Topic Last Modified: 2010-11-04

Modifies an existing device in the collection of analog devices that can be managed by using Microsoft Lync Server 2010. An analog device is a telephone or other device that is connected to the public switched telephone network (PSTN).

Syntax

Set-CsAnalogDevice -Identity <UserIdParameter> [-AnalogFax <$true | $false>] [-Confirm [<SwitchParameter>]] [-DisplayName <String>] [-DisplayNumber <String>] [-DomainController <Fqdn>] [-Enabled <$true | $false>] [-EnterpriseVoiceEnabled <$true | $false>] [-Gateway <Fqdn>] [-LineURI <String>] [-PassThru <SwitchParameter>] [-SipAddress <String>] [-WhatIf [<SwitchParameter>]]

Parameters

Parameter Required Type Description

Identity

Required

User ID parameter

Unique identifier for the analog device being modified. Analog devices are identified by using the Active Directory distinguished name (DN) of the associated contact object. By default, analog devices use a GUID (globally unique identifier) as their common name, which means devices will typically have an Identity similar to this: CN={ce84964a-c4da-4622-ad34-c54ff3ed361f},OU=Redmond,DC=Litwareinc,DC=com. This means you might find it easier to modify analog devices by using the Get-CsAnalogDevice cmdlet to return the analog devices objects and then piping those objects to Set-CsAnalogDevice.

Gateway

Optional

String

IP address of the PSTN gateway to be used by the analog device.

AnalogFax

Optional

Boolean

Set to True ($True) if the analog device is a fax machine. Set to False ($False) if the device is not a fax machine.

LineURI

Optional

String

Phone number for the analog device. The line URI should be specified by using the E.164 format, and be prefixed by the "TEL:" prefix. For example: TEL:+14255551297. Any extension number should be added to the end of the line URI; for example: TEL:+14255551297;ext=51297.

SipAddress

Optional

SIP address

Unique identifier that allows the analog device to communicate with SIP devices such as Microsoft Lync 2010. The SIP address must be prefaced by the prefix "sip:". For example: sip:bldg14lobby@litwareinc.com.

DisplayName

Optional

String

Configures the Active Directory display name of the analog device.

DisplayNumber

Optional

String

Phone number as displayed in Lync 2010. The DisplayNumber property can be formatted any way you prefer; for example 1-800-555-1234; 1-(800)-555-1234; 1.800.555.1234; etc.

DomainController

Optional

Switch Parameter

Enables you to connect to the specified domain controller in order to modify contact information. To connect to a particular domain controller, include the DomainController parameter followed by the computer name (for example, atl-mcs-001) or its fully qualified domain name (FQDN) (for example, atl-mcs-001.litwareinc.com).

EnterpriseVoiceEnabled

Optional

Boolean

Indicates whether the contact object for the analog device has been enabled for Enterprise Voice, the VoIP solution offered by Microsoft. With Enterprise Voice, telephone calls can be made using the Internet rather than using the standard telephone network.

PassThru

Optional

Switch Parameter

Returns an object representing the common area phone.

WhatIf

Switch Parameter

Describes what would happen if you executed the command without actually executing the command.

Confirm

Optional

Switch Parameter

Prompts you for confirmation before executing the command.

Detailed Description

Analog devices include telephones, fax machines, modems, and teletype/telecommunication device for the deaf (TTY/TDD) devices that are connected to the public switched telephone network (PSTN). Unlike devices that take advantage of Enterprise Voice (that is, the Voice over Internet Protocol (VoIP) solution offered by Microsoft), analog devices do not transmit information by using digital packets. Instead, information is transmitted by using a continuous signal. This signal is commonly referred to as an analog signal; hence the term "analog devices."

In order to enable administrators to manage analog devices, Lync Server 2010 lets you associate analog devices with Active Directory contact objects. After a device has been associated with a contact object, you can then manage the analog device by assigning policies and dial plans to the contact.

The Set-CsAnalogDevice cmdlet provides a way for you to modify the properties of the contact objects associated with analog devices. For example, you can change the contact’s Active Directory display name or the line Uniform Resource Identifier (URI) associated with the device.

Who can run this cmdlet: By default, members of the following groups are authorized to run the Set-CsAnalogDevice cmdlet locally: RTCUniversalUserAdmins. Permissions to run this cmdlet for specific sites or specific Active Directory organizational (OUs) can be assigned by using the Grant-CsOUPermission cmdlet. To return a list of all the role-based access control (RBAC) roles this cmdlet has been assigned to (including any custom RBAC roles you have created yourself), run the following command from the Windows PowerShell prompt:

Get-CsAdminRole | Where-Object {$_.Cmdlets –match "Set-CsAnalogDevice"}

Input Types

Microsoft.Rtc.Management.ADConnect.Schema.OCSADAnalogDeviceContact object. Set-CsAnalogDevice accepts pipelined instances of the analog device object.

Return Types

By default, Set-CsAnalogDevice does not return any objects or values. However, if you include the PassThru parameter, the cmdlet will return instances of the Microsoft.Rtc.Management.ADConnect.Schema.OCSADAnalogDeviceContact object.

Example

-------------------------- Example 1 ------------------------

Copy Code
Set-CsAnalogDevice -Identity "CN={ce84964a-c4da-4622-ad34-c54ff3ed361f},OU=Redmond,DC=Litwareinc,DC=com" -LineUri "TEL:+14255551298"

The preceding command changes the value of the LineUri property for the analog device that has the Identity CN={ce84964a-c4da-4622-ad34-c54ff3ed361f},OU=Redmond,DC=Litwareinc,DC=com.

-------------------------- Example 2 ------------------------

Copy Code
Get-CsAnalogDevice -Filter {Gateway -eq "192.168.0.240"} | Set-CsAnalogDevice -Gateway "192.168.1.100"

The command shown in Example 2 changes the gateway for each analog device currently using the gateway 192.168.0.240. To perform this task, Get-CsAnalogDevice is called along with the Filter parameter; the filter value {Gateway -eq "192.168.0.240"} ensures that only devices with a Gateway equal to (-eq) 192.168.0.240 are returned. This filtered collection is then piped to Set-CsAnalogDevice, which takes each item in the collection and changes the value of the Gateway property to 192.168.1.100.

See Also