Topic Last Modified: 2010-12-21
Before you start the Microsoft Lync Server 2010 communications software deployment process you need to plan for the following:
- The configuration to use for connecting to the public switched
telephone network (PSTN)
- Your strategy for assigning dial-in conferencing regions to
dial-in access numbers
- Your strategy for creating conference directories
Planning for Dial-in PSTN Connectivity
Dial-in conferencing requires at least one Mediation Server and at least one PSTN gateway.
You can deploy a Mediation Server in a central site or in a branch site. In a central site, you can collocate a Mediation Server on a Front End pool or Standard Edition server, or you can deploy it on a stand-alone server or pool. In a branch site, you can deploy a Mediation Server on a stand-alone server or as a component of the Survivable Branch Appliance.
You can deploy a PSTN gateway in a central site or in a branch site. In a branch site, the PSTN gateway can be stand-alone or a component of the Survivable Branch Appliance.
|Dial-in conferencing does not use media bypass because Audio/Video (A/V) Conferencing Servers do not support media bypass.|
For details about planning your configuration for Mediation Servers and PSTN gateways for dial-in conferencing, see Components and Topologies for Mediation Server in the Planning documentation.
Planning for Dial-in Conferencing Regions
During dial-in configuration, you create dial plans and dial-in conferencing access numbers. Dial plans are sets of normalization rules that specify the number and pattern of digits in a phone number and translate the phone number into the standard E.164 format for call routing. Dial-in conferencing access numbers are the numbers participants call to join a conference.
Every dial-in conferencing access number must be associated with at least one dial plan. Dial-in conferencing regions associate a dial-in conferencing access number with its dial plans. When you set up a dial plan, you specify the dial-in conferencing region that applies to the dial plan. Then when you create the dial-in access number, you select the regions that associate the access number with the appropriate dial plans.
When you create a dial plan, you specify the scope of the dial plan: user scope, pool scope, or site scope. Every user is assigned the dial plan from the narrowest scope that applies to the user. For example, a user is assigned a user-level dial plan, if one applies. If a user-level dial plan does not apply, the user is assigned a pool-level dial plan. If a pool-level dial plan does not apply, the user is assigned a site-level dial plan. If a site-level dial plan does not apply, the user is assigned the global dial plan.
Before you configure the dial plans, is it important to plan how you want to name and use regions. The following considerations apply to dial-in conferencing regions:
- A region is typically a geographical area that is associated
with an office or group of offices.
- Languages are associated with dial-in access numbers. If you
support geographical areas that have multiple languages, you should
decide how you want to define regions to support the multiple
languages. For example, you might define multiple regions based on
a combination of geography and language, or you might define a
single region based on geography and have a different dial-in
access numbers for each language.
- When a user schedules a meeting, by default the meeting uses
the region specified by that user's dial plan.
- By default, the all of the dial-in access numbers for the
region are included in the meeting invitation.
- It is important to name regions so that they are clearly
recognizable. The user can use the names of the regions to change a
meeting's region so that different access numbers are included in
the invitation. (When using Microsoft Outlook to schedule a
meeting, the user uses the Online Meeting Add-in for Microsoft Lync
2010 to change the region).
- Regions should be designed so that any invitee who wants to
dial into a conference can see a local access number in the
- You can configure the order in which access numbers within a
region appear on the Dial-in Conferencing Settings webpage (and,
therefore, the order in which they appear in the conference
invitation) by using Lync Server Management Shell cmdlets.
- Any user from any location can call any dial-in access number
to join a conference.
Planning for Conference Directories
Conference directories maintain a mapping between the alphanumeric meeting ID that a participant uses to join a conference when using Microsoft Lync 2010, and the numeric-only conference ID that a dial-in conferencing participant uses to join the conference. The format of the conference ID is as follows:
<housekeeping digit (1 digit)><conference directory (usually 1-2 digits)><conference number (variable number of digits><check digit (1 digit)>
The more conference directories that you configure for a pool, the shorter each conference ID will be. Shorter conference IDs improve usability for your dial-in users. We recommend that you create enough conference directories in each of your pools to keep most conference IDs at six digits. To maintain conference IDs of about six digits, in an organization with a typical number of conferences per user, we recommend that you create one conference directory for every 999 users in the pool.