Syntax


Set-CsVoicePolicy [-Identity <XdsIdentity>] [-AllowCallForwarding <$true \| $false>] [-AllowPSTNReRouting <$true \| $false>] [-AllowSimulRing <$true \| $false>] [-Confirm [<SwitchParameter>]] [-Description <String>] [-EnableBWPolicyOverride <$true \| $false>] [-EnableCallPark <$true \| $false>] [-EnableCallTransfer <$true \| $false>] [-EnableDelegation <$true \| $false>] [-EnableMaliciousCallTracing <$true \| $false>] [-EnableTeamCall <$true \| $false>] [-Force <SwitchParameter>] [-Name <String>] [-PreventPSTNTollBypass <$true \| $false>] [-PstnUsages <PSListModifier>] [-WhatIf [<SwitchParameter>]]

Set-CsVoicePolicy [-Identity <XdsIdentity>]
[-AllowCallForwarding <$true | $false>] [-AllowPSTNReRouting
<$true | $false>] [-AllowSimulRing <$true | $false>]
[-Confirm [<SwitchParameter>]] [-Description <String>]
[-EnableBWPolicyOverride <$true | $false>] [-EnableCallPark
<$true | $false>] [-EnableCallTransfer <$true |
$false>] [-EnableDelegation <$true | $false>]
[-EnableMaliciousCallTracing <$true | $false>]
[-EnableTeamCall <$true | $false>] [-Force
<SwitchParameter>] [-Name <String>]
[-PreventPSTNTollBypass <$true | $false>] [-PstnUsages
<PSListModifier>] [-WhatIf [<SwitchParameter>]]


Set-CsVoicePolicy [-AllowCallForwarding <$true \| $false>] [-AllowPSTNReRouting <$true \| $false>] [-AllowSimulRing <$true \| $false>] [-Confirm [<SwitchParameter>]] [-Description <String>] [-EnableBWPolicyOverride <$true \| $false>] [-EnableCallPark <$true \| $false>] [-EnableCallTransfer <$true \| $false>] [-EnableDelegation <$true \| $false>] [-EnableMaliciousCallTracing <$true \| $false>] [-EnableTeamCall <$true \| $false>] [-Force <SwitchParameter>] [-Instance <PSObject>] [-Name <String>] [-PreventPSTNTollBypass <$true \| $false>] [-PstnUsages <PSListModifier>] [-WhatIf [<SwitchParameter>]]

Set-CsVoicePolicy [-AllowCallForwarding <$true |
$false>] [-AllowPSTNReRouting <$true | $false>]
[-AllowSimulRing <$true | $false>] [-Confirm
[<SwitchParameter>]] [-Description <String>]
[-EnableBWPolicyOverride <$true | $false>] [-EnableCallPark
<$true | $false>] [-EnableCallTransfer <$true |
$false>] [-EnableDelegation <$true | $false>]
[-EnableMaliciousCallTracing <$true | $false>]
[-EnableTeamCall <$true | $false>] [-Force
<SwitchParameter>] [-Instance <PSObject>] [-Name
<String>] [-PreventPSTNTollBypass <$true | $false>]
[-PstnUsages <PSListModifier>] [-WhatIf
[<SwitchParameter>]]

Parameters

Parameter	Required	Type	Description
Identity	Optional	String	A unique identifier specifying the scope, and in some cases the name, of the policy.
Instance	Optional	VoicePolicy	Allows you to pass a reference to an object to the cmdlet rather than set individual parameter values. This object must be of type VoicePolicy and can be retrieved by calling the Get-CsVoicePolicy cmdlet.
AllowCallForwarding	Optional	Boolean	If this parameter is set to True, users assigned to this policy can forward calls. If this parameter is set to False, calls cannot be forwarded.
AllowPSTNReRouting	Optional	Boolean	When this parameter is set to True, calls made to internal numbers homed on another pool will be routed through the public switched telephone network (PSTN) when the pool or WAN is unavailable.
AllowSimulRing	Optional	Boolean	Simultaneous ring is a feature that allows multiple phones to ring when a single number is dialed. Setting this parameter to True enables simultaneous ring. If this parameter is set to False, simultaneous ring cannot be configured for any user assigned to this policy.
Description	Optional	String	A description of the voice policy. Maximum length: 1040 characters.
EnableBWPolicyOverride	Optional	Boolean	Policies can be set to limit bandwidth and set various other properties relating to network configuration. Setting this parameter to True will allow override of these policies. In other words, if this parameter is set to True no bandwidth checks will be made, calls will go through regardless of the call admission control (CAC) settings.
EnableCallPark	Optional	Boolean	The Call Park application allows a call to be held, or parked, at a certain number within a range of numbers for later retrieval. Setting this parameter to True enables this application for users assigned this policy. If this parameter is set to False, users assigned to this policy cannot park calls that have been dialed to their phone number.
EnableCallTransfer	Optional	Boolean	Determines whether calls can be transferred to another number. If this parameter is set to True, calls can be transferred; if the parameter is set to False, calls cannot be transferred.
EnableDelegation	Optional	Boolean	Call delegation allows a user to answer calls for another user or make calls on the other user’s behalf. For example, a manager can set up call delegation so that all incoming calls ring both his or her phone and the phone of an administrator. Setting this parameter to True allows users with this policy to set up call delegation. Setting this parameter to False disables call delegation.
EnableMaliciousCallTracing	Optional	Boolean	Malicious call tracing is a standard that is in place to trace calls that a user designates as malicious. These calls can be traced even if caller ID is blocked. The trace is available only to the proper authorities and not to the user. Setting this property to True enables the ability to set a trace on malicious calls.
EnableTeamCall	Optional	Boolean	Team Call allows a user to designate a group of other users whose phones will ring when that user’s number is called. This feature is useful in teams where, for example, anyone from a team can answer incoming calls from customers. Setting this parameter to True enables this feature.
Name	Optional	String	A friendly name describing this policy.
PreventPSTNTollBypass	Optional	Boolean	PSTN tolls are more commonly known as long-distance charges. Organizations can sometimes bypass these tolls by implementing a Voice over Internet Protocol (VoIP) solution that enables branch offices to connect via network calls. Setting this parameter to True will send calls through PSTN and incur charges rather than going through the network and bypassing the tolls.
PstnUsages	Optional	PSListModifier	A list of PSTN usages available to this policy. The PSTN usage ties a voice policy to a phone route. Any string value can be placed into this list, as long as the value exists in the current global list of PSTN usages. (Duplicate strings are not allowed; all string must be unique.) The list of PSTN usages can be retrieved by calling the Get-CsPstnUsage cmdlet. Keep in mind that if you use this parameter to remove all PSTN usages from the policy, users granted this policy will not be able to make outbound PSTN calls.
Force	Optional	SwitchParameter	Suppresses any confirmation prompts that would otherwise be displayed before making changes.
WhatIf	Optional	SwitchParameter	Describes what would happen if you executed the command without actually executing the command.
Confirm	Optional	SwitchParameter	Prompts you for confirmation before executing the command.

Detailed Description

This cmdlet modifies an existing voice policy. Voice policies are used to manage such Enterprise Voice-related features as simultaneous ringing (the ability to have a second phone ring each time someone calls your office phone) and call forwarding. Use this cmdlet to change the settings that enable and disable many of these features.

Who can run this cmdlet: By default, members of the following groups are authorized to run the Set-CsVoicePolicy cmdlet locally: RTCUniversalServerAdmins. To return a list of all the role-based access control (RBAC) roles this cmdlet has been assigned to (including any custom RBAC roles you have created yourself), run the following command from the Windows PowerShell prompt:

Get-CsAdminRole | Where-Object {$_.Cmdlets –match "Set-CsVoicePolicy"}

Input Types

Microsoft.Rtc.Management.WritableConfig.Policy.Voice.VoicePolicy object. Accepts pipelined input of voice policy objects.

Return Types

This cmdlet does not return a value or object. Instead, it configures instances of the Microsoft.Rtc.Management.WritableConfig.Voice.VoicePolicy object.

Example

-------------------------- Example 1 --------------------------

	Copy Code
Set-CsVoicePolicy UserVoicePolicy2 -AllowSimulRing $false -PstnUsages @{remove="Local"}

This example sets the AllowSimulRing property to False for the per-user policy UserVoicePolicy2, meaning any users assigned this policy are not enabled for simultaneous ring, a feature that determines whether a second phone (such as a mobile phone) can be set to ring every time the user’s office phone rings. This command also removes "Local" from the list of PSTN usages for this policy. (Note that the Identity parameter is not explicitly specified. The Identity parameter is a positional parameter, therefore if you put the identity value first in the list of parameters you don’t need to explicitly state that it’s the Identity.)

-------------------------- Example 2 --------------------------

	Copy Code
$a = Get-CsPstnUsage Set-CsVoicePolicy -Identity site:Redmond -PstnUsages @{replace=$a.Usage}

This example modifies the voice policy for site Redmond so that all the PSTN usages defined for the organization are applied to this policy. The first line in this example calls the Get-CsPstnUsage cmdlet to retrieve the global set of PSTN usages for the organization and save that set in the variable $a. The second line calls Set-CsVoicePolicy to modify the voice policy for site Redmond. A value is passed to the PstnUsages parameter to replace the current list of usages for the policy with the list contained in the global set of PSTN usages. Note the syntax of the replace value: $a.Usage. This refers to the Usage property of the PSTN usage settings, which contains the list of PSTN usages.