Topic Last Modified: 2014-01-08

To be able to deploy SQL mirroring, your servers must run a minimum of SQL Server 2008 R2. This version must run on all the involved servers: the primary, mirror, and the witness. For details, see http://go.microsoft.com/fwlink/p/?linkid=3052&kbid=2083921.

In general, setting up SQL mirroring between the two Back End Servers with a witness requires the following:

For SQL best practices in terms of what SQL versions are supported for a Witness role, see "Database Mirroring Witness" in the MSDN Library at http://go.microsoft.com/fwlink/p/?LinkId=247345.

You use Topology Builder to deploy SQL mirroring. You select an option in Topology Builder to mirror the databases, and Topology Builder sets up the mirroring (including setting up a witness, if you want) when you publish the topology. Note that you set up or remove the witness at the same time you set up or remove the mirror. There is no separate command to deploy or remove only a witness.

To configure server mirroring, you must first set up SQL database permissions correctly. For details, see "Set Up Login Accounts for Database Mirroring or AlwaysOn Availability Groups (SQL Server)" at http://go.microsoft.com/fwlink/p/?LinkId=268454.

With SQL mirroring, database recovery mode is always set to Full, which means you must closely monitor transaction log size and back up transaction logs on a regular basis to avoid running out of disk space on the Back End Servers. The frequency of transaction log backups depends on the log growth rate, which in turn depends on database transactions incurred by user activities on the Front End pool. We recommend that you determine how much transaction log growth is expected for your Lync deployment workload so that you can do the planning accordingly. The following articles provide additional information on SQL backup and log management:

With SQL mirroring, you can either configure the topology for mirroring when you create the pools, or after the pools are already created.

Important:
Using Topology Builder or cmdlets to set up and remove SQL mirroring is supported only when the primary, mirror, and witness (if desired) servers all belong to the same domain. If you want to set up SQL mirroring among servers in different domains, see your SQL Server documentation.
Important:
Whenever you make a change to a Back End Database mirroring relationship, you must restart all the Front End Servers in the pool.

For a change in mirroring, (such as changing the location of a mirror), you must use Topology Builder to perform these three steps:

  1. Remove mirroring from the old mirror server.

  2. Add mirroring to the new mirror server.

  3. Publish the topology.
Note:
A file share has to be created for the mirror files to be written to, and the service that SQL Server and SQL Agent are running under needs read/write access. If the SQL Server service is running under the context of Network Service, you can add <Domain>\<SQLSERVERNAME>$ of both the Principal and Mirror SQL Servers to the share permissions. The $ is important to identify that this is a computer account.

To configure SQL mirroring while creating a pool in Topology Builder

  1. On the Define the SQL Store page, click New next to the SQL store box.

  2. On the Define new SQL Store page, specify the primary store, select This SQL instance is in mirroring relation, specify the SQL mirroring port number (the default is 5022), and then click OK.

  3. Back on the Define the SQL store page, select Enable SQL Store mirroring.

  4. In the Define new SQL Store page, specify the SQL store to be used as the mirror. Select This SQL instance is in mirroring relation, specify the port number (the default is 5022), and then click OK.

  5. If you want a witness for this mirror, do the following:

    1. Select Use SQL mirroring witness to enable automatic failover.

    2. In the Define the SQL Store page, select Use SQL mirroring witness to enable automatic failover, and specify the SQL store to be used as the witness.

    3. Specify the port number (the default is 7022) and click OK.

  6. After you are done defining your Front End pool and all other roles in your topology, use Topology Builder to publish the topology. When the topology is published, if the Front End pool that hosts Central Management store has SQL mirroring enabled, you will see an option to create both primary and mirror SQL store databases.

    Click Settings, and type the path to use as the file share for the mirroring backup.

    Click OK and then Next to create the databases and publish the topology. The mirroring and the witness (if specified) will be deployed.

You can use Topology Builder to edit the properties of an already existing pool to enable SQL mirroring.

To add SQL mirroring to an existing Front End pool in Topology Builder

  1. In Topology Builder, right-click the pool and then click Edit Properties.

  2. Select Enable SQL Store Mirroring, and then click New next to Mirroring SQL Store.

  3. Specify the SQL store that you want to use as the mirror.

  4. Select This SQL instance is in mirroring relation, specify the SQL mirroring port number the default port is 5022), and then click OK.

  5. If you want to configure a witness, select Use SQL mirroring witness to enable automatic failover, and click New.

  6. Specify the SQL store that you want to use as the witness.

  7. Select This SQL instance is in mirroring relation, specify the SQL mirroring port number (the default port is 7022), and then click OK.

  8. Click OK.

  9. Publish the topology. When you do so, you will be prompted to install the database.

    During the topology publishing process, you will be asked to define a file share path. The SQL Servers that participate in the mirroring must have read/write access to this file share for the mirror to be established.

You must then install the database before going on to the next procedure.

You should keep the following in mind when setting up SQL mirroring:

  • If a mirroring endpoint already exists, it will be reused using the ports defined there, and will ignore the ones you specify in the topology.

  • Any port already allocated for other applications on the same server, including those for other SQL instances, should not be used for the installed SQL instances at hand. This implies that if you have more than one SQL instance installed on the same server, they must not use the same port for mirroring. For details, see the following articles:

Using Lync Server Management Shell Cmdlets to Set Up SQL Mirroring

The easiest way to set up mirroring is by using Topology Builder, but you can also do so using cmdlets.

  1. Open a Lync Server Management Shell window and run the following cmdlet:

    Copy Code 
    Install-CsMirrorDatabase [-ConfiguredDatabases] [-ForInstance] [-ForDefaultInstance] [-DatabaseType <Application | Archiving | CentralMgmt | Monitoring | User | BIStaging | PersistentChat | PersistentChatCompliance >] -FileShare <fileshare> -SqlServerFqdn <primarySqlserverFqdn> [-SqlInstanceName] [-DatabasePathMap] [-ExcludeDatabaseList] [-DropExistingDatabasesOnMirror] -Verbose

    For example:

    Copy Code 
    Install-CsMirrorDatabase -ConfiguredDatabases -FileShare \\PRIMARYBE\csdatabackup -SqlServerFqdn primaryBE.contoso.com -DropExistingDatabasesOnMirror -Verbose

    You will see the following:

    Copy Code 
    Database Name:rtcxds 
		Data File:D:\CsData\BackendStore\rtc\DbPath\rtcxds.mdf 
		 Log File:D:\CsData\BackendStore\rtc\LogPath\rtcxds.ldf 
	Primary SQL: e04-ocs.los_a.lsipt.local\rtc 
		Account: LOS_A\e04-ocs$ 
	 Mirror SQL: K16-ocs.los_a.lsipt.local\rtc 
		Account: LOS_A\K16-ocs$ 
	 Witness SQL : AB14-lct.los_a.lsipt.local\rtc 
		Account: LOS_A\AB14-lct$ 
	Database Name:rtcshared 
		Data File:D:\CsData\BackendStore\rtc\DbPath\rtcshared.mdf 
		 Log File:D:\CsData\BackendStore\rtc\LogPath\rtcshared.ldf 
	Primary SQL: e04-ocs.los_a.lsipt.local\rtc 
		Account: LOS_A\e04-ocs$ 
	 Mirror SQL: K16-ocs.los_a.lsipt.local\rtc 
		Account: LOS_A\K16-ocs$ 
	 Witness SQL : AB14-lct.los_a.lsipt.local\rtc 
		Account: LOS_A\AB14-lct$ 
	Database Name:rtcab 
		Data File:D:\CsData\ABSStore\rtc\DbPath\rtcab.mdf 
		 Log File:D:\CsData\ABSStore\rtc\LogPath\rtcab.ldf 
	Primary SQL: e04-ocs.los_a.lsipt.local\rtc 
		Account: LOS_A\e04-ocs$ 
	 Mirror SQL: K16-ocs.los_a.lsipt.local\rtc 
		Account: LOS_A\K16-ocs$ 
	 Witness SQL : AB14-lct.los_a.lsipt.local\rtc 
		Account: LOS_A\AB14-lct$ 
	Database Name:rgsconfig 
		Data File:D:\CsData\ApplicationStore\rtc\DbPath\rgsconfig.mdf 
		 Log File:D:\CsData\ApplicationStore\rtc\LogPath\rgsconfig.ldf 
	Primary SQL: e04-ocs.los_a.lsipt.local\rtc 
		Account: LOS_A\e04-ocs$ 
	 Mirror SQL: K16-ocs.los_a.lsipt.local\rtc 
		Account: LOS_A\K16-ocs$ 
	 Witness SQL : AB14-lct.los_a.lsipt.local\rtc 
		Account: LOS_A\AB14-lct$ 
	Database Name:rgsdyn 
		Data File:D:\CsData\ApplicationStore\rtc\DbPath\rgsdyn.mdf 
		 Log File:D:\CsData\ApplicationStore\rtc\LogPath\rgsdyn.ldf 
	Primary SQL: e04-ocs.los_a.lsipt.local\rtc 
		Account: LOS_A\e04-ocs$ 
	 Mirror SQL: K16-ocs.los_a.lsipt.local\rtc 
		Account: LOS_A\K16-ocs$ 
	 Witness SQL : AB14-lct.los_a.lsipt.local\rtc 
		Account: LOS_A\AB14-lct$ 
	Database Name:cpsdyn 
		Data File:D:\CsData\ApplicationStore\rtc\DbPath\cpsdyn.mdf 
		 Log File:D:\CsData\ApplicationStore\rtc\LogPath\cpsdyn.ldf 
	Primary SQL: e04-ocs.los_a.lsipt.local\rtc 
		Account: LOS_A\e04-ocs$ 
	 Mirror SQL: K16-ocs.los_a.lsipt.local\rtc 
		Account: LOS_A\K16-ocs$ 
	 Witness SQL : AB14-lct.los_a.lsipt.local\rtc 
		Account: LOS_A\AB14-lct$ 
	Database Name:xds 
		Data File:D:\CsData\CentralMgmtStore\rtc\DbPath\xds.mdf 
		 Log File:D:\CsData\CentralMgmtStore\rtc\LogPath\xds.ldf 
	Primary SQL: e04-ocs.los_a.lsipt.local\rtc 
		Account: LOS_A\e04-ocs$ 
	 Mirror SQL: K16-ocs.los_a.lsipt.local\rtc 
		Account: LOS_A\K16-ocs$ 
	 Witness SQL : AB14-lct.los_a.lsipt.local\rtc 
		Account: LOS_A\AB14-lct$ 
	Database Name:lis 
		Data File:D:\CsData\CentralMgmtStore\rtc\DbPath\lis.mdf 
		 Log File:D:\CsData\CentralMgmtStore\rtc\LogPath\lis.ldf 
	Primary SQL: e04-ocs.los_a.lsipt.local\rtc 
		Account: LOS_A\e04-ocs$ 
	 Mirror SQL: K16-ocs.los_a.lsipt.local\rtc 
		Account: LOS_A\K16-ocs$ 
	 Witness SQL : AB14-lct.los_a.lsipt.local\rtc 
		Account: LOS_A\AB14-lct$
[Y] Yes  [A] Yes to All  [N] No  [L] No to All  [S] Suspend  [?] Help (default is "Y"):

  2. Verify the following:

    • Port 5022 is accessible through the firewall if Windows Firewall is enabled in the primary SQL Server e04-ocs.los_a.lsipt.local\rtc.

    • Port 5022 is accessible through the firewall if Windows Firewall is enabled in the mirror SQL Server K16-ocs.los_a.lsipt.local\rtc.

    • Port 7022 is accessible through the firewall if Windows Firewall is enabled in the witness SQL Server AB14-lct.los_a.lsipt.local\rtc.

    • Accounts running the SQL Servers on all primary and mirror SQL servers have read/write permission to the file share \\E04-OCS\csdatabackup

    • Verify that the Windows Management Instrumentation (WMI) provider is running on all these servers. The cmdlet uses this provider to find the account information for SQL Server services running on all primary, mirror and witness servers.

    • Verify that the account running this cmdlet has permission to create the folders for the data and log files for all the mirror servers.

    • Note that the user account that the SQL instance uses to run must have read/write permission to the file share. If the file share is on a different server, and the SQL instance runs a local system account, you must grant file share permissions to the server that hosts the SQL instance.

  3. Type A and press ENTER.

    The mirroring will be configured.

Install-CsMirrorDatabase installs the mirror and configures mirroring for all the databases that are present on the primary SQL store. If you want to configure mirroring for only specific databases, you can use the –DatabaseType option, or if you want to configure mirroring for all databases except for a few, you can use the -ExcludeDatabaseList option, along with a comma-separated list of database names to exclude.

For example, if you add the following option to Install-CsMirrorDatabase, all databases except rtcab and rtcxds will be mirrored.

-ExcludeDatabaseList rtcab,rtcxds

For example, if you add the following option to Install-CsMirrorDatabase, only the rtcab, rtcshared, and rtcxds databases will be mirrored.

-DatabaseType User

Removing or Changing SQL Mirroring

To remove the SQL mirroring of a pool in Topology Builder, you must first use a cmdlet to remove the mirror in SQL Server. You can then use Topology Builder to remove the mirror from the topology. To remove the mirror in SQL Server, use the following cmdlet:

Copy Code 
Uninstall-CsMirrorDatabase -SqlServerFqdn <SQLServer FQDN> [-SqlInstanceName <SQLServer instance name>] -DatabaseType <Application | Archiving | CentralMgmt | Monitoring | User | BIStaging | PersistentChat | PersistentChatCompliance> [-DropExistingDatabasesOnMirror] [-Verbose]

For example, to remove mirroring and drop the databases for the User databases, type the following:

Copy Code 
Uninstall-CsMirrorDatabase -SqlServerFqdn primaryBE.contoso.com -SqlInstanceName rtc -Verbose -DatabaseType User -DropExistingDatabasesOnMirror

The -DropExistingDatabasesOnMirror option causes the affected databases to be deleted from the mirror.

Then, to remove the mirror from the topology, do the following:

  1. In Topology Builder, right-click the pool and click Edit Properties.

  2. Uncheck Enable SQL Store Mirroring and click OK.

  3. Publish the topology.

Removing a Mirroring Witness

Use this procedure if you need to remove the witness from a Back End Server mirroring configuration.

  1. In Topology Builder, right-click the pool and click Edit Properties.

  2. Uncheck Use SQL Server mirroring witness to enable automatic failover and click OK.

  3. Publish the topology.

    After publishing the topology, Topology Builder you will see a message that includes the following

    Copy Code 
    Run the Uninstall-CsMirrorDatabase cmdlet to remove databases that are paired with following primary databases.

    However, do not follow that step, and do not type Uninstall-CsMirrorDatabase as that would uninstall the entire mirroring configuration.

  4. To remove just the witness from the SQL Server configuration, follow the instructions in "Remove the Witness from a Database Mirroring Session (SQL Server)" at http://go.microsoft.com/fwlink/p/?LinkId=268456.