributes to store additional information. You must use the IncludedRecipients parameter if you use a Conditional parameter. You cannot use this parameter if you use the RecipientFilter parameter.

ConditionalCustomAttribute11

Optional

Microsoft.Exchange.Data.MultiValuedProperty

This parameter specifies custom attributes. You can use these attributes to store additional information. You must use the IncludedRecipients parameter if you use a Conditional parameter. You cannot use this parameter if you use the RecipientFilter parameter.

ConditionalCustomAttribute12

Optional

Microsoft.Exchange.Data.MultiValuedProperty

This parameter specifies custom attributes. You can use these attributes to store additional information. You must use the IncludedRecipients parameter if you use a Conditional parameter. You cannot use this parameter if you use the RecipientFilter parameter.

ConditionalCustomAttribute13

Optional

Microsoft.Exchange.Data.MultiValuedProperty

This parameter specifies custom attributes. You can use these attributes to store additional information. You must use the IncludedRecipients parameter if you use a Conditional parameter. You cannot use this parameter if you use the RecipientFilter parameter.

ConditionalCustomAttribute14

Optional

Microsoft.Exchange.Data.MultiValuedProperty

This parameter specifies custom attributes. You can use these attributes to store additional information. You must use the IncludedRecipients parameter if you use a Conditional parameter. You cannot use this parameter if you use the RecipientFilter parameter.

ConditionalCustomAttribute15

Optional

Microsoft.Exchange.Data.MultiValuedProperty

This parameter specifies custom attributes. You can use these attributes to store additional information. You must use the IncludedRecipients parameter if you use a Conditional parameter. You cannot use this parameter if you use the RecipientFilter parameter.

ConditionalCustomAttribute2

Optional

Microsoft.Exchange.Data.MultiValuedProperty

This parameter specifies custom attributes. You can use these attributes to store additional information. You must use the IncludedRecipients parameter if you use a Conditional parameter. You cannot use this parameter if you use the RecipientFilter parameter.

ConditionalCustomAttribute3

Optional

Microsoft.Exchange.Data.MultiValuedProperty

This parameter specifies custom attributes. You can use these attributes to store additional information. You must use the IncludedRecipients parameter if you use a Conditional parameter. You cannot use this parameter if you use the RecipientFilter parameter.

ConditionalCustomAttribute4

Optional

Microsoft.Exchange.Data.MultiValuedProperty

This parameter specifies custom attributes. You can use these attributes to store additional information. You must use the IncludedRecipients parameter if you use a Conditional parameter. You cannot use this parameter if you use the RecipientFilter parameter.

ConditionalCustomAttribute5

Optional

Microsoft.Exchange.Data.MultiValuedProperty

This parameter specifies custom attributes. You can use these attributes to store additional information. You must use the IncludedRecipients parameter if you use a Conditional parameter. You cannot use this parameter if you use the RecipientFilter parameter.

ConditionalCustomAttribute6

Optional

Microsoft.Exchange.Data.MultiValuedProperty

This parameter specifies custom attributes. You can use these attributes to store additional information. You must use the IncludedRecipients parameter if you use a Conditional parameter. You cannot use this parameter if you use the RecipientFilter parameter.

ConditionalCustomAttribute7

Optional

Microsoft.Exchange.Data.MultiValuedProperty

This parameter specifies custom attributes. You can use these attributes to store additional information. You must use the IncludedRecipients parameter if you use a Conditional parameter. You cannot use this parameter if you use the RecipientFilter parameter.

ConditionalCustomAttribute8

Optional

Microsoft.Exchange.Data.MultiValuedProperty

This parameter specifies custom attributes. You can use these attributes to store additional information. You must use the IncludedRecipients parameter if you use a Conditional parameter. You cannot use this parameter if you use the RecipientFilter parameter.

ConditionalCustomAttribute9

Optional

Microsoft.Exchange.Data.MultiValuedProperty

This parameter specifies custom attributes. You can use these attributes to store additional information. You must use the IncludedRecipients parameter if you use a Conditional parameter. You cannot use this parameter if you use the RecipientFilter parameter.

ConditionalDepartment

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The ConditionalDepartment parameter is used to specify a department. All GALs with a department attribute that matches the value that you input for this parameter will be included. You can use multiple values as a comma-delimited list. You must use the IncludedRecipients parameter if you use a Conditional parameter. You cannot use this parameter if you use the RecipientFilter parameter.

ConditionalStateOrProvince

Optional

Microsoft.Exchange.Data.MultiValuedProperty

The ConditionalStateOrProvince parameter sets the state or province for the global address list. It takes multiple values as a comma-delimited list. You must use the IncludedRecipients parameter if you use a Conditional parameter. You cannot use this parameter if you use the RecipientFilter parameter.

Confirm

Optional

System.Management.Automation.SwitchParameter

The Confirm parameter causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm parameter.

DomainController

Optional

Microsoft.Exchange.Data.Fqdn

To specify the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory, include the DomainController parameter in the command.

ForceUpgrade

Optional

System.Management.Automation.SwitchParameter

The ForceUpgrade parameter suppresses the following confirmation: "To save changes on object, the object must be upgraded to the current Exchange version. After upgrade, this object cannot be managed by a previous version of Exchange System Manager. Do you want to continue to upgrade and save the object?" This confirmation occurs when you upgrade a GAL that was created in Microsoft Exchange Server 2003 or Exchange 2000 Server. You cannot manage an Exchange 2003 or Exchange 2000 GAL by using the Exchange Management Console until you update the object's version and change the recipient filter by using either the RecipientFilter, or the IncludedRecipients parameter.

IncludedRecipients

Optional

System.Nullable

The IncludedRecipients parameter filters the recipient types that are used to build the GAL. The available values for the IncludedRecipients parameter are AllRecipients, MailboxUsers, Resources, Contacts, and MailGroups.

The AllRecipients value can be used only by itself. When multiple values of the IncludedRecipients parameter are separated by commas, the OR Boolean operator is applied.

You must use this parameter if you are using the any of the Conditional parameters. You cannot use this parameter if you use the RecipientFilter parameter.

Instance

Optional

Microsoft.Exchange.Data.Directory.Management.GlobalAddressList

The Instance parameter enables you to pass an entire object to the command to be processed. It is mainly used in scripts where an entire object must be passed to the command.

Name

Optional

System.String

The Name parameter specifies the new name for the global address list.

RecipientFilter

Optional

System.String

The RecipientFilter parameter specifies a filter for recipients to include in the GAL. You cannot use this parameter if you use any of the following filter parameters:

• ConditionalCompany
  
  
• ConditionalDepartment
  
  
• IncludedRecipients
  
  
• ConditionalStateorProvince
  
  

You must use either this parameter or one of the previously listed filter parameters.

For more information about the filterable properties, see Filterable Properties for the -RecipientFilter parameter.

UseRusServer

Optional

System.String

Note:
This parameter is available only in Exchange 2007 SP2.

The UseRusServer parameter instructs the command to use the specified Mailbox server on which the Address List service is running to obtain and then set mailbox and Active Directory user attributes.

The Address List service is a component in the Exchange System Attendant service. The Address List service creates and maintains Exchange-specific attribute values in Active Directory. You can use the Address List service to update recipient objects in a domain by using specific information, such as address list membership and e-mail addresses.

WhatIf

Optional

System.Management.Automation.SwitchParameter

The WhatIf parameter instructs the command to simulate the actions that it would take on the object. By using the WhatIf parameter, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf parameter.