Use the procedure in this section to configure the port used for the internal interface of the Web Conferencing Edge service.

The IP address, certificate, and FQDN that you configure for the internal interface applies to all edge services on the Edge Server. For details about configuring the IP address, certificate, and FQDN for the internal interface, see Configuring the Internal Interface of the Access Edge Service.

Each edge service on an Edge Server requires a separate port number. For details, see Port Requirementsin the Planning and Architecture documentation.

To configure the port used for the internal interface of the Web Conferencing Edge service

  1. On the Edge Server, open Computer Management.

  2. In the console tree, expand Services and Applications, right-click Office Communications Server 2007 R2, and then click Properties.

  3. On the Edge Interfacestab, under Web Conferencing Edge Server, click Configure.

  4. In the Web Conferencing Edge Serverdialog box, under Internal ports, in Data port, specify the port number that your internal Web Conferencing Servers are to use to contact your Web Conferencing Edge service. The default is 8057.

  5. If you have made any changes, restart the Office Communications Server Web Conferencing Edge service.