Topic Last Modified: 2014-03-20

If you want to use automatic discovery for mobile device clients, you need to modify an existing or create a new web publishing rule for the reverse proxy whether or not you update the subject alternative name lists on the reverse proxy certificates.

If you decide to use HTTPS for initial Lync Server 2013 Autodiscover Service requests and update the subject alternative names lists on the reverse proxy certificates, you need to assign the updated public certificate to the Secure Sockets Layer (SSL) Listener on your reverse proxy. For details about the required subject alternative name entries, see Technical Requirements for Mobility. You then need to modify the existing listener for the external web services or create a new web publishing rule for the external Autodiscover Service URL. If you do not already have a web publishing rule for the external Lync Server 2013 Web Services URL for your Front End pool, you also need to publish a rule for that.

Note:
The reverse proxy publishing rule and listener can service both the external web services and the Autodiscover Service, as long as the certificate assigned to the listener contains the necessary subject name and subject alternative names for both. For details on the default configuration of the web listener and publishing rule, see Setting Up Reverse Proxy Servers for more details.

If you decide to use HTTP for initial Autodiscover Service requests so that you do not need to update subject alternative names for the reverse proxy, you need to create or modify a web publishing rule for port 80.

The procedures in this section describe how to create or modify the web publishing rules in Microsoft Forefront Threat Management Gateway 2010 for automatic discovery.

Note:
These procedures assume that you have installed the Standard Edition of Forefront Threat Management Gateway (TMG) 2010. If you are using another reverse proxy, the procedures are similar, but will need to be mapped to the documentation for the third-party product.

To create a web publishing rule for the external Autodiscover URL

  1. Click Start, point to Programs, point to Microsoft Forefront TMG, and then click Forefront TMG Management.

  2. In the left pane, expand ServerName, right-click Firewall Policy, point to New, and then click Web Site Publishing Rule.

  3. On the Welcome to the New Web Publishing Rule page, type a display name for the new publishing rule (for example, LyncDiscoveryURL).

  4. On the Select Rule Action page, select Allow.

  5. On the Publishing Type page, select Publish a single Web site or load balancer.

  6. On the Server Connection Security page, select Use SSL to connect to the published Web server or server farm.

  7. On the Internal Publishing Details page, in Internal Site name, type the fully qualified domain name (FQDN) of your Director pool (for example, lyncdir01.contoso.local). If you are creating a rule for the external Web Services URL on the Front End pool, type the VIP address of the Hardware Load Balancer (HLB) in front of the Front End pool.

  8. On the Internal Publishing Details page, in Path (optional), type /* as the path of the folder to be published, and then select Forward the original host header.

  9. On the Public Name Details page, do the following:

    • Under Accept Requests for, select This domain name.

    • In Public Name, type lyncdiscover.<sipdomain> (the external Autodiscover Service URL). If you are creating a rule for the external Web Services URL on the Front End pool, type the FQDN for the external Web Services on your Front End pool (for example, lyncwebextpool01.contoso.com).

    • In Path, type /*.

  10. On Select Web Listener page, in Web Listener, select your existing SSL Listener with the updated public certificate.

  11. On the Authentication Delegation page, select No delegation, but client may authenticate directly.

  12. On the User Set page, select All Users.

  13. On the Completing the New Web Publishing Rule Wizard page, verify that the web publishing rule settings are correct, and then click Finish.

  14. In the Forefront TMG list of web publishing rules, double-click the new rule you just added to open Properties.

  15. On the To tab, do the following:

    • Select Forward the original host header instead of the actual one.

    • Select Requests appear to come from the Forefront TMG computer.

  16. On the Bridging tab, configure the following:

    • Select Web server.

    • Select Redirect requests to HTTP port, and type 8080 for the port number.

    • Select Redirect requests to SSL port, and type 4443 for the port number.

  17. Click OK.

  18. Click Apply in the details pane to save the changes and update the configuration.

  19. Click Test Rule to verify that your new rule is set up correctly.

To modify an existing web publishing rule to add the external Autodiscover SAN and URL

  1. Click Start, point to Programs, point to Microsoft Forefront TMG, and then click Forefront TMG Management.

    Important:
    You will repeat the modification for each publishing rule and listener that you have. Typically, this will be one rule and listener for the Front End pools and one for the optional Directors or Director pools, if you have deployed them.

  2. In the left pane, expand ServerName, right-click Firewall Policy, click the applicable rule. On the Tasks tab, click Edit Selected rule.

  3. On the Public Name tab, in This rule applies to, select Requests for the following Web sites.

  4. Click Add, type the name of the new Autodiscover site (for example, “lyncdiscover.contoso.com”), and then click OK.

  5. On the Listener tab, click Select Certificate and assign the new certificate with the added Autodiscover SAN entries. Close the Listener and Web Publishing properties.

  6. Click Apply in the details pane to save the changes and update the configuration.

  7. Click Test Rule to verify that your new rule is set up correctly.

To create a web publishing rule for port 80

  1. Click Start, point to Programs, point to Microsoft Forefront TMG, and then click Forefront TMG Management.

  2. In the left pane, expand ServerName, right-click Firewall Policy, point to New, and then click Web Site Publishing Rule.

  3. On the Welcome to the New Web Publishing Rule page, type a display name for the new publishing rule (for example, Lync Autodiscover (HTTP)).

  4. On the Select Rule Action page, select Allow.

  5. On the Publishing Type page, select Publish a single Web site or load balancer.

  6. On the Server Connection Security page, select Use non-secured connections to connect to the published Web server or server farm.

  7. On the Internal Publishing Details page, in Internal Site name, type the VIP address of the Hardware Load Balancer (HLB) in front of the Front End pool.

  8. On the Internal Publishing Details page, in Path (optional), type /* as the path of the folder to be published, and then select Forward the original host header instead of the one specified in the Internal site name field.

  9. On the Public Name Details page, do the following:

    • Under Accept Requests for, select This domain name.

    • In Public Name, type lyncdiscover.<sipdomain> (the external Autodiscover Service URL).

    • In Path, type /*.

  10. On Select Web Listener page, in Web Listener, select a Web Listener or use the New Web Listener Definition Wizard to create a new one.

  11. On the Authentication Delegation page, select No delegation, and client cannot authenticate directly.

  12. On the User Set page, select All Users.

  13. On the Completing the New Web Publishing Rule Wizard page, verify that the web publishing rule settings are correct, and then click Finish.

  14. In the Forefront TMG list of web publishing rules, double-click the new rule you just added to open Properties.

  15. On the Bridging tab, configure the following:

    • Select Web server.

    • Select Redirect requests to HTTP port, and type 8080 for the port number.

    • Verify that Redirect requests to SSL port is not selected.

  16. Click OK.

  17. Click Apply in the details pane to save the changes and update the configuration.

  18. Click Test Rule to verify that your new rule is set up correctly.

  19. Verify that the external Autodiscover Service URL is not defined on any other web publishing rule.

See Also