Applies to: Exchange Server 2010 SP3, Exchange Server 2010 SP2

Topic Last Modified: 2012-07-23

If journaling is enabled in an Exchange organization, either by using journal rules or standard journaling (per-mailbox database journaling), you can create a mailbox that's used for collecting journal reports. This is known as a journaling mailbox.

This topic shows you how to create a journaling mailbox. Additionally, this topic provides the following recommended steps to configure the journaling mailbox.

To learn more about journaling mailboxes and the Journaling agent, see Understanding Journaling.

Important:
Journaling mailboxes contain very sensitive information. You must secure journaling mailboxes because they collect messages that are sent to and from recipients in your organization. These messages may be part of legal proceedings or may be subject to regulatory requirements. Various laws require that messages remain tamper-free before they're submitted to an investigatory authority. We recommend that you create policies that govern who can access the journaling mailboxes in your organization, limiting access to only those individuals who have a direct need to access them. Speak with your legal representatives to make sure that your journaling solution complies with all the laws and regulations that apply to your organization.

Looking for other management tasks related to journaling? Check out Managing Journaling.

Step 1: Use the EMC or the Shell to create a journaling mailbox

You need to be assigned permissions before you can perform this procedure. To see what permissions you need, see the "User mailboxes" entry in the Mailbox Permissions topic.

Use the EMC

  1. In the console tree, click Recipient Configuration.

  2. In the action pane, click New Mailbox.

  3. On the Introduction page, click User Mailbox.

  4. On the User Type page, click New User.

  5. On the User Information page, complete the following fields:

    • Specify the organizational unit rather than using a default one Select this check box to select an organizational unit (OU) other than the default (which is the recipient scope). If the recipient scope is set to the forest, the default value is set to the Users container in the Active Directory domain that contains the computer on which the Exchange Management Console is running. If the recipient scope is set to a specific domain, the Users container in that domain is selected by default. If the recipient scope is set to a specific OU, that OU is selected by default. To select a different OU, click Browse to open the Select Organizational Unit dialog box. This dialog box displays all OUs in the forest that are within the specified scope. Select the desired OU, and then click OK. To learn more about recipient scopes, see Understanding Recipient Scope.

    • First name, Initials, and Last name   Because this mailbox will be used to collect journal reports, it isn't necessary to complete these fields.

    • Name   Use this box to type a display name for the journaling mailbox. This is the name that's listed in Active Directory. By default, this box is populated with the names you enter in the First name, Initials, and Last name boxes. If you didn't use those boxes, you must still type a name in this field. The name can't exceed 64 characters.

    • User logon name (User Principal Name)   Use this box to type the name that the user will use to log on to the journaling mailbox. The user logon name consists of a user name and a suffix. Typically, the suffix is the domain name in which the user account resides.

    • User logon name (pre-Windows 2000)   Use this box to type the name for the user that's compatible with the legacy versions of Microsoft Windows (prior to the release of Windows 2000 Server). This field is automatically populated based on the User logon name (User Principal Name) field. This field is required.

    • Password   Use this box to type the password that the user must use to log on to the journaling mailbox.

      Note:
      Journaling mailboxes can potentially contain sensitive information. We recommend using a complex password that exceeds the password requirements your organization may have for normal user accounts.
    • Confirm password   Use this box to confirm the password that you typed in the Password box.

    • User must change password at next logon   Select this check box if you want the user to reset the password when they first log on to the journaling mailbox.

      If you select this check box, at first logon, the user will be prompted with a dialog box in which to change the password. The user won't be allowed to perform any tasks until the password is successfully changed.

      Requiring a password change at first logon is a good practice for accounts you create for your users. It forces the user to change the password, which prevents the use of any default passwords provided by the administrator during account creation. A forced password change on first logon also ensures that the administrator doesn't have knowledge of the user password after first logon. This may not be necessary for journaling mailboxes because the associated user accounts are created and used by the administrator or by administrator-controlled processes that may access the journaling mailbox.

  6. On the Mailbox Settings page, complete the following fields:

    • Alias   Use this box to type an alias for the journaling mailbox. The alias can't exceed 64 characters and must be unique in the forest.

    • Specify the mailbox database rather than using a database automatically selected   Select this check box to specify a mailbox database instead of allowing Exchange to select a database for you. Click Browse to open the Select Mailbox Database dialog box. This dialog box lists all the mailbox databases in your Exchange organization. By default, the mailbox databases are sorted by name. You can also click the title of the corresponding column to sort the databases by storage group name or server name. Select the mailbox database you want to use, and then click OK. This is an optional field.

      Note:
      When you plan to use journaling, consider the storage requirements for journaling mailboxes. These will vary depending on the number and size of messages captured by the Journaling agent.
    • Managed folder mailbox policy   Select this check box to specify a managed folder mailbox policy for the journaling mailbox. A managed folder mailbox policy is a logical grouping of managed folders. When a managed folder mailbox policy is applied to a user’s mailbox, all the managed folders that are linked to the policy are deployed in a single operation, thereby making the deployment of messaging records management (MRM) easier. To learn more, see Understanding Managed Folders.

      Click Browse to open the Select Managed Folder Mailbox Policy dialog box. Use this dialog box to select the managed folder mailbox policy to be associated with this mailbox. This is an optional field.

      Some third-party archiving or retention solutions retrieve journal reports from the journaling mailbox and store them in an external database, or require you to automatically forward a copy of the journal report to the external database or e-mail address. If you use a similar solution, and if it doesn't automatically purge messages from the journaling mailbox after retrieving them, the journaling mailbox may continue to grow and consume storage space. You can create a managed folder mailbox policy and apply it to the journaling mailbox to automatically purge messages after a certain period.

    • Exchange ActiveSync mailbox policy   Journaling mailboxes are not meant to be accessed by using Microsoft Exchange ActiveSync. You don't have to select this option when you create a journaling mailbox.

  7. On the Archive Settings page, leave the Create an archive mailbox for this account check box cleared.

  8. On the New Mailbox page, review your configuration settings. To make any configuration changes, click Back. To create the journaling mailbox, click New.

  9. On the Completion page, review the following, and then click Finish to close the wizard:

    • A status of Completed indicates that the wizard completed the task successfully.

    • A status of Failed indicates that the task wasn't completed. If the task fails, review the summary for an explanation, and then click Back to make any configuration changes.

Use the Shell

This example creates a journaling mailbox with the following parameters:

  • Name   Vault5

  • User Principal Name   vault@contoso.com

  • Mailbox Database   Database2

After you enter the first command, you are prompted for a password.

Copy Code
$password = Read-Host "Enter password" -AsSecureString
New-Mailbox -Name Vault5 -UserPrincipalName vault@contoso.com -Database "Database2" -Password $password

For detailed syntax and parameter information, see New-Mailbox.

Step 2 (optional but recommended): Use the Shell to configure the journaling mailbox to accept messages only from the Microsoft Exchange recipient

Caution:
This procedure shouldn't be performed in organizations in which the journaling mailbox is required to receive e-mail from non-Exchange mail hosts, unauthenticated senders, or senders other than the Microsoft Exchange recipient.
Note:
You can't use the EMC to perform this procedure because the Microsoft Exchange recipient, a system mailbox, isn't visible in the GAL.

You need to be assigned permissions before you can perform this procedure. To see what permissions you need, see the "User mailboxes" entry in the Mailbox Permissions topic.

This example configures delivery restrictions on a journaling mailbox with the display name Journaling Mailbox to accept messages only from the Microsoft Exchange recipient and to accept messages only from authenticated senders.

Copy Code
Set-Mailbox "Journaling Mailbox" -AcceptMessagesOnlyFromSendersOrMembers "Microsoft Exchange" -RequireSenderAuthenticationEnabled $true

For detailed syntax and parameter information, see Set-Mailbox.

Step 3 (optional but recommended): Use the EMC or the Shell to disable storage quota limits for the journaling mailbox

You need to be assigned permissions before you can perform this procedure. To see what permissions you need, see the "User mailboxes " entry in the Mailbox Permissions topic.

Use the EMC

  1. In the console tree, navigate to Recipient Configuration > Mailbox.

  2. In the result pane, select the journaling mailbox you created.

  3. In the action pane, click Properties.

  4. On the Mailbox Settings tab, select Storage Quotas, and then click Properties.

  5. In Storage Quotas, clear the Use mailbox database defaults check box, and then click OK.

  6. Click Apply, and then click OK.

Use the Shell

This example disables mailbox quotas for the journaling mailbox vault.

Copy Code
Set-Mailbox "vault" -UseDatabaseQuotaDefaults $false -IssueWarningQuota unlimited -ProhibitSendQuota unlimited -ProhibitSendReceiveQuota unlimited

For detailed syntax and parameter information, see Set-Mailbox.

Step 4 (optional but recommended): Grant Full Access permissions to selected users for accessing the journaling mailbox

For detailed instructions about how to grant Full Access permissions to a mailbox, see Manage Full Access Permissions.

Other Tasks

After you create and configure a journaling mailbox, you may also want to perform the following procedures.