Procedures to configure global Web conferencing settings are included in Configure Audio/Video Conferencing and Web Conferencing. All other user configuration settings are described in this section. Ensure that the global settings for desired features are such that they can be configured for individual users.

Note:
For details about using WMI scripting to configure users, see the Using WMI to Configure New Userstopic in the Administering Office Communications Server 2007 R2 section of the Operations documentation.
Important:
If you did not configure your global properties on the Meetingstab to enforce per user, some of the options are not available because they are enforced by the global settings you configured.

To configure users for Office Communications Server

  1. Log on to a server with the Office Communications Server 2007 R2 administrative tools as a member of the RTCUniversalUserAdmins group or with equivalent user rights.

  2. Click Start, click Administrative Tools, and then click Office Communications Server 2007 R2.

  3. Expand the Forestnode, expand the Enterprise poolnode or Standard Edition Serversnode, expand the pool or server name, and then click Users.

  4. Do one of the following:

    • To configure all users for the server, right-click Users, and then click Configure users.

    • To configure an individual user, in the console pane, expand Users. In the details pane, right-click the user account that you want to configure, and then click Configure users.

  5. On the Welcome to the Configure Users Wizardpage, click Next.

  6. Select the check box next to any of the following features that you want to configure for the selected user or users, and then, for each feature, click Enableor Disable, as appropriate:

    • Federation

    • Remote user access

    • Public IM connectivity

    • Enhanced Presence

    • Archive internal messages

    • Archive federated messages

  7. Click Next.

  8. Select the Organize meetings with anonymous participantscheck box, click Allowor Disallow, and then click Next.

  9. Select the Change meeting policycheck box.

  10. In the Select a meeting policy for the userslist, click the name of the policy that you want to apply to the selected users, and then click Next.

  11. To enable or disable Enterprise Voice for the selected users, select the Change Enterprise Voice Settings for selected userscheck box, and then click Enable Enterprise Voiceor Disable Enterprise Voiceas appropriate.

    Note:
    To configure a particular Enterprise Voice setting for a specific user, the corresponding setting under Voice Properties must be configured to allow enforcement on a per-user basis. For details about Enterprise Voice, see Planning for Voicein the Office Communications Server 2007 R2 Planning and Architecture documentation as well as the Deploying Enterprise Voicedocumentation.
  12. To configure the Enterprise Voice policy that will be applied to the selected users, select the Change Enterprise Voice policy for selected userscheck box, and then click the name of the Enterprise Voice policy in the list.

    Note:
    To view the settings configured for a policy, click the name of the policy in the list, and then click View.
  13. To configure the location profile that will be applied to the selected users, select the Change location profile for selected userscheck box, and then click the name of the location profile in the list.

    Note:
    To view the settings configured for a location profile, click the name of the location profile in the list, and then click View.
  14. Click Next.

  15. Verify the settings, and then click Next.

  16. Verify the status of each user configuration operation, and then click Finish.

See Also