Applies to: Exchange Server 2013, Exchange Online

Topic Last Modified: 2012-07-12

Use the New-OrganizationRelationship cmdlet to create a relationship with an external Microsoft Exchange Server 2010 and Exchange Server 2013 organization for the purpose of accessing calendar free/busy information or moving mailboxes between on-premises Exchange servers and the Exchange Online service as part of a hybrid deployment.

For information about the parameter sets in the Syntax section below, see Syntax.

Syntax


New-OrganizationRelationship -DomainNames <MultiValuedProperty> -Name <String> [-ArchiveAccessEnabled <$true \| $false>] [-Confirm [<SwitchParameter>]] [-DeliveryReportEnabled <$true \| $false>] [-DomainController <Fqdn>] [-Enabled <$true \| $false>] [-FreeBusyAccessEnabled <$true \| $false>] [-FreeBusyAccessLevel <None \| AvailabilityOnly \| LimitedDetails>] [-FreeBusyAccessScope <GroupIdParameter>] [-MailboxMoveEnabled <$true \| $false>] [-MailTipsAccessEnabled <$true \| $false>] [-MailTipsAccessLevel <None \| Limited \| All>] [-MailTipsAccessScope <GroupIdParameter>] [-Organization <OrganizationIdParameter>] [-OrganizationContact <SmtpAddress>] [-PhotosEnabled <$true \| $false>] [-TargetApplicationUri <Uri>] [-TargetAutodiscoverEpr <Uri>] [-TargetOwaURL <Uri>] [-TargetSharingEpr <Uri>] [-WhatIf [<SwitchParameter>]]

New-OrganizationRelationship -DomainNames
<MultiValuedProperty> -Name <String>
[-ArchiveAccessEnabled <$true | $false>] [-Confirm
[<SwitchParameter>]] [-DeliveryReportEnabled <$true |
$false>] [-DomainController <Fqdn>] [-Enabled <$true |
$false>] [-FreeBusyAccessEnabled <$true | $false>]
[-FreeBusyAccessLevel <None | AvailabilityOnly |
LimitedDetails>] [-FreeBusyAccessScope <GroupIdParameter>]
[-MailboxMoveEnabled <$true | $false>]
[-MailTipsAccessEnabled <$true | $false>]
[-MailTipsAccessLevel <None | Limited | All>]
[-MailTipsAccessScope <GroupIdParameter>] [-Organization
<OrganizationIdParameter>] [-OrganizationContact
<SmtpAddress>] [-PhotosEnabled <$true | $false>]
[-TargetApplicationUri <Uri>] [-TargetAutodiscoverEpr
<Uri>] [-TargetOwaURL <Uri>] [-TargetSharingEpr
<Uri>] [-WhatIf [<SwitchParameter>]]

Examples

EXAMPLE 1

This example creates an organization relationship with Contoso. The domain name to connect to is contoso.com. The following settings are used:

Free/busy access is enabled.
The requesting organization receives time, subject, and location information from the target organization.

This example attempts to automatically discover configuration information from the external organization by using the domain names provided in the Get-FederationInformation command. If you use this method to create your organization relationship, you must first ensure that you've created an organization identifier by using the Set-FederationOrganizationIdentifier cmdlet.

	Copy Code
Get-FederationInformation -DomainName Contoso.com \| New-OrganizationRelationship -Name "Contoso" -FreeBusyAccessEnabled $true -FreeBusyAccessLevel -LimitedDetails

EXAMPLE 2

This example creates the organization relationship with Fourth Coffee using the following settings. In this example, the connection settings with the external organization are provided.

The domain to connect to is mail.fourthcoffee.com.
The Exchange Web Services application URL is mail.fourthcoffee.com.
The Autodiscover URL is https://mail.fourthcoffee.com/autodiscover/autodiscover.svc/wssecurity.
Free/busy access is enabled.
The requesting organization only receives free/busy information with the time.

	Copy Code
New-OrganizationRelationship -Name "Fourth Coffee" -DomainNames "mail.fourthcoffee.com" -FreeBusyAccessEnabled $true -FreeBusyAccessLevel -AvailabilityOnly -TargetAutodiscoverEpr "https://mail.fourthcoffee.com/autodiscover/autodiscover.svc/wssecurity" -TargetApplicationUri "mail.fourthcoffee.com"

Copy Code

New-OrganizationRelationship -Name "Fourth Coffee" -DomainNames "mail.fourthcoffee.com" -FreeBusyAccessEnabled $true -FreeBusyAccessLevel -AvailabilityOnly -TargetAutodiscoverEpr "https://mail.fourthcoffee.com/autodiscover/autodiscover.svc/wssecurity" -TargetApplicationUri "mail.fourthcoffee.com"

Detailed Description

Before you can create an organization relationship, you must first create a federation trust. For more information, see Federation.

You need to be assigned permissions before you can run this cmdlet. Although all parameters for this cmdlet are listed in this topic, you may not have access to some parameters if they're not included in the permissions assigned to you. To see what permissions you need, see the "Organization relationships" entry in the Recipients Permissions topic.

Parameters

Parameter	Required	Type	Description
DomainNames	Required	Microsoft.Exchange.Data.MultiValuedProperty	The DomainNames parameter specifies the SMTP domains of the external organization. If adding multiple domain names, separate each entry with a comma.
Name	Required	System.String	The Name parameter specifies the meaningful name of the organization relationship.
ArchiveAccessEnabled	Optional	System.Boolean	The ArchiveAccessEnabled parameter specifies whether the organization relationship has been configured to provide remote archive access. Valid input for the ArchiveAccessEnabled parameter is `$true` or `$false`. The default value is `$false`. When the ArchiveAccessEnabled parameter is set to `$true`, the external organization specified in the organization relationship provides remote access to mailbox archives.
Confirm	Optional	System.Management.Automation.SwitchParameter	The Confirm switch causes the command to pause processing and requires you to acknowledge what the command will do before processing continues. You don't have to specify a value with the Confirm switch.
DeliveryReportEnabled	Optional	System.Boolean	The DeliveryReportEnabled parameter specifies whether Delivery Report data should be shared over this organization relationship. The accepted values are `$true` or `$false`. The default value is `$false`. If set to `$true`, this means the following two things: The organization has agreed to share all Delivery Report data with the organization specified in the organization relationship. This organization relationship should be used to retrieve Delivery Report information from the organization referenced in the organization relationship. For message tracking to work in a cross-premise, Exchange scenario, the DeliveryReportEnabled parameter must be set to `$true` on both sides of the organization relationship. If one, or both, of the members of the organization relationship specifies the DeliveryReportEnabled parameter as `$false`, tracking between the organizations won't work in either direction.
DomainController	Optional	Microsoft.Exchange.Data.Fqdn	The DomainController parameter specifies the fully qualified domain name (FQDN) of the domain controller that writes this configuration change to Active Directory.
Enabled	Optional	System.Boolean	The Enabled parameter specifies whether to enable the sharing relationship. This parameter can be used to completely stop sharing for a particular relationship. The valid values for this parameter are `$true` or `$false`. The default value is `$true`.
FreeBusyAccessEnabled	Optional	System.Boolean	The FreeBusyAccessEnabled parameter specifies whether this organization relationship should be used for retrieving free/busy information from the external organization. The valid values for this parameter are `$true` or `$false`. The default value is `$false`.
FreeBusyAccessLevel	Optional	Microsoft.Exchange.Data.Directory.SystemConfiguration.FreeBusyAccessLevel	The FreeBusyAccessLevel parameter specifies the maximum amount of detail returned to the requesting organization. You can use the following values: `None` No free/busy access `AvailabilityOnly` Free/busy access with time only `LimitedDetails` Free/busy access with time, subject, and location
FreeBusyAccessScope	Optional	Microsoft.Exchange.Configuration.Tasks.GroupIdParameter	The FreeBusyAccessScope parameter specifies a security distribution group in the internal organization that contains users that can have their free/busy information accessed by an external organization. You can use the following values: Distinguished name (DN) Canonical name GUID Name Display name
MailboxMoveEnabled	Optional	System.Boolean	The MailboxMoveEnabled parameter specifies whether the organization relationship is used for moving mailboxes to the external organization. If this parameter isn't set, the move requests require an administrator to provide a remote credential for the remote organization. The valid values for this parameter are `$true` or `$false`. The default value is `$false`.
MailTipsAccessEnabled	Optional	System.Boolean	The MailTipsAccessEnabled parameter specifies whether MailTips data for users in this organization are returned over this organization relationship. The accepted values are `$true` or `$false`. The default value is `$false`.
MailTipsAccessLevel	Optional	Microsoft.Exchange.Data.Directory.SystemConfiguration.MailTipsAccessLevel	The MailTipsAccessLevel parameter specifies the level of MailTips data that's externally shared over this organization relationship. This parameter can have the following values: `All` All MailTips are returned, but the recipients in the remote organization are considered external. For the Auto Reply MailTip, the external Auto Reply message is returned. `Limited` Only those MailTips that could prevent a non-delivery report (NDR) or an Auto Reply are returned. Custom MailTips, the Large Audience MailTip, and Moderated Recipient MailTips won't be returned. `None` No MailTips are returned to the remote organization. The default value is `None`.
MailTipsAccessScope	Optional	Microsoft.Exchange.Configuration.Tasks.GroupIdParameter	The MailTipsAccessScope parameter specifies a Security Distribution group in the organization that contains users for whom recipient-specific MailTips are returned over this organization relationship. The recipient-specific MailTips are: Auto Reply Mailbox Full Custom If a group is specified, these MailTips are returned only for those recipients that are members of the specified group. If a group isn't specified, recipient-specific MailTips are returned for all recipients in the organization. By default, no group is specified. This restriction only applies to mailboxes, mail users, and mail contacts. It doesn't apply to distribution groups.
Organization	Optional	Microsoft.Exchange.Configuration.Tasks.OrganizationIdParameter	The Organization parameter is reserved for internal Microsoft use.
OrganizationContact	Optional	Microsoft.Exchange.Data.SmtpAddress	The OrganizationContact parameter specifies the email address that can be used to contact the external organization, for example, administrator@fourthcoffee.com.
PhotosEnabled	Optional	System.Boolean	The PhotosEnabled parameter specifies whether photo data for users in this organization are returned over this organization relationship. The accepted values are `$true` or `$false`. The default value is `$false`.
TargetApplicationUri	Optional	System.Uri	The TargetApplicationUri parameter specifies the target Uniform Resource Identifier (URI) of the external organization. The TargetApplicationUri parameter is specified by Exchange when requesting a delegated token for the external organization to fetch free and busy information, for example, mail.contoso.com.
TargetAutodiscoverEpr	Optional	System.Uri	The TargetAutodiscoverEpr parameter specifies the Autodiscover URL of Exchange Web Services for the external organization, for example, https://contoso.com/autodiscover/autodiscover.svc/wssecurity. Exchange uses the Autodiscover service to automatically detect the correct Client Access server endpoint for external requests.
TargetOwaURL	Optional	System.Uri	The TargetOwaURL parameter specifies the Microsoft Office Outlook Web App URL of the external organization defined in the organization relationship. It is used for Outlook Web App redirection in a cross-premise Exchange scenario. Configuring this attribute enables users in the organization to use their current Outlook Web App URL to access Outlook Web App in the external organization.
TargetSharingEpr	Optional	System.Uri	The TargetSharingEpr parameter specifies the URL of the target Exchange Web Services for the external organization. If the TargetSharingEpr parameter is used, Exchange always uses this URL to reach the external Client Access server and doesn't use the TargetAutodiscoverEpr parameter information to locate the Client Access server.
WhatIf	Optional	System.Management.Automation.SwitchParameter	The WhatIf switch instructs the command to simulate the actions that it would take on the object. By using the WhatIf switch, you can view what changes would occur without having to apply any of those changes. You don't have to specify a value with the WhatIf switch.

Input Types

To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn’t accept input data.

Return Types

To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn’t return data.