See Also
Topic Last Modified: 2012-08-11
Modifies an existing Response Group agent group. An agent group is a collection of agents assigned to a Response Group queue. Agents are the users assigned to answer calls directed to a particular queue. This cmdlet was introduced in Lync Server 2010.
Syntax
Set-CsRgsAgentGroup -Instance <AgentGroup>
[-Confirm [<SwitchParameter>]] [-Force
<SwitchParameter>] [-WhatIf [<SwitchParameter>]]
|
Examples
EXAMPLE 1
The commands shown in Example 1 modify the RoutingMethod property for the Response Group agent group Help Desk (found on the service ApplicationServer:atl-cs-001.litwareinc.com). To perform this task, the command first uses the Get-CsRgsAgentGroup cmdlet to retrieve the Help Desk agent group (-Name "Help Desk") from ApplicationServer:atl-cs-001.litwareinc.com. After retrieval, the agent group object is stored in a variable named $x.
Command 2 in the example modifies the value of the RoutingMethod property. In the final command in the example, the Set-CsRgsAgentGroup cmdlet is used to write these changes to the actual Help Desk agent group.
 Copy Code |
|
|---|---|
$x = Get-CsRgsAgentGroup -Identity service:ApplicationServer:atl-cs-001.litwareinc.com -Name "Help Desk" $x.RoutingMethod = "RoundRobin" Set-CsRgsAgentGroup -Instance $x |
|
EXAMPLE 2
Example 2 shows how you can change the distribution group assigned to a Response Group agent group. This is done by first using Get-CsRgsAgentGroup to return the agent group to be modified; in this example, that’s the Help Desk group (-Name "Help Desk ") found on the service ApplicationServer:atl-cs-001.litwareinc.com. After Get-CsRgsAgentGroup returns this group, the resulting object is stored in a variable named $x.
The second command in the example assigns a new value (helpdesk@litwareinc.com) to the DistributionGroupAddress property. After the new value has been assigned, Set-CsRgsAgentGroup is then used to write the changes to the Help Desk agent group on ApplicationServer:atl-cs-001.litwareinc.com.
| Copy Code |
|
|---|---|
$x = Get-CsRgsAgentGroup -Identity service:ApplicationServer:atl-cs-001.litwareinc.com -Name "Help Desk" $x.DistributionGroupAddress = "helpdesk@litwareinc.com" Set-CsRgsAgentGroup -Instance $x |
|
EXAMPLE 3
The commands shown in Example 3 add a new agent to the Response Group agent group Help Desk. To do this, the example first uses Get-CsRgsAgentGroup to return the Help Desk group (-Name "Help Desk") from the service ApplicationServer:atl-cs-001.litwareinc.com. The retrieved object is stored on a variable named $x.
In the second command, the Add method is used to add a new agent to the AgentsByUri property; this is done by specifying the SIP address of the new agent ("sip:kenmyer@litwareinc.com"). In command 3, the Set-CsRgsAgentGroup is used to write the changes (that is, the addition of the new agent) to the Help Desk group. Note that if you do not call Set-CsRgsAgentGroup, the changes will be made in memory only, and will not be applied to the actual agent group.
| Copy Code |
|
|---|---|
$x = Get-CsRgsAgentGroup -Identity service:ApplicationServer:atl-cs-001.litwareinc.com -Name "Help Desk"
$x.AgentsByUri.Add("sip:kenmyer@litwareinc.com")
Set-CsRgsAgentGroup -Instance $x
|
|
EXAMPLE 4
In Example 4, an agent is removed from the Response Group agent group Help Desk found on the service ApplicationServer:atl-cs-001.litwareinc.com. To do this, the example first uses Get-CsRgsAgentGroup to return the Help Desk group (-Name "Help Desk") from ApplicationServer:atl-cs-001.litwareinc.com. The retrieved agent group object is stored in a variable named $x.
After the agent group has been retrieved, the Remove method is used remove an agent (the agent with the SIP address "sip:kenmyer@litwareinc.com") from the group. In command 3, the Set-CsRgsAgentGroup is then called to write the changes (in other words, to remove the agent) from the group. If you do not call Set-CsRgsAgentGroup, the changes will be made in memory only, and will not be applied to the actual agent group; the agent will be removed only if you call Set-CsRgsAgentGroup.
| Copy Code |
|
|---|---|
$x = Get-CsRgsAgentGroup -Identity service:ApplicationServer:atl-cs-001.litwareinc.com -Name "Help Desk"
$x.AgentsByUri.Remove("sip:kenmyer@litwareinc.com")
Set-CsRgsAgentGroup -Instance $x
|
|
Detailed Description
When someone calls a phone number associated with the Response Group application, the service starts by determining which workflow corresponds to the number called. Based on the configuration of that workflow, the call might be routed to a set of interactive voice response (IVR) questions (in which the caller is asked one or more questions along the lines of "Is this question about hardware support or software support?"). Alternatively, the call might be placed in a Response Group queue; there the caller will be put on hold until a designated person is available to answer the call. The people designated to answer calls are known as agents, and a collected group of agents are referred to as a Response Group agent group. Agent groups are associated with workflows, and are further associated with like job responsibilities: help desk personnel might be grouped in the Help Desk agent group while customer support agents might be grouped in the Customer Support agent group.
New agent groups are created by using the New-CsRgsAgentGroup cmdlet. If you need to make changes to an agent group after it has been created, use the Set-RgsAgentGroup cmdlet; among other things, this cmdlet can be used to add and remove individual agents from a group. Note that Set-CsRgsAgentGroup does not directly modify the properties of an agent group. If you need to modify a group, you must first create an object reference to that group; this is done by calling Get-CsRgsAgentGroup to retrieve the group and then storing the returned object in a variable. After the object reference has been created, you then make changes to the group properties in memory. When you have finished making your modifications, you must then call Set-CsRgsAgentGroup to write the changes to the actual Response Group agent group. If you do not call Set-CsRgsAgentGroup, your changes will exist in memory only, and will disappear as soon as you close Windows PowerShell or delete the object reference variable.
Who can run this cmdlet: By default, members of the following groups are authorized to run the Set-CsRgsAgentGroup cmdlet locally: RTCUniversalServerAdmins. To return a list of all the role-based access control (RBAC) roles this cmdlet has been assigned to (including any custom RBAC roles you have created yourself), run the following command from the Windows PowerShell prompt:
Get-CsAdminRole | Where-Object {$_.Cmdlets –match "Set-CsRgsAgentGroup"}
Parameters
| Parameter | Required | Type | Description |
|---|---|---|---|
|
Instance |
Required |
Microsoft.Rtc.Rgs.Management.WritableSettings.AgentGroup |
Object reference to the Response Group agent group to be modified. An object reference is typically retrieved by using the Get-CsRgsAgentGroup cmdlet and assigning the returned value to a variable; for example, this command returns an object reference to the Help Desk agent group and stores that object reference in a variable named $x: $x = Get-CsRgsAgentGroup -Identity service:ApplicationServer:atl-cs-001.litwareinc.com -Name "Help Desk " |
|
Confirm |
Optional |
System.Management.Automation.SwitchParameter |
Prompts you for confirmation before executing the command. |
|
Force |
Optional |
System.Management.Automation.SwitchParameter |
Suppresses the display of any non-fatal error message that might occur when running the command. |
|
WhatIf |
Optional |
System.Management.Automation.SwitchParameter |
Describes what would happen if you executed the command without actually executing the command. |
Input Types
Microsoft.Rtc.Rgs.Management.WritableSettings.AgentGroup object. Set-CsRgsAgentGroup accepts pipelined instances of the Response Group agent group object.
Return Types
Set-CsRgsAgentGroup does not return any objects or values. Instead, the cmdlet modifies existing instances of the Microsoft.Rtc.Rgs.Management.WritableSettings.AgentGroup object.
