Applies to: Exchange Server 2007 SP1
Topic Last Modified: 2009-08-27
Microsoft has released Update Rollup 9 for Exchange Server 2007 Service Pack 1. This article describes the issues that the update rollup fixes.
- The issues that the update rollup fixes
- How to obtain the update rollup
For More Information
Issues That the Update Rollup Fixes
Update Rollup 9 for Exchange Server 2007 Service Pack 1 fixes the issues that are described in the following Microsoft Knowledge Base articles:
|
A non-delivery report (NDR) is returned when a user sends an e-mail message to an X.400 address that includes the slash field separator |
|
|
An error message is returned when you run the Get-Recipient command in an Exchange Management Shell that uses a Windows 7 domain controller |
|
|
You cannot log on to a hidden mailbox by using Base64 authentication for IMAP4 or for POP3 in an Exchange Server 2007 Service Pack 1 environment |
|
|
Event ID 1009 is logged when you use an application to access a shared mailbox by using the POP3 protocol in Microsoft Exchange 2007 Service Pack 1 |
|
|
The Microsoft Exchange Replication service on a Standby Continuous Replication (SCR) target server continually crashes when you enable SCR for a storage group on an Exchange Server 2007 Service Pack 1-based computer |
|
|
Event ID 4999 is logged when an administrator deletes a mailbox store on an Exchange Server 2007 Service Pack 1-based server |
|
|
Monthly recurring meetings are declined if the "Schedule only during working hours" option is enabled in Exchange Server 2007 Service Pack 1 |
|
|
The Update-Recipient command does not update specified domain controller parameters when you use Identity Lifecycle Manager (ILM) 2007 to migrate mail users to mailbox users in Exchange Server 2007 Service Pack 1 |
|
|
Error 4 is returned when you synchronize a supported list of contact properties by using Exchange ActiveSync in Exchange Server 2007 Service Pack 1 |
|
|
Mobile users whose location is set to New Zealand cannot synchronize an exceptional occurrence after the daylight saving time (DST) update that is described in KB 951072 is installed on an Exchange Server 2007 Service Pack 1 Client Access server (CAS) |
|
|
An image attachment appears as a red "X" when you send an RTF e-mail message from an Exchange Server 2007 organization to an external recipient |
|
|
The transport rule "when the Subject field or the body of the message contains text patterns" does not work accurately on an Exchange Server 2007 Service Pack 1-based computer |
|
|
Entourage clients cannot synchronize with mailboxes that are located on a computer that is running Exchange 2007 Service Pack 1 and Windows Server 2008 |
|
|
Error message when an Exchange Server 2007 Service Pack 1 user tries to delete a calendar item in OWA: "Outlook Web Access has encountered a Web browsing error" |
|
|
Error message after an Exchange Server 2007 Service Pack 1 user replies to a message that has more than 300 recipients in Outlook Web Access (OWA): "Microsoft Exchange issued an unexpected response (500)" |
|
|
The System Attendant (SA) resource is not brought online or offline during a failover in an Exchange 2007 Service Pack 1 cluster environment |
|
|
Outlook clients are directed to global catalogs from the wrong domain if you are using a split session configuration to enable Outlook clients to access their mailboxes through an RPC/HTTP proxy server in Exchange Server 2007 Service Pack 1 |
|
|
You still receive unexpected error messages when you run the Test-OwaConnectivity command or the Test-ActiveSyncConnectivity command after you apply hotfix KB954213 on an Exchange 2007 Service Pack 1-based server |
|
|
Mailboxes do not follow E-mail Lifecycle (ELC) configuration or storage limitation policies in Exchange Server 2007 Service Pack 1 |
|
|
Error message when a user tries to perform an address book search by using Outlook Web Access in an Exchange Server 2007 Service Pack 1 environment: “The item that you attempted to access appears to be corrupted and cannot be accessed.” |
|
|
The Store.exe process crashes when you use a WebDAV application to connect to Exchange Server 2007 Service Pack 1 |
|
|
Exchange Server 2007 Service Pack 1 crashes when the Extensible Storage Engine (ESE) version store is out of memory on a computer that is running Windows Server 2008 |
|
|
Some messages are stuck in the Outbox folder or the Drafts folder on a computer that is running Exchange Server 2007 Service Pack 1 |
|
|
Public folder replication messages stay in the local delivery queue and cause an Exchange Server 2007 Service Pack 1 database to grow quickly |
|
|
The EdgeTransport.exe process on a computer that is running Exchange Server 2007 Service Pack 1 crashes when a MIME message that contains iCAL items for a recurring meeting has more than 999 occurrences |
|
|
The Microsoft Exchange Information Store service crashes when you use a Data Protection Manager (DPM) 2007 server to perform a snapshot backup for an Exchange Server 2007 server |
|
|
An HTTP 500 error message is returned when you send a message that has a large attachment by using Outlook Web Access (OWA) with S/MIME installed in Exchange Server 2007 Service Pack 1 |
|
|
Exchange Server 2007 Service Pack 1 servers continue to contact a domain controller even after you exclude it by using the Set-ExchangeServer command |
|
|
Both public logons and private logons that connect to a Client Access server (CAS) proxy are processed as private logons on an Exchange Server 2007 Service Pack 1-based server |
|
|
E-mail address properties of contacts changed through Exchange Web Services (EWS) are not updated in Outlook or Outlook Web Access (OWA) in Exchange Server 2007 Service Pack 1 |
|
|
The Microsoft Exchange Information Store service crashes every time that a specific database is mounted on a computer that is running Exchange Server 2007 Service Pack 1 |
|
|
When you change the location field of a recurring calendar item to empty in Exchange Server 2007 Service Pack 1, the location field is set to the default value of the recurring series if this recurring item is synchronized on a Windows Mobile device |
|
|
If a sender requests a delivery receipt in an e-mail message, a delivery status notification (DSN) message is returned that has a blank subject in the body even though the original message contains a subject in Exchange Server 2007 Service Pack 1 |
|
|
You receive an error message when you try to use the "New-Mailbox" command to create more than 1000 users who have the same “mailNickname” attribute (alias) in Exchange Server 2007 Service Pack 1 |
|
|
The Exchange Impersonation feature does not work if a cross-forest topology has only a one-way trust relationship between forests in Exchange Server 2007 Service Pack 1 |
|
|
Some databases are not mounted on the target server after you use the Move-ClusteredMailboxServer command to transfer a clustered mailbox server (CMS) to an available passive cluster node in Exchange Server 2007 Service Pack 1 |
|
|
The reseed process is unsuccessful on the CCR passive node after you restore one full backup and two or more differential backups to the CCR active node in Exchange Server 2007 Service Pack 1 |
|
|
Transaction log files grow unexpectedly in an Exchange Server 2007 Service Pack 1 mailbox server on a computer that is running Windows Server 2008 |
|
|
The "eseutil /k" command takes a long time to verify the checksum of transaction logs in Exchange Server 2007 Service Pack 1 |
|
|
HTML e-mail messages that have a charset META tag that differs from the MIME charset tag are garbled when they are processed through disclaimer rules in Exchange Server 2007 Service Pack 1 |
|
|
Outlook crashes when you try to use Outlook to view e-mail messages that are arranged by subject in Exchange Server 2007 Service Pack 1 |
|
|
Memory leaks occur in the Powershell.exe process when you run the Get-MailboxStatistics command and the Get-PublicFolderStatistics command in Exchange Server 2007 Service Pack 1 |
|
|
A move operation between an Exchange Server 2003-based server and an Exchange Server 2007 Service Pack 1-based server fails if the SimpleDisplayName attribute of a mailbox in the Exchange Server 2003-based server contains a single quotation mark |
|
|
An error message is returned when a user tries to change a recurring appointment in Office Outlook Web Access that was created in Outlook 2007 in Exchange Server 2007 Service Pack 1 |
Change in transport rule condition
Update Rollup 9 for Exchange 2007 SP1 includes a change to the “when the Subject field or the body of the message contains text patterns” condition that is used to create a transport rule. Previously, this condition matched any strings that contained the word that was specified. For example, if you defined “change” as the specific word, any strings that contained “change,” such as “Exchange” or “changes,” would be considered a match. Starting with Update Rollup 9 for Exchange 2007 SP1, this condition is matched only by the actual word, where “word” is defined as any group of letters or digits that are surrounded by non-word characters. Non-word characters are characters other than letters or digits.
Given this change, if you intend for an existing rule to match only the actual word, no action is required. Existing rules will be recompiled after Update Rollup 9 or Exchange 2007 SP2 is installed and the Microsoft Exchange Transport service is restarted. However, any rules that are based on the old behavior (pattern match) will not work after Update Rollup 9 is installed. In this case, you must rebuild your transport rules to specify that a subject, body, from address, or header contains text patterns instead of specific words. For example, to obtain a pattern match rather than a word match, a transport rule that contains a "when the from address contains specific words" condition must be changed to "when the from address contains text patterns."
Service Pack Information
These issues are fixed in Microsoft Exchange Server 2007 Service Pack 2 (SP2). Microsoft released Exchange Server 2007 SP2 in August 2009.
To obtain Exchange 2007 SP2 from the Microsoft Download Center, see Exchange Server 2007 Service Pack 2.
For more information about the issues that are fixed in Exchange 2007 SP2, see Issues That Are Fixed in Exchange Server 2007 Service Pack 2.
Update Rollup Information
Update Rollup 9 for Exchange Server 2007 SP1 was released on July 16, 2009. To obtain this update rollup from the Microsoft Download Center, see Update Rollup 9 for Exchange Server 2007 Service Pack 1.
 Important: |
|---|
| Before you install an update rollup or a service pack, see How to Install the Latest Service Pack or Update Rollup for Exchange 2007 for prerequisites, installation instructions, and known issues. Before you apply an update rollup to clustered Mailbox servers, see Applying Exchange 2007 Update Rollups to Clustered Mailbox Servers. |
For more information about the Exchange 2007 servicing model, see Exchange 2007 Servicing.
For a list of update rollups that apply to Exchange Server 2007 SP1, see the "Update rollups for Exchange Server 2007 Service Pack 1" section in How to Obtain the Latest Service Pack or Update Rollup for Exchange 2007.
This update rollup does not apply to Exchange Server 2007 release to manufacturing (RTM) version or to Exchange 2007 Service Pack 2 (SP2). The series of update rollup packages for Exchange Server 2007 SP1 is independent of the corresponding series of update rollups for Exchange Server 2007 RTM or Exchange 2007 SP2.